I am having an issue with trying to change from using the default IP address for my GTOCP4 to a DHCP assigned one. I have been connecting with the default one until now (direct connection from GTOCP4

Congrats on an Amazing run Roland!!! 🔭 Did you continue the numbering sequence into the GTX scopes? Needless to say I’m the proud owner/operator of a 130GT (13063-164). 😎 Pete

Fault in the GTOCP4 controller. Sounds like a minor fix.

Hello everybody, I recently purchased a used 1200DA mount that had the QMD + DSC encoder upgrade, and it has a problem that I'm wondering if anyone out there has experienced. The RA axis is very stiff

Trying to figure out how to design meridian limits to enable tracking from the east side as soon as possible. That is to start with counterweights Up if within limits, or if not, to flip as early as p

Hi All, Here are links to newly released versions of APCC Standard, Pro, and AP V2 ASCOM driver. AP V2 ASCOM driver 5.50.03 (Release) This includes a fix for the issue reported by Linwood earlier toda

Hi everybody, I hope you are doing well. I am in the process of installing my software etc on a brand-new PC. While trying to install APCC, I was stopped by the following message that I keep getting.

I am curious if AP has any plans to produce a Harmonic Drive mount? I recently purchased a Rainbow Astro RST-135E because I was looking for a light weight portable mount I could use for Solar imaging

Hi This has started a while ago. I am no longer able to plate solve with APPM. I am using TheSkyX and this is working perfectly in Voyager and in the Sky itself. I attempt to do a plate solve and reca

Hi A-P. I am on the waiting list for an 1100 GTO mount to use with a 180mm Scope. Scope should arrive in June, and am wondering what the current outlook is for the next batch of 1100 mounts? I have al

I suppose that today could technically be called late Winter or Spring. Is there any update on when there may be some Renishaw encoders available for those on the waiting list to purchase them ? The A

Hi, I'm seeing this happen more and more frequently (several times last night, for example): everything seems to be working, and then all of the applications that connect to the mount (NINA, PHD2, Car

Hi Has any used the 3 point polar align routine in NINA’s latest Beta version. I am unable to get the mount to slew from within the NINA”s automatic mode PA routine. I constantly get the error message

I uploaded with the latest version of APCC (v1.9.4.3) and every time I enter/exit software I'm getting an amber pop-up about Park 1 Position not being recognized. There is a check box to have the mess

Hello. Please excuse my ignorance on this, but how do people create pointing and tracking models with their AP mounts w CP3 or CP4 controllers, especially for field setups? I have heard that one does

Does anyone know of a Guide Scope with Crayford style focuser or something similar that will take an Optec FT Focus Motor and still work with the AP Quick Release Guider Bracket Kit (S1060QRGB)? I am

I am looking at trying to build a pointing model, but before I go to the trouble, I am curious to know if a pointing model will work with portable mounts ? I set up and take down my mount every imagin

Hi all, I made a video of images taken with my AP900 mount. I hope you enjoy! Thank you Astro-Physics! - Nick https://www.youtube.com/watch?v=zDfb_gxJP00

I have looked far and wide in this forum. There is a lot of discussions about the Pegasus power boxes, but is there no recommendation for a battery for a Mach2GTO in the field under far away dark skie

Hi all. I normally store my AP1200 under a portable Gazebo, which is then covered by a Tarp . This is semi permanently setup in my front yard. The mount has counterweights left on the shaft but the sc