Altitude at park 3 should be 47 degrees. Site is correct. This happened before, not sure what the problem is. Wayne

Having finished my re-greasing, which involved removing the motors, I had to redo my PEC. I ran 6 worm cycles in PEMPro last night and generated a PE curve this morning. In the workflow PEMPro says to

I set up the meridian limits using APCC last night, and I have to say that it’s a very useful and easy-to-do process. It’s one of those things that you can read about, but you really need to do it to

I’ve used my MGBoxV2 with APCC on my old computer with no problem, but I’m switching to a PrimaLuceLab Eagle 4, and I have a problem getting the MGBoxV2 connected. I’m pretty sure I’ve installed all t

GTX + 16803 + Mach 2 should be illegal. 🙂 Excellent star HFD on focus, all the frames tonight are excellent in terms of star roundness. Not guiding at all.

Hi All. I received the Re-grease Kit for my GTO Mach1 today. I read through the instructions twice, but the steps are still not clear. The document jumps around quite a bit and covers so many differen

Beautiful mounts! Hey Moose 👋! Get Outlook for iOS

My buddy Tom's Mach1 and my Mach2 compared. Astro-Physics Mach1GTO vs Mach2GTO Mount - a comparison https://www.youtube.com/watch?v=1Hla5MIwYrk tony

Been saving up to buy a used Mach1. Should be there by next Wednesday. If any of you new Mach2 owners have a Mach 1 you are willing to sell please contact me via private message/email. If the moderato

So like a buffoon I didn't have full charge on my battery but I let it run it's course as much as it could. Thankfully it made it through the imaging for the evening with no problems. Hours later when

Bill Long has shared a OneDrive file with you. To view it, click the link below. TestShot_20210310_220951.fit I have more work to do, but here is a PHD2 graph in its entirety from the Mach 2, 5 min Lu

Has anybody been able to make counterweight up slews work in APCC Pro when using Sequence Generator Pro Framing and Mozaic wizard to initiate the slew?

I ended up "modifying" an Astro-Physics DOVEKREP so it would work with the 1600GTO Mount. Modifying an Astro-Physics DOVEKREP to fit a 1600GTO Mount https://www.youtube.com/watch?v=ULDkyZh4GqM tony

Hello all! I'll soon receive a brand new AP1100 mount which I'll be using for my C14 EdgeHD and AP160 scopes. Is it crazy to even consider mounting these two OTAs side by side on the AP1100? I should

Astro-Physics 130GTX & 92mm Stowaway telescopes SIDE by SIDE on an AP Mach2GTO mount https://www.youtube.com/watch?v=8YwNiAu4qFE Astro-Physics 130GTX & 92mm Stowaway telescopes SIDE by SIDE on a Mach2

This question is only in reference to the GTO mount, not the ota. So is it only the control box that should be protected against a heavy dew? Aside from the socket covers, does anyone use anything lik

Tonight, I just got the notification on the availability of a new AP1100. What should I do? Prior to the $1700 price increase, I was thinking I would get the 1st available Mach2 or AP1100, but the big

Received my Mach2 last Monday, and, believe it or not, it’s been clear here every night since, and it appears that will continue for a couple more nights. I’m very happy with it. I’ve put some images

What are your thoughts? I will 99% of the time just be transporting my ATS Portable Pier with my 1100 GTO to the backyard to set up. I will uninstall if I move it by vehicle. Do you leave yours instal

I having a problem with my new Mach 2 which was just installed yesterday. I'm using the Ethernet connection, APCC and TSX. Initialization and connection to TSX went fine. There are absolutely no obstr