PoleMaster Adapter for Mach2
|
Andrew Jones
Does anyone know if this adapter QH-PM-AP900A fits the 1100GTO-AEL? I am currently using the dovetail adapter that Bruce Donzanti showed in his photo. If here was an adapter that fit 1100 without any permanent marks or changes to the mount, then I might consider upgrading.
Thanks for the info. Andrew J Th03/07/21 #76832
|
|
|
|
Jim Crumly
Andrew The PM-AP900 does fit the 1100 I have one on my mount. It screws into the polar alignment hole. There is a picture of a Mach 2 on the AP website that shows it installed on the mach2 of course, but the installation is the same on the 1100.
Clear sky’s Jim
From: main@ap-gto.groups.io <main@ap-gto.groups.io> On Behalf Of Andrew Jones via groups.io
Sent: Monday, January 23, 2023 7:36 AM To: main@ap-gto.groups.io Subject: Re: [ap-gto] PoleMaster Adapter for Mach2
Does anyone know if this adapter QH-PM-AP900A fits the 1100GTO-AEL? I am currently using the dovetail adapter that Bruce Donzanti showed in his photo. If here was an adapter that fit 1100 without any permanent marks or changes to the mount, then I might consider upgrading. Th03/07/21 #76832
|
|
|
|
Pete Mumbower
Here is a picture of the adapter attached to my 1100.
 |
|
|
|
Bill Long
On the 1100AE the read head connection to the motor box will prevent you from installing the Polemaster camera onto the adapter.
From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Jim Crumly <jimwc@...>
Sent: Monday, January 23, 2023 7:11 AM To: main@ap-gto.groups.io <main@ap-gto.groups.io> Subject: Re: [ap-gto] PoleMaster Adapter for Mach2 Andrew The PM-AP900 does fit the 1100 I have one on my mount. It screws into the polar alignment hole. There is a picture of a Mach 2 on the AP website that shows it installed on the mach2 of course, but the installation is the same on the 1100.
Clear sky’s Jim
From: main@ap-gto.groups.io <main@ap-gto.groups.io> On Behalf Of Andrew Jones via groups.io
Does anyone know if this adapter QH-PM-AP900A fits the 1100GTO-AEL? I am currently using the dovetail adapter that Bruce Donzanti showed in his photo. If here was an adapter that fit 1100 without any permanent marks or changes to the mount, then I might consider
upgrading. Th03/07/21 #76832
|
|
|
|
Harley Davidson
Bill
toggle quoted message
Show quoted text
You could do this since it doesn't matter if concentric to the axis: https://www.youtube.com/watch?v=550pZhBKeRw&t=91s tony On 1/23/2023 12:54 PM, Bill Long wrote:
|
|
|
|
Bill Long
I just use SharpCap for PA which works great for me.
From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Harley Davidson <astrocnc@...>
Sent: Monday, January 23, 2023 10:01 AM To: main@ap-gto.groups.io <main@ap-gto.groups.io> Subject: Re: [ap-gto] PoleMaster Adapter for Mach2 Bill
You could do this since it doesn't matter if concentric to the axis: https://www.youtube.com/watch?v=550pZhBKeRw&t=91s tony On 1/23/2023 12:54 PM, Bill Long wrote:
|
|
|
|
Jim Crumly
Andrew For clarification. I have also used the dovetail adapter that Bruce Donzanti showed in his photo, but on a different mount. It worked well. Sorry I didn’t notice the -AEL. My 1100 does not have encoders.
Clear Sky’s Jim
From: main@ap-gto.groups.io <main@ap-gto.groups.io> On Behalf Of Andrew Jones via groups.io
Sent: Monday, January 23, 2023 7:36 AM To: main@ap-gto.groups.io Subject: Re: [ap-gto] PoleMaster Adapter for Mach2
Does anyone know if this adapter QH-PM-AP900A fits the 1100GTO-AEL? I am currently using the dovetail adapter that Bruce Donzanti showed in his photo. If here was an adapter that fit 1100 without any permanent marks or changes to the mount, then I might consider upgrading. Th03/07/21 #76832
|
|
|
|
Terri Zittritsch
I have the 1100 AEL and you can install and use the pole master by unplugging the encoder for the DEC motor box while the camera is attached. The mount doesn’t need powering up to use the Polemaster. The pole master adapter can stay in the mount when you replace the encoder plug after polar aligning is complete so that the only thing you need to do to align, is unplug, place the polemaster in it’s adapter, and do the align, remove the pole master and recap the adapter and put your encoder plug back in and power up. It does make you do the rotational adjustment each time but that only adds about 2 minutes at most. You can either loosen clutches or (Roland please stop reading) disconnect the worm) to get your 60 degrees of rotation. With modeling you can see exactly how close you get… well inside of 30” for azimuth.
Terri |
|
|
|
Roland Christen
(Roland please stop reading) disconnect the worm) Hahaha
 Rolando
-----Original Message-----
From: Terri Zittritsch <theresamarie11@...> To: main@ap-gto.groups.io Sent: Tue, Jan 24, 2023 8:53 am Subject: Re: [ap-gto] PoleMaster Adapter for Mach2 I have the 1100 AEL and you can install and use the pole master by unplugging the encoder for the DEC motor box while the camera is attached. The mount doesn’t need powering up to use the Polemaster. The pole master adapter can stay in the mount when you replace the encoder plug after polar aligning is complete so that the only thing you need to do to align, is unplug, place the polemaster in it’s adapter, and do the align, remove the pole master and recap the adapter and put your encoder plug back in and power up. It does make you do the rotational adjustment each time but that only adds about 2 minutes at most. You can either loosen clutches or (Roland please stop reading) disconnect the worm) to get your 60 degrees of rotation. With modeling you can see exactly how close you get… well inside of 30” for azimuth.
Terri -- Roland Christen Astro-Physics |
|
|