Okay thanks guys for you input !!! Concerning the file VNET-P01-02.net, it's not a big deal for me because I'm not using the WiFi connection. As for troubleshooting, it could be a good idea to permit

Just see this...thanks Tom ! Yves Le 12/07/22 15:54, Tom Zepf <tjzcos@...> a écrit : In the release notes for the firmware, I believe it explains that the network (VNET) update is only needed for late

Thanks Mike ! Yves Le 12/07/22 15:53, Mike Hanson <mikeh@...> a écrit : Yves, There are multiple configurations of Wi-Fi radio hardware due to obsolescence. They use different and incompatible firmwar

Le 12/07/22 15:40, midmoastro <teche70@...> a écrit : What method of connection did you use? USB/serial? Ethernet? USB/serial in using Java. What version are you currently running? It was firmware ver

Also, my GTOCP4 was well connected to the COM port. Yves Le 12/07/22 14:55, Yves Laroche <yves.laroche@...> a écrit : Hi Todd, The first thing I've done but without success. My computer was correctly

Hi Todd, The first thing I've done but without success. My computer was correctly connected to the web but no file was downloaded. Maybe a server glitch... Regards, Yves Le 12/07/22 14:41, midmoastro

Since I've upgraded both my Mach2 and 1100GTO to (VCP5-P02-13) and (VCP4-P02-13) can I now switch the keypad back and forth between mounts? Currently it's on version 4.19.5 and only works with the 110

I'm in a thread on Cloudy Nights where someone is writing their own code (for Mac) to plate solve and sync their Mach2. They've been pointed here, but the thread on Cloudy Nights is continuing... Anyw

Pretty impressive!! https://www.nasa.gov/image-feature/goddard/2022/nasa-s-webb-delivers-deepest-infrared-image-of-universe-yet

I downloaded the full rez version and the gravitationally lensed galaxies actually have detail! That’s pretty darn awesome in my book….

No, not at all. Forget fussing about balance on this mount. Rolando

Hi folks, I am unable to get my GTOCP5 on my home wifi network. I am able to connect via direct ethernet and even could connect via direct wifi access point. Just that I cannot get it to join my home

I have been trying to troubleshoot excessive slew warnings (over 50%) when building models in APPM. From observing the Dec coordinate values in APPC I believe it is the Dec axis. Here is what I have d

One thing I’ve discovered, now that I have the Meade 16” on a 1600GTO, which is virtually friction-free when the gear boxes are released, is how even small differences in load at the eyepiece, or posi

Progress has resumed. After returning from a trip to Europe, then enduring a second bout of COVID (despite being vaxed and boosted), I allowed my son to come over to the house. We took down the scope,

As promised, I have run our Mach2 mount with a 130 GTX tonight showing how the axes respond to the model that I made with the keypad. This model is then stored in the CP5 and can be played back at any

Hi AP - I want to ask the group if I am NOT supposed to remove this gear when Cleaning & Regreasing which it seems the instructions are advising me. rgds & thanks, Mike

Since receiving the Mach2, the 1100GTO has been patiently waiting in cases. Tonight I set it up in attempt to gather some data on Saturn. Lots of dew tonight; Saturn is low so things are still pretty

Thanks for the review Tony! Sorry to hear about the issues and hope your able to sort out the refund. TEC had a turret years ago… may be offering one in the future according to the link below. https:/

My motor cable is no bueno, when I initialize the mount, only one axis will respond and a stall error is thrown. Swapping the motor connections moves the problem to the other axis. I am not sure which