I'm a bit wary of all these updates to mount firmware and APCC Pro because I see them as mainly for Mach2 users. I'm on P01 firmware and APCC Pro 1.7.1.5 and WiFi 04 and I'm scared of going to P02 and

How much current can I draw through the Anderson Powerpole passthrough on the Mach2GTO? Or alternatively, what is the AWG & length of the internal wiring, and are the Powerpole connectors 15, 30 or 45

Hello All, The question is "what is the shape of the field curvature with and without flatteners and compressors, and how does it change with spacing". Without any flatteners/compressors the typical f

Hello all, I am on the AP1100 list, however, when I put my name on the list, I believe I only wanted the AP1100 mount without the encoders. I am now going to change my mind and get the encoder version

Hi Ray, While I was troubleshooting the declination axis motor issue with my Mach2, I noticed something that looks like a bug in APCC Pro 1.8.8.11 on the AE tab. If I start the homing process by press

Aloha All, Not sure if I'm doing something wrong or missed a setting somewhere in APCC Pro. Couldn't find anything in the documentation. Anyway, after I start apcc, everything connects automatically,

Hello friends, I thought I'd share my latest image of van den Bergh 14 and 15 in Camelopardalis. This image was taken with a tandem refractor setup mounted on an AP1100GTO CP4. I was a little surprise

I Need the width and thread size of threaded top end of 1.875” counterweight shafts. Thanks in advance, Mark

It's summer here in the Southern Hemisphere and I'm learning how the modeling works in my Mach2. Two nights ago the temperature at night was high, around 20ºC and in almost all the frames of that nigh

I'm trying to correct my pier's N/S and E/W positions in my dome, so I stuck a camera in the middle of my scope's lens cap and ran a tape marker down the length of the dome shutter. I'm then trying to

This weekend, I updated to the latest APCC version. when using Maxim DL6.26, and an updated Win10. I live in denmark (EU), and have learned early on (around 2014ish, I think) that in order to make APC

There are a couple of Mach2 threads on Cloudy Nights. Last night, someone posted a couple of sample images here: https://www.cloudynights.com/topic/694300-mach2-waiting-list/?p=10752413 I would be int

How do I disable (make it not-on top) the APCC always-on-top main window? I figured it out for the AP ASCOM driver, but can't find that setting in APCC.

Today I replaced the Mach1 in the observatory with the new Mach2 I received a few days ago. I have a Tak FSQ106 mounted on the Mach2 and it balanced without any problems. I tested a slew and everythin

Hi everyone. My first post on here. Though I would share my first image with the Mach2. I’ve only had a few clear night since receiving it last week but was able to get some data on the hearth Nebula

Triple piggy back works! Shot taken with the SV80, weights are nearly maxed out.

Merry Christmas Tony 🎄 Hope Santa 🎅🏻 was good to Charlie and Moose! Pete

I remember to have read some time ago, that AP1100 mounts will be ready for delivery starting January 2021. Is this still the case? Kind Regards, Horia

Thought I would share this about a week after the article was published. Microsoft unleashes ‘Death Star’ on SolarWinds hackers in extraordinary response to breach - GeekWire There is a lot of talk on