Date
1 - 4 of 4
mach 2 guider settings in Skyx camera add on
Andrea Lucchetti
Hello,
I wonder if someone can share a good set up for guiding the Mach 2 with Skyx camera addon. Maxim or other software as alternatives. currently I have: -minimum move: 0.051 sec -max move: 0.199 sec -aggressiveness: 8 -method: pulse guide -delay after correction:0 -simultaneous corrections: yes thank you very much, Andrea
|
|
Roland Christen
You can reduce the Min Move to .03 or even .02 unless you have very poor seeing. I have used .01 in excellent seeing. What is your guide exposure? I use 5 seconds most nights, no need to go faster. I use these same settings in MaximDL.
Rolando
-----Original Message-----
From: Andrea Lucchetti <andlucchett@...> To: main@ap-gto.groups.io Sent: Tue, Dec 15, 2020 4:32 pm Subject: [ap-gto] mach 2 guider settings in Skyx camera add on Hello,
I wonder if someone can share a good set up for guiding the Mach 2 with Skyx camera addon. Maxim or other software as alternatives. currently I have: -minimum move: 0.051 sec -max move: 0.199 sec -aggressiveness: 8 -method: pulse guide -delay after correction:0 -simultaneous corrections: yes thank you very much, Andrea -- Roland Christen Astro-Physics
|
|
Andrea Lucchetti
hi Roland,
my exposure is set from 3 to 5s. Guide speed 1x, right? I will try 0.03 next time, thanks a lot! Andrea
|
|
Roland Christen
Yes, guide speed always at 1x.
Roland
-----Original Message-----
From: Andrea Lucchetti <andlucchett@...> To: main@ap-gto.groups.io Sent: Wed, Dec 16, 2020 3:28 pm Subject: Re: [ap-gto] mach 2 guider settings in Skyx camera add on hi Roland,
my exposure is set from 3 to 5s. Guide speed 1x, right? I will try 0.03 next time, thanks a lot! Andrea -- Roland Christen Astro-Physics
|
|