So I found my mount just about shoving my scope into the pier. - Stopped it , - turned off the mount and the confused controlling software (Nina and Ascom AP V2). - Reposition the mount to park 3 posi

I also am now “dead in the water” because APCC cannot create virtual ports. I am using APCC Pro v. 1.9.3.3, ASCOM 6.6-6.6.0.3444, Windows 10 64 bit with all updates installed. My Mach 2 is sitting in

I have a Mach 2 coming sometime in the next few months from a vendor. Most of my computer experience is with a Mac product. I am also used to using a PC to do charting as an Anesthesiologist in an ope

Hi, Recently I encountered a problem with Mach2. I am using a newly installed Win11, with all apps cleanly installed. The problem only occurs on this Win11 machine. As soon as I switch back to my old

Hi fellow Astronuts, Since being here on Hawaii island these last 2 weeks we have had incredibly beautiful weather with many clear nights. Which has allowed me to do some software/hardware testing of

Hello All - I'm the proud new owner of an AP 1600. As I get started with it, I'm hoping some of the experienced observers and imagers can weigh in on a few questions. Circumstances gave me a once in a

Hi everyone, I finally was able to use my new1100GTO(no encoders) the last few nights. It is setup on a permanent pier in my OBS. I use PHD2 for guiding and did a guiding assistance and it showed a la

Last night I got out with the Mach2 for the first time. Setup was quick and I was off to imaging. These images were 300" unguided with the Tak FC100DZ @ F/5.3 with the ZWO 2600MC. No darks/flats/biase

I use the map feature of SkyX. Rolando

I am running the latest version of APCC Pro. I have a CP3 Box V2 chip. I am trying to use ASTAP, but it does not come with the option of using ASTAP, but I think it should. I actually use it on my obs

Recently, whenever I try to park at position 4, APCC responds with the message "WARNING - DEC Limit was reached! Click here to close ...". I expect this message as I have limits set, but you can't dis

On my new laptop I installed ASCOM 6.6 and the AP driver V2. This machine has Windows 10 with .NET 3.5 activated. When I tried to run Setup Telescope I get these errors: APSetup: Error when trying to

I have a keypad controller I purchased and use with my 1100GTO, (v 4.19.5). Is it possible to also use this with the Mach2 mount and not have to upgrade/downgrade to go back and forth between the moun

I feel like I'm missing an option somewhere. This is a relatively trivial matter but it just bugs me that I must be missing it. Starting up in the evening I start APCC first, then start NINA, which op

My mach2 suddenly developed an issue tonight during imaging. I first noticed that something went wrong because SGPro said the meridian flip failed (I have been imaging for a few months and never had a

Is there an option for different mount profiles in APCC? Currently APCC is configured for my 1100GTO but I have plans to add a Mach2, if possible but not sure how this is handled with license, etc. If

any word on when the Mach2 list will start notifications. Thanks Jim

Greetings! I would like to get a Windows PC-connected GPS device that is accessible by APCC (both Standard and Pro). I have found some inexpensive choices on Amazon as well as more expensive options,

Hi, I find APCC very intuitive - but following is eluding me: I have a permanent set-up at the moment (usually mobile) and installed a large pointing model last night. TheSky is my planetarium. When s

Hi folks: I'm planning on building a custom ONTC telescope and I was wondering what are the Newtonian limits of the 1100 and 1600GTO? I have the 1100 now and I'm on the list for the 1600; I though of