Hi Peter,

The mount suddenly stopped working. I power cycled, reloaded APCC,
light turns yellow with connect.

I looked at your logs, but I only found one fault, a low power fault.

The usual reasons for a yellow light are:

1. Low power
2. Motor stall
3. Servo fault

If it happens again, keep a note of the time when you first noticed it. The logs can easily span hundreds of megabytes, so it's helpful to have an accurate time to start looking for an issue.

-Ray Gralak
Author of PEMPro
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Peter Bresler via groups.io
Sent: Saturday, October 17, 2020 11:57 PM
To: main@ap-gto.groups.io
Subject: [ap-gto] Yellow light with mount connect

The mount suddenly stopped working. I power cycled, reloaded APCC, light turns yellow with connect.


https://www.dropbox.com/s/jzffvbbyw6smy0s/ApccZip-Peter_Bresler-2020-10-17-234703.zip?dl=0