Quick question should the synchronous pulse guide box in ASCOM driver be checked or not checked to minimize the chance of this warning coming up? As this has been happening almost every session. Best

Trying to use Horizons to track Comet C/2022 E3 ZTF. It works great but I am having issues after I try to offset the nucleus from the image center. After I press the “Offset…” button and start trackin

Has anyone on this list successfully used the NINA Orbitals plugin to accurately track C/2022 E3 ZTF? I'm getting very poor results with Orbitals, how ER, when using Horizons through APCC all works as

How does one disable the Synchronous Pulse Guide option in AP V2 Ascom driver. I am getting constant PHD2 errors to this effect after which my tracking goes to hell in a hand basket.

Hi everyone https://www.astrobin.com/full/nzabv3/0/ The fov consists of the small NGC 2579 with the larger HA region Gum 11. This was imaged in broadband with ASI6200 on an SVX80T on the 'ol AP1600ae

Hello All, and a big thanks to all at AP for the great gear and expertise ! I wanted to share my Rosette Nebula as it is my first data with the new 1100 ae. Setup and running with TSX, SGP, and the AP

I finally got a full night with no clouds, so I went back to C/2022 E3. Horizons was really pretty straightforward, especially after watching Ray's video. And imaging unguided really does simplify thi

Recently acquired a Mach1 / CP3 / Eagle Pier and other associated stuff. Trying it all out in garage assuming sometime in the distant future I have a clear night. Is there some trick to getting the AS

Has there ever been, or will there ever be, consideration in developing an alt/az version of the Mach2GTO mount? Perhaps remove the wedge and mount the Mach2GTO proper into an alt/az configuration. Or

Do you own a Mach 2? If so, I am working on some new tutorials and want to hear your experience with setting up the Mach 2 and how you use it. If you don't mind answering a few easy questions can you

Hey guys, I have been running my Mach1GTO in my observatory since 2015. It has the CP3 control box with the "V" chip. It was properly balanced during that initial setup and I have not made any changes

Hello Just checking if anyone has observed something like the above with their mounts. I recently rebalanced my 1600GTO after changing some of the equipment mounted on it. I checked it was well balanc

The new green comet is occluded by my house except I can setup my Mach2 on a tripod due North/North-East. How can I limit APPM from just modeling points in the North or North-East? Shailesh

Hi all, I signed up on the waiting list to purchase a 1100GTO just over a month ago. Not having an Astro-Physics mount before I joined this group and have been thrilled to see so many of you offer so

Does AP have a Polemaster adapter for my Mach2? David C. Finch

I am running my ap900gto through NINA (with ASCOM drivers) and every night after the session is over the mount parks on wrong position even though I set it to park at park 3 position. So when I start

Hi everyone I mentioned our experience with remote imaging wasn't all sunshine and rainbows (we do love it and continue to do it). Several of you requested the follow-up, so I've put together tips and

A little discovery I made this morning was when I remoted into my observatory computer and started APCC (ver. v1-9.6.3) to make changes to the settings, in this case the Status window to not open when

I believe I have noticed that in the latest version of APCC, when I park the mount at the end of a session, the Park radio button remains highlighted, i.e. not grayed out, as it did before. Is this de

How can I use Horizons with SGPro for imaging? Shailesh