3D View error #APCC


 
Edited

The laptop is at the scope, controlling it, and I'm accessing it from my indoor desktop.

P.S. Thanks to Ray for suggesting the possible cause of the error.


 

Jerome is your laptop the one at the scope or the one accessing the scope computer via Remote Desktop?



On Wed, May 18, 2022 at 12:41 PM Jerome Allison <jallison@...> wrote:
I recently had basically the same problem.  I was using Remote Desktop to control my imaging laptop.  The 3D view in APCC would produce the error and clicking "OK" would close APCC down.  I got different messages, but for example the most common one was "Load Library failed with error 126: The specified module could not be found."  I wish the O.P. had posted their solution, but I did find a workaround.

My laptop CPU has built-in AMD Radeon graphics, as well as an nVidia GeForce GTX 1660 Ti graphics set.  Disabling the nVidia video in Device Manager cured the problem.  So now the choice is either disable that (and remember to re-enable later) or not use the 3D view when in APCC over Remote Desktop.

Jerome




 

I recently had basically the same problem.  I was using Remote Desktop to control my imaging laptop.  The 3D view in APCC would produce the error and clicking "OK" would close APCC down.  I got different messages, but for example the most common one was "Load Library failed with error 126: The specified module could not be found."  I wish the O.P. had posted their solution, but I did find a workaround.

My laptop CPU has built-in AMD Radeon graphics, as well as an nVidia GeForce GTX 1660 Ti graphics set.  Disabling the nVidia video in Device Manager cured the problem.  So now the choice is either disable that (and remember to re-enable later) or not use the 3D view when in APCC over Remote Desktop.

Jerome


davidcfinch9
 

Thank you for pointing me in the right direction. I had to change the graphics setting and now things are working well.
Regards,
David

-----Original Message-----
From: main@ap-gto.groups.io <main@ap-gto.groups.io> On Behalf Of Ray Gralak
Sent: Monday, December 7, 2020 6:12 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] 3D View error #APCC

Hi David,

When I click on the 3D View button I get a pop-up that states, "Load
Library failed with error 1114. A dynamic link library (DLL) initiation routine failed." When I click the OK box, APCC shuts down.
That is a pretty unusual error that probably has nothing to do with APCC specifically, but something needed to present 3D graphics. It might be something related to your graphics card driver, for instance.

Are you directly on the computer, or remoting into it? If you are remoting into the computer, you might try using it directly to see if the issue goes away. If not, you might want to try a web search for your computer model and error 1114. There may be a graphics driver update available.

-Ray Gralak
Author of PEMPro
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf
Of davidcfinch9 via groups.io
Sent: Monday, December 7, 2020 8:43 AM
To: main@ap-gto.groups.io
Subject: [ap-gto] 3D View error #APCC

Everything is working very well with my new Mach2GTO and APCC Pro except for the 3D View feature.
When I click on the 3D View button I get a pop-up that states, "Load
Library failed with error 1114. A dynamic link library (DLL) initiation routine failed." When I click the OK box, APCC shuts down.
How can I fix this?
Regards,
David


Ray Gralak
 

Hi David,

When I click on the 3D View button I get a pop-up that states, "Load Library failed with error 1114. A dynamic link
library (DLL) initiation routine failed." When I click the OK box, APCC shuts down.
That is a pretty unusual error that probably has nothing to do with APCC specifically, but something needed to present 3D graphics. It might be something related to your graphics card driver, for instance.

Are you directly on the computer, or remoting into it? If you are remoting into the computer, you might try using it directly to see if the issue goes away. If not, you might want to try a web search for your computer model and error 1114. There may be a graphics driver update available.

-Ray Gralak
Author of PEMPro
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of davidcfinch9 via groups.io
Sent: Monday, December 7, 2020 8:43 AM
To: main@ap-gto.groups.io
Subject: [ap-gto] 3D View error #APCC

Everything is working very well with my new Mach2GTO and APCC Pro except for the 3D View feature.
When I click on the 3D View button I get a pop-up that states, "Load Library failed with error 1114. A dynamic link
library (DLL) initiation routine failed." When I click the OK box, APCC shuts down.
How can I fix this?
Regards,
David


davidcfinch9
 

Everything is working very well with my new Mach2GTO and APCC Pro except for the 3D View feature.
When I click on the 3D View button I get a pop-up that states, "Load Library failed with error 1114. A dynamic link library (DLL) initiation routine failed." When I click the OK box, APCC shuts down.
How can I fix this?
Regards,
David