I have a keypad controller I purchased and use with my 1100GTO, (v 4.19.5). Is it possible to also use this with the Mach2 mount and not have to upgrade/downgrade to go back and forth between the moun

I feel like I'm missing an option somewhere. This is a relatively trivial matter but it just bugs me that I must be missing it. Starting up in the evening I start APCC first, then start NINA, which op

My mach2 suddenly developed an issue tonight during imaging. I first noticed that something went wrong because SGPro said the meridian flip failed (I have been imaging for a few months and never had a

Is there an option for different mount profiles in APCC? Currently APCC is configured for my 1100GTO but I have plans to add a Mach2, if possible but not sure how this is handled with license, etc. If

any word on when the Mach2 list will start notifications. Thanks Jim

Greetings! I would like to get a Windows PC-connected GPS device that is accessible by APCC (both Standard and Pro). I have found some inexpensive choices on Amazon as well as more expensive options,

Hi, I find APCC very intuitive - but following is eluding me: I have a permanent set-up at the moment (usually mobile) and installed a large pointing model last night. TheSky is my planetarium. When s

Hi folks: I'm planning on building a custom ONTC telescope and I was wondering what are the Newtonian limits of the 1100 and 1600GTO? I have the 1100 now and I'm on the list for the 1600; I though of

I noticed that this firmware for the Mach2 is available on the website and haven't see any announcement here. I think the history list doesn't mention it. can some one please help me: -date of publica

After several months of APCC telling me that I needed to update the firmware for my Mach1GTO, I decided to do so Friday. Part 1 of the firmware loaded quickly and completely. Unfortunately, when I sta

I installed the updated APCC beta that Ray provided. It installed without issue (Win 10,21H2). I have the MGBoxv2 for GPS and environmental conditions. The latter all work fine as far as feeding to AP

Hi i understand that there might be a Ethernet to RS232 cable adapter. Does anyone use this configuration? I use Ethernet to connect to my CP4GTO and find it very reliable. Cheers

Hello Everyone, I hope this is ok to post here but, (if its not I’m sorry please delete this post) I’m just wondering what software you guys are using to control your AP mounts? I know many are using

I apologize for asking this question which I should know the answer to but here goes. Sometime, not too long ago, some nice person on this thread told me the camera settings I need for a Nikon Mirrorl

As in when did it first version was released to the Astro-physic mount owners. The earliest version I can find on the internet was 2014. I bought a 2009 AP900, CP3GTO which doesn’t even have a USB Jac

Not sure this is the best place for this post, so I apologise in advance; Had a frustrating time using PEMPRO for the very first time on my AP1200 GTO 3 last night. Mount connected to PEMPRO without i

Hi All, Sure would be nice to be able to show my custom meridian limits I created in APCC onto a planetarium program such as Stellarium or Carte Du Ciel. Is that possible or is there another way for m

Hello, I just used my AP900 (CP3 V2) for the first time, controlled by APCC (version 1.9.3) and NINA (version 1.10). The mount performed great, but I had trouble using NINA to sync the coordinates to

Hello all, For those with issues with the Eltima virtual ports, here is a beta version of APCC and the AP V2 ASCOM driver that does not use the Eltima virtual ports. Besides installing the beta versio

Hi all, After a bit of a holiday break, followed by a definitely not-boring time at the day job, I was finally able to return to some coding and have a small (but perhaps big to some) update to my Ast