Mach2 : Motor Stall detected #APCC #Mach2GTO


Hi Mike,

I use APCC Beta Version from Ray v1.9.1.3 concerning Firmware : VCP5-P02-10 
Best Regard,


Mike Hanson

Hi Alain,

The most common cause for a stall while slewing the Mach 2 is having the clutches a little loose.  A little imbalance could also contribute if the clutches are loose.  If the clutches are nice and tight, and the system balanced, please contact me privately.

Do you have APCC?  A keypad?  Do you know what version of firmware you are running?


Hi all,

Still in my learning phase using Ascom driver, when i use goto, the mount stops with error message ; Fault Triggered: MotorStall 

Any ideas ? 


Alain Prette