Date
1 - 3 of 3
Mach2/APCC Pro communication and low power errors during imaging run
|
Luca Marinelli
I was imaging unattended last night and this morning I found the mount stopped (not parked) in Park 3 position with many communication and low-power errors in the APCC console, which stopped the imaging run. The SGP log showed errors communicating with the AP ASCOM driver. The 24V power brick works and when I parked, unparked, and slewed the mount from both APCC and the keypad, everything worked. I am stumped as to what might have gone wrong during the night.
Ray, I have zipped the log files and parked them here: https://www.dropbox.com/s/86upw9pw2igmxdx/ApccZip-Luca_Marinelli-2021-06-29-071128.zip?dl=0 I would appreciate if you could take a look and see if anything jumps out at you. thanks! Luca
|
|
|
|
Roland Christen
Please call George at AP and talk to him about this. He may have the solution for you.
Rolando
-----Original Message-----
From: Luca Marinelli <photo@...> To: main@ap-gto.groups.io Sent: Tue, Jun 29, 2021 8:10 am Subject: [ap-gto] Mach2/APCC Pro communication and low power errors during imaging run I was imaging unattended last night and this morning I found the mount stopped (not parked) in Park 3 position with many communication and low-power errors in the APCC console, which stopped the imaging run. The SGP log showed errors communicating with the AP ASCOM driver. The 24V power brick works and when I parked, unparked, and slewed the mount from both APCC and the keypad, everything worked. I am stumped as to what might have gone wrong during the night.
Ray, I have zipped the log files and parked them here: https://www.dropbox.com/s/86upw9pw2igmxdx/ApccZip-Luca_Marinelli-2021-06-29-071128.zip?dl=0 I would appreciate if you could take a look and see if anything jumps out at you. thanks! Luca -- Roland Christen Astro-Physics
|
|
|
|
Luca Marinelli
Thanks Roland, will do.
Luca
On Jun 29, 2021, at 10:32 AM, Roland Christen via groups.io <chris1011@...> wrote:
|
|
|