Adding Primaluce Labs ECCO2 for Environmental sensor?


Wayne Hixson
 

Ray, any chance we could add the ECCO 2 as environmental sensor for modeling? The MgBoxV2 I have is unreliable. 


wayne 


Bill Long
 


Does it have an ASCOM Observing Conditions driver?



From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Wayne Hixson via groups.io <wayneh9026@...>
Sent: Sunday, March 28, 2021 11:56 AM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: [ap-gto] Adding Primaluce Labs ECCO2 for Environmental sensor?
 

Ray, any chance we could add the ECCO 2 as environmental sensor for modeling? The MgBoxV2 I have is unreliable. 


wayne 


Wayne Hixson
 

It does have an ASCOM driver, reads temperature, pressure and humidity. Not sure if that qualifies? I’ll check with Primaluce.


Bill Long
 

If it has an Observing Conditions driver you can install that and configure APCC to use it.


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Wayne Hixson via groups.io <wayneh9026@...>
Sent: Sunday, March 28, 2021 1:06 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] Adding Primaluce Labs ECCO2 for Environmental sensor?
 
It does have an ASCOM driver, reads temperature, pressure and humidity. Not sure if that qualifies? I’ll check with Primaluce.


Wayne Hixson
 

Thanks! I don’t have it yet, I’ll see if anyone else can report first-hand knowledge. 

Wayne


On Mar 28, 2021, at 1:09 PM, Bill Long <bill@...> wrote:


If it has an Observing Conditions driver you can install that and configure APCC to use it.


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Wayne Hixson via groups.io <wayneh9026@...>
Sent: Sunday, March 28, 2021 1:06 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] Adding Primaluce Labs ECCO2 for Environmental sensor?
 
It does have an ASCOM driver, reads temperature, pressure and humidity. Not sure if that qualifies? I’ll check with Primaluce.


Bill Long
 

Their website says the device has ASCOM drivers so I assume it does.


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Wayne Hixson via groups.io <wayneh9026@...>
Sent: Sunday, March 28, 2021 1:11 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] Adding Primaluce Labs ECCO2 for Environmental sensor?
 
Thanks! I don’t have it yet, I’ll see if anyone else can report first-hand knowledge. 

Wayne


On Mar 28, 2021, at 1:09 PM, Bill Long <bill@...> wrote:


If it has an Observing Conditions driver you can install that and configure APCC to use it.


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Wayne Hixson via groups.io <wayneh9026@...>
Sent: Sunday, March 28, 2021 1:06 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] Adding Primaluce Labs ECCO2 for Environmental sensor?
 
It does have an ASCOM driver, reads temperature, pressure and humidity. Not sure if that qualifies? I’ll check with Primaluce.


annaski
 

If anyone has this working reliably with APPM please post, as I am also looking at this.


Wayne Hixson
 

Fillipo at Primaluce says the ASCOM driver is an Observing Conditions driver. I ordered one, I’ll post when I get it

Wayne


On Mar 29, 2021, at 2:38 PM, annaski <annaski@...> wrote:

If anyone has this working reliably with APPM please post, as I am also looking at this.


Wayne Hixson
 

Well I’ve got it but don’t know how to configure APCC to use it. The only place I see to connect it is in the GPS tab and it’s not a GPS device. Maybe I’m missing something. 


Bill Long
 

Environmental settings from the top menu.


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Wayne Hixson via groups.io <wayneh9026@...>
Sent: Wednesday, March 31, 2021 12:08 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] Adding Primaluce Labs ECCO2 for Environmental sensor?
 
Well I’ve got it but don’t know how to configure APCC to use it. The only place I see to connect it is in the GPS tab and it’s not a GPS device. Maybe I’m missing something. 


Wayne Hixson
 

Got it and it works! 😀


On Mar 31, 2021, at 12:14 PM, Bill Long <bill@...> wrote:


Environmental settings from the top menu.


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Wayne Hixson via groups.io <wayneh9026@...>
Sent: Wednesday, March 31, 2021 12:08 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] Adding Primaluce Labs ECCO2 for Environmental sensor?
 
Well I’ve got it but don’t know how to configure APCC to use it. The only place I see to connect it is in the GPS tab and it’s not a GPS device. Maybe I’m missing something.