Date
1 - 6 of 6
Flashing light from usb to serial adapter
|
Drill it out. LOL "Always take the high road. There's less traffic." Observatory Engineer Summit Kinetics Waikoloa, Hawaii
On Tue, May 31, 2022 at 10:41 AM Jeffc <jeffcrilly@...> wrote:
|
|
|
|
Jeffc
I used this once for a different application (insulating a tiny wire repair). Kinda like paint, but intended for electrical stuff. Fwiw.. I would probably use Gaffers tape. It is opaque, but over time will dry out, and possibly flake off. In one case I used blue painters tape to protect the part, and then gaffers tape on top of the blue painters tape. If I need to remove the "cover", the painters tape comes off easily.
On Sun, May 29, 2022 at 7:33 PM Mike Dodd <mike@...> wrote: On 5/29/2022 10:24 PM, Yves Laroche wrote:
|
|
|
|
On 5/29/2022 10:24 PM, Yves Laroche wrote:
Electrical tape will do the job.I Prefer black paint. Electrical tape will get gummy over time, and fall off or make a mess. --- Mike
|
|
|
|
Yves Laroche
Hi Geoff, Electrical tape will do the job. Regards, Yves
Le 29 mai 2022 21 h 32, Geoff Smith <ghsmith45@...> a écrit : I have the FTDI USB-to_serial adapter recommended by Astro-Physics. It flashes continuously when imaging--very annoying. Does anybody have a good method of dealing with this? Paint, tape or even (you never know) a software solution?
|
|
|
|
Yves Laroche
Electrical tape will do the job. Regards, Yved
Le 29 mai 2022 21 h 32, Geoff Smith <ghsmith45@...> a écrit : I have the FTDI USB-to_serial adapter recommended by Astro-Physics. It flashes continuously when imaging--very annoying. Does anybody have a good method of dealing with this? Paint, tape or even (you never know) a software solution?
|
|
|
|
Geoff Smith
I have the FTDI USB-to_serial adapter recommended by Astro-Physics. It flashes continuously when imaging--very annoying. Does anybody have a good method of dealing with this? Paint, tape or even (you never know) a software solution?
Geoff
|
|
|