Just a quick question: What does the blue LED shining through the little hole at the bottom of the RA housing indicate? Thanks - Shane -- Shane Ramotowski kor@... https://www.kor-astro.net

Astro-Physics 130GTX & 92mm Stowaway telescopes SIDE by SIDE on an AP Mach2GTO mount https://www.youtube.com/watch?v=8YwNiAu4qFE Astro-Physics 130GTX & 92mm Stowaway telescopes SIDE by SIDE on a Mach2

I having a problem with my new Mach 2 which was just installed yesterday. I'm using the Ethernet connection, APCC and TSX. Initialization and connection to TSX went fine. There are absolutely no obstr

What are your thoughts? I will 99% of the time just be transporting my ATS Portable Pier with my 1100 GTO to the backyard to set up. I will uninstall if I move it by vehicle. Do you leave yours instal

Tonight, I just got the notification on the availability of a new AP1100. What should I do? Prior to the $1700 price increase, I was thinking I would get the 1st available Mach2 or AP1100, but the big

My chief financial officer (a.k.a. wife) has given me tentative approval to purchase a set of absolute encoders for my 1100 GTO mount, and I have added my name to the notification list when a set beco

Received my Mach2 last Monday, and, believe it or not, it’s been clear here every night since, and it appears that will continue for a couple more nights. I’m very happy with it. I’ve put some images

Would anyone know the size of the rings? Judging by the Powerwerx site I think they are either 3/8 or 1/4 inch but not sure. Thanks Bob

Does AP have a Polemaster adapter for my Mach2? David C. Finch

Hi All. I received the Re-grease Kit for my GTO Mach1 today. I read through the instructions twice, but the steps are still not clear. The document jumps around quite a bit and covers so many differen

Hi, While waiting for my Mach2 to be shipped, I would like to familiarize myself with APCC-PRO. The plan was to install (which I did) and register the trial version until I get the license included wi

Hello, I am unable to activate Pempro. I just received my mount and have everything else connected and up and running but for the life of me I can't get Pempro activated. I have searched the forums (s

The RA axis on my Mach1GTO (104xx series) is getting quite sticky in RA. I've searched and found reference to the nylon clutch plugs sticking (not sure it applies to this mount) and reference to docum

Hi gang, I am the proud owner of a brand new (well 2 weeks) Mach2 and tried to do my first APPM model tonight. I'm having problems with the dome control and hope someone can point in the right directi

Got my notification today! What are the weights needed for ax40 pound load on a ap1100? Thanks!

Just received my Mach2 and very happy with it. Until I get a permanent setup, I set up and break down my system just about every time I use it. I have APPM working, but I was thinking last night that

Normally, I have SGPro do the meridian flip, but I’d like to set my Mach2 up to stop at some time past the meridian as a safety, in case my computer dies. I realize I could edit the meridian limits, b

I will put in my 2 cents on this. Back in the day I put my name on the list for a 400 as I wanted a smaller mount to go with the 600E. I wound up with a Mach1 as the 400 was superseded by the larger m

We have the first clear night that we've had in a while. I noticed that APCC had been updated, so I installed it. When I started the latest version, it flagged my CP4 firmware as out of date. I would

If one were to ship a 1600, first generation back to AP, would you folks be able to do an absolute encoder install on it? Time needed for that? Moving from SE Arizona to very rural and dark NM. Observ