1. Ap-Gto | Main
  2. Topics

APCC Comm Event

John Stiner
 

Ray, I apologize for the interruption but my “Comm Events” indicator has gone pink. When I open it, it reflects that every 3 seconds an error repeats that says “Sent: ‘:m#, Error: The operation has timed out.” I can send logs if needed after tonight’s run but APCC Pro appears operational and tracking is fine. Any thoughts on what mistake I’ve likely made?
Ray Gralak
 

Hi John,

What is the exact version of apcc that you are using?

The latest versions are 1.8.8.0 (standard) and 1.8.8.3 (pro).

-Ray Gralak
Author of PEMPro
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of John Stiner
Sent: Tuesday, November 10, 2020 5:20 PM
To: main@ap-gto.groups.io
Subject: [ap-gto] APCC Comm Event

Ray, I apologize for the interruption but my “Comm Events” indicator has gone pink. When I open it, it reflects
that every 3 seconds an error repeats that says “Sent: ‘:m#, Error: The operation has timed out.” I can send logs
if needed after tonight’s run but APCC Pro appears operational and tracking is fine. Any thoughts on what
mistake I’ve likely made?
John Stiner
 

I am using APCC Pro 1.8.5.1 (8/23/20). 
Ray Gralak
 

Updating to the latest version will fix the issue.

-Ray Gralak
Author of PEMPro
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of John Stiner
Sent: Tuesday, November 10, 2020 6:03 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] APCC Comm Event

I am using APCC Pro 1.8.5.1 (8/23/20).
John Stiner
 

Thanks Ray. I’ll update to the latest version. 

1 - 5 of 5