Topics

APCC Standard v1.8.2.0 and APCC Pro v1.8.2.1


Ray Gralak
 

Hello All,

I am announcing the availability of APCC Standard 1.8.2.0 and APCC Pro 1.8.2.1 (links below).

Most of the changes are bug fixes and are itemized here:

APCC - BUG Fix - Tracking rates were not working correctly for the GTOCP3 in 1.8.1.1.

APCC - BUG FIX - Prevent Mach 2 from setting HOME to be anything other than Park 3.

APCC - BUG FIX - The ASCOM driver can send values in exponential notation when the value is near zero. APCC was rejecting this exponential notation.

APCC - BUG Fix - Commands starting with "G_" were rejected.

APCC - BUG Fix - Clear flashing scope view when user clears all errors.

APCC - BUG FIX - Settings were not always being correctly saved.

APCC - BUG Fix - Prevent possible overflow in Meridian Limits Add Point dialog.

APCC - BUG FIX - Horizons - some of the menus did nothing.

APCC - BUG FIX - Horizons - Fixed a number of display bugs and made the displayed data more useful.

APCC - BUG Fix - fixed an integer overflow error that would happen occasionally.

APCC Pro - BUG FIX - APPM - Slew would sometimes fail to appear to complete thus stalling data mapping runs.

APCC Pro - BUG Fix - tracking rate correction was not always saved correctly.

APCC - Improvement - Moved virtual port handlers to their own threads to reduce latency when user interface elements are updated.

APCC - Improvement - In the Meridian Tracking Limits Explorer dialog window, add a button to update Meridian Inclination.

APCC Standard 1.8.2.0:
http://www.apastrosoftware.com/apcc_download/APCC_Standard_Setup_1.8.2.0.exe

APCC Pro 1.8.2.1:
http://www.apastrosoftware.com/apcc_download/APCC_Pro_Setup_1.8.2.1.exe

APCC Standard PDF:
http://www.apastrosoftware.com/apcc_download/apcc-std.pdf

APCC Pro PDF:
http://www.apastrosoftware.com/apcc_download/apcc-pro.pdf

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


Bill Long
 

Thanks Ray. I dont usually have this problem, but APCC Pro cannot see that an update is available.


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Ray Gralak <groups3@...>
Sent: Monday, May 25, 2020 4:17 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: [ap-gto] APCC Standard v1.8.2.0 and APCC Pro v1.8.2.1
 
Hello All,

I am announcing the availability of APCC Standard 1.8.2.0 and APCC Pro 1.8.2.1 (links below).

Most of the changes are bug fixes and are itemized here:

APCC - BUG Fix - Tracking rates were not working correctly for the GTOCP3 in 1.8.1.1.

APCC - BUG FIX - Prevent Mach 2 from setting HOME to be anything other than Park 3.

APCC - BUG FIX - The ASCOM driver can send values in exponential notation when the value is near zero. APCC was rejecting this exponential notation.

APCC - BUG Fix - Commands starting with "G_" were rejected.

APCC - BUG Fix - Clear flashing scope view when user clears all errors.

APCC - BUG FIX - Settings were not always being correctly saved.

APCC - BUG Fix - Prevent possible overflow in Meridian Limits Add Point dialog.

APCC - BUG FIX - Horizons - some of the menus did nothing.

APCC - BUG FIX - Horizons - Fixed a number of display bugs and made the displayed data more useful.

APCC - BUG Fix - fixed an integer overflow error that would happen occasionally.

APCC Pro - BUG FIX - APPM - Slew would sometimes fail to appear to complete thus stalling data mapping runs.

APCC Pro - BUG Fix - tracking rate correction was not always saved correctly.

APCC - Improvement - Moved virtual port handlers to their own threads to reduce latency when user interface elements are updated.

APCC - Improvement - In the Meridian Tracking Limits Explorer dialog window, add a button to update Meridian Inclination.

APCC Standard 1.8.2.0:
https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.apastrosoftware.com%2Fapcc_download%2FAPCC_Standard_Setup_1.8.2.0.exe&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=iRQL4PSfuk5q6ObBb7VLFU4H7Nuap3q3Q5xQjGhqzig%3D&amp;reserved=0

APCC Pro 1.8.2.1:
https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.apastrosoftware.com%2Fapcc_download%2FAPCC_Pro_Setup_1.8.2.1.exe&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=ZFZA40sAdwLl0P3IIh2MduVrjLQeX%2F2%2FHeSEpFg7KyA%3D&amp;reserved=0

APCC Standard PDF:
https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.apastrosoftware.com%2Fapcc_download%2Fapcc-std.pdf&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=YF3Oh6Ce%2Fh%2BwCQEe%2FUPZTKBhSgqjuwlXCg6u9yMLOgM%3D&amp;reserved=0

APCC Pro PDF:
https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.apastrosoftware.com%2Fapcc_download%2Fapcc-pro.pdf&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=tFNKJyAPRawNeKLpibPWGR5EyCzJTaFYgG0VDkpEhNM%3D&amp;reserved=0

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-pro&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=F6gvmHzFDNP%2BJAD%2B8jExUIswhl7kgBzojcSM5WNKNIg%3D&amp;reserved=0
Author of PEMPro V3:  https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=58JmvmgtI3AsOGZrHjVqlbPyCxtFOIJJuIIApGt4EvY%3D&amp;reserved=0
Author of Astro-Physics V2 ASCOM Driver: https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637260454274952514&amp;sdata=UWVzbzixhnJx7qAJrgP81PLJBLkl6dE%2B1oN4YO99uyE%3D&amp;reserved=0





Yves Laroche
 

Ray,

the same behaviour for me.

Regards,
Yves



Le 25/05/20 20:41, Bill Long <bill@...> a écrit :

Thanks Ray. I dont usually have this problem, but APCC Pro cannot see that an update is available.



From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Ray Gralak <groups3@...>
Sent: Monday, May 25, 2020 4:17 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: [ap-gto] APCC Standard v1.8.2.0 and APCC Pro v1.8.2.1

Hello All,

I am announcing the availability of APCC Standard 1.8.2.0 and APCC Pro 1.8.2.1 (links below).

Most of the changes are bug fixes and are itemized here:

APCC - BUG Fix - Tracking rates were not working correctly for the GTOCP3 in 1.8.1.1.

APCC - BUG FIX - Prevent Mach 2 from setting HOME to be anything other than Park 3.

APCC - BUG FIX - The ASCOM driver can send values in exponential notation when the value is near zero. APCC was rejecting this exponential notation.

APCC - BUG Fix - Commands starting with "G_" were rejected.

APCC - BUG Fix - Clear flashing scope view when user clears all errors.

APCC - BUG FIX - Settings were not always being correctly saved.

APCC - BUG Fix - Prevent possible overflow in Meridian Limits Add Point dialog.

APCC - BUG FIX - Horizons - some of the menus did nothing.

APCC - BUG FIX - Horizons - Fixed a number of display bugs and made the displayed data more useful.

APCC - BUG Fix - fixed an integer overflow error that would happen occasionally.

APCC Pro - BUG FIX - APPM - Slew would sometimes fail to appear to complete thus stalling data mapping runs.

APCC Pro - BUG Fix - tracking rate correction was not always saved correctly.

APCC - Improvement - Moved virtual port handlers to their own threads to reduce latency when user interface elements are updated.

APCC - Improvement - In the Meridian Tracking Limits Explorer dialog window, add a button to update Meridian Inclination.

APCC Standard 1.8.2.0:
https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.apastrosoftware.com%2Fapcc_download%2FAPCC_Standard_Setup_1.8.2.0.exe&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=iRQL4PSfuk5q6ObBb7VLFU4H7Nuap3q3Q5xQjGhqzig%3D&amp;reserved=0

APCC Pro 1.8.2.1:
https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.apastrosoftware.com%2Fapcc_download%2FAPCC_Pro_Setup_1.8.2.1.exe&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=ZFZA40sAdwLl0P3IIh2MduVrjLQeX%2F2%2FHeSEpFg7KyA%3D&amp;reserved=0

APCC Standard PDF:
https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.apastrosoftware.com%2Fapcc_download%2Fapcc-std.pdf&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=YF3Oh6Ce%2Fh%2BwCQEe%2FUPZTKBhSgqjuwlXCg6u9yMLOgM%3D&amp;reserved=0

APCC Pro PDF:
https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.apastrosoftware.com%2Fapcc_download%2Fapcc-pro.pdf&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=tFNKJyAPRawNeKLpibPWGR5EyCzJTaFYgG0VDkpEhNM%3D&amp;reserved=0

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-pro&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=F6gvmHzFDNP%2BJAD%2B8jExUIswhl7kgBzojcSM5WNKNIg%3D&amp;reserved=0
Author of PEMPro V3:  https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=58JmvmgtI3AsOGZrHjVqlbPyCxtFOIJJuIIApGt4EvY%3D&amp;reserved=0
Author of Astro-Physics V2 ASCOM Driver: https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637260454274952514&amp;sdata=UWVzbzixhnJx7qAJrgP81PLJBLkl6dE%2B1oN4YO99uyE%3D&amp;reserved=0





Ray Gralak
 

Thanks Ray. I dont usually have this problem, but APCC Pro cannot see that an update is available.
The download links are in the post.

Some people wanted direct download links and an announcement when the updates are available. This is that!

I'll update the download link in a few days.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Bill Long
Sent: Monday, May 25, 2020 5:41 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] APCC Standard v1.8.2.0 and APCC Pro v1.8.2.1

Thanks Ray. I dont usually have this problem, but APCC Pro cannot see that an update is available.

________________________________

From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Ray Gralak <groups3@gralak.com>
Sent: Monday, May 25, 2020 4:17 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: [ap-gto] APCC Standard v1.8.2.0 and APCC Pro v1.8.2.1

Hello All,

I am announcing the availability of APCC Standard 1.8.2.0 and APCC Pro 1.8.2.1 (links below).

Most of the changes are bug fixes and are itemized here:

APCC - BUG Fix - Tracking rates were not working correctly for the GTOCP3 in 1.8.1.1.

APCC - BUG FIX - Prevent Mach 2 from setting HOME to be anything other than Park 3.

APCC - BUG FIX - The ASCOM driver can send values in exponential notation when the value is near zero.
APCC was rejecting this exponential notation.

APCC - BUG Fix - Commands starting with "G_" were rejected.

APCC - BUG Fix - Clear flashing scope view when user clears all errors.

APCC - BUG FIX - Settings were not always being correctly saved.

APCC - BUG Fix - Prevent possible overflow in Meridian Limits Add Point dialog.

APCC - BUG FIX - Horizons - some of the menus did nothing.

APCC - BUG FIX - Horizons - Fixed a number of display bugs and made the displayed data more useful.

APCC - BUG Fix - fixed an integer overflow error that would happen occasionally.

APCC Pro - BUG FIX - APPM - Slew would sometimes fail to appear to complete thus stalling data mapping
runs.

APCC Pro - BUG Fix - tracking rate correction was not always saved correctly.

APCC - Improvement - Moved virtual port handlers to their own threads to reduce latency when user interface
elements are updated.

APCC - Improvement - In the Meridian Tracking Limits Explorer dialog window, add a button to update Meridian
Inclination.

APCC Standard 1.8.2.0:
https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.apastrosoftware.com%2Fapcc_dow
nload%2FAPCC_Standard_Setup_1.8.2.0.exe&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d801
01be39%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=iRQL4P
Sfuk5q6ObBb7VLFU4H7Nuap3q3Q5xQjGhqzig%3D&amp;reserved=0

APCC Pro 1.8.2.1:
https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.apastrosoftware.com%2Fapcc_dow
nload%2FAPCC_Pro_Setup_1.8.2.1.exe&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be3
9%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=ZFZA40sAdw
Ll0P3IIh2MduVrjLQeX%2F2%2FHeSEpFg7KyA%3D&amp;reserved=0

APCC Standard PDF:
https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.apastrosoftware.com%2Fapcc_dow
nload%2Fapcc-
std.pdf&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaa
aaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=YF3Oh6Ce%2Fh%2BwCQEe%2FUPZTKBhSgqj
uwlXCg6u9yMLOgM%3D&amp;reserved=0

APCC Pro PDF:
https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.apastrosoftware.com%2Fapcc_dow
nload%2Fapcc-
pro.pdf&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaa
aaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=tFNKJyAPRawNeKLpibPWGR5EyCzJTaFYgG0
VDkpEhNM%3D&amp;reserved=0

-Ray Gralak
Author of APCC (Astro-Physics Command Center):
https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-
pro&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaa
aaaaa%7C1%7C0%7C637260454274942528&amp;sdata=F6gvmHzFDNP%2BJAD%2B8jExUIswhl7kgBzojcS
M5WNKNIg%3D&amp;reserved=0
<https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-
pro&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaa
aaaaa%7C1%7C0%7C637260454274942528&amp;sdata=F6gvmHzFDNP%2BJAD%2B8jExUIswhl7kgBzojcS
M5WNKNIg%3D&amp;reserved=0>
Author of PEMPro V3:
https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&;amp;data=02%
7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
%7C637260454274942528&amp;sdata=58JmvmgtI3AsOGZrHjVqlbPyCxtFOIJJuIIApGt4EvY%3D&amp;reserv
ed=0
<https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&;amp;data=02
%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C
0%7C637260454274942528&amp;sdata=58JmvmgtI3AsOGZrHjVqlbPyCxtFOIJJuIIApGt4EvY%3D&amp;reser
ved=0>
Author of Astro-Physics V2 ASCOM Driver:
https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&;a
mp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaaa
a%7C1%7C0%7C637260454274952514&amp;sdata=UWVzbzixhnJx7qAJrgP81PLJBLkl6dE%2B1oN4YO99uy
E%3D&amp;reserved=0
<https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&;
amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaa
aa%7C1%7C0%7C637260454274952514&amp;sdata=UWVzbzixhnJx7qAJrgP81PLJBLkl6dE%2B1oN4YO99u
yE%3D&amp;reserved=0>






Cheng-Yang Tan
 

Hi Ray,
   Thanks for the announcement and links. I'm one those people :)

cytan

On Monday, May 25, 2020, 08:35:54 PM CDT, Ray Gralak <groups3@...> wrote:


> Thanks Ray. I dont usually have this problem, but APCC Pro cannot see that an update is available.

The download links are in the post.

Some people wanted direct download links and an announcement when the updates are available. This is that!

I'll update the download link in a few days.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3:  https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

> -----Original Message-----
> From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Bill Long
> Sent: Monday, May 25, 2020 5:41 PM
> To: main@ap-gto.groups.io
> Subject: Re: [ap-gto] APCC Standard v1.8.2.0 and APCC Pro v1.8.2.1
>
> Thanks Ray. I dont usually have this problem, but APCC Pro cannot see that an update is available.
>
> ________________________________
>
> From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Ray Gralak <groups3@...>
> Sent: Monday, May 25, 2020 4:17 PM
> To: main@ap-gto.groups.io <main@ap-gto.groups.io>
> Subject: [ap-gto] APCC Standard v1.8.2.0 and APCC Pro v1.8.2.1
>
> Hello All,
>
> I am announcing the availability of APCC Standard 1.8.2.0 and APCC Pro 1.8.2.1 (links below).
>
> Most of the changes are bug fixes and are itemized here:
>
> APCC - BUG Fix - Tracking rates were not working correctly for the GTOCP3 in 1.8.1.1.
>
> APCC - BUG FIX - Prevent Mach 2 from setting HOME to be anything other than Park 3.
>
> APCC - BUG FIX - The ASCOM driver can send values in exponential notation when the value is near zero.
> APCC was rejecting this exponential notation.
>
> APCC - BUG Fix - Commands starting with "G_" were rejected.
>
> APCC - BUG Fix - Clear flashing scope view when user clears all errors.
>
> APCC - BUG FIX - Settings were not always being correctly saved.
>
> APCC - BUG Fix - Prevent possible overflow in Meridian Limits Add Point dialog.
>
> APCC - BUG FIX - Horizons - some of the menus did nothing.
>
> APCC - BUG FIX - Horizons - Fixed a number of display bugs and made the displayed data more useful.
>
> APCC - BUG Fix - fixed an integer overflow error that would happen occasionally.
>
> APCC Pro - BUG FIX - APPM - Slew would sometimes fail to appear to complete thus stalling data mapping
> runs.
>
> APCC Pro - BUG Fix - tracking rate correction was not always saved correctly.
>
> APCC - Improvement - Moved virtual port handlers to their own threads to reduce latency when user interface
> elements are updated.
>
> APCC - Improvement - In the Meridian Tracking Limits Explorer dialog window, add a button to update Meridian
> Inclination.
>
> APCC Standard 1.8.2.0:
> https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.apastrosoftware.com%2Fapcc_dow
> nload%2FAPCC_Standard_Setup_1.8.2.0.exe&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d801
> 01be39%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=iRQL4P
> Sfuk5q6ObBb7VLFU4H7Nuap3q3Q5xQjGhqzig%3D&amp;reserved=0
>
> APCC Pro 1.8.2.1:
> https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.apastrosoftware.com%2Fapcc_dow
> nload%2FAPCC_Pro_Setup_1.8.2.1.exe&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be3
> 9%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=ZFZA40sAdw
> Ll0P3IIh2MduVrjLQeX%2F2%2FHeSEpFg7KyA%3D&amp;reserved=0
>
> APCC Standard PDF:
> https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.apastrosoftware.com%2Fapcc_dow
> nload%2Fapcc-
> std.pdf&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaa
> aaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=YF3Oh6Ce%2Fh%2BwCQEe%2FUPZTKBhSgqj
> uwlXCg6u9yMLOgM%3D&amp;reserved=0
>
> APCC Pro PDF:
> https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.apastrosoftware.com%2Fapcc_dow
> nload%2Fapcc-
> pro.pdf&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaa
> aaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=tFNKJyAPRawNeKLpibPWGR5EyCzJTaFYgG0
> VDkpEhNM%3D&amp;reserved=0
>
> -Ray Gralak
> Author of APCC (Astro-Physics Command Center):
> https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-
> pro&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaa
> aaaaa%7C1%7C0%7C637260454274942528&amp;sdata=F6gvmHzFDNP%2BJAD%2B8jExUIswhl7kgBzojcS
> M5WNKNIg%3D&amp;reserved=0
> <https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-
> pro&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaa
> aaaaa%7C1%7C0%7C637260454274942528&amp;sdata=F6gvmHzFDNP%2BJAD%2B8jExUIswhl7kgBzojcS
> M5WNKNIg%3D&amp;reserved=0>
> Author of PEMPro V3:
> https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%
> 7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
> %7C637260454274942528&amp;sdata=58JmvmgtI3AsOGZrHjVqlbPyCxtFOIJJuIIApGt4EvY%3D&amp;reserv
> ed=0
> <https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02
> %7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C
> 0%7C637260454274942528&amp;sdata=58JmvmgtI3AsOGZrHjVqlbPyCxtFOIJJuIIApGt4EvY%3D&amp;reser
> ved=0>
> Author of Astro-Physics V2 ASCOM Driver:
> https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&a
> mp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaaa
> a%7C1%7C0%7C637260454274952514&amp;sdata=UWVzbzixhnJx7qAJrgP81PLJBLkl6dE%2B1oN4YO99uy
> E%3D&amp;reserved=0
> <https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&
> amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaa
> aa%7C1%7C0%7C637260454274952514&amp;sdata=UWVzbzixhnJx7qAJrgP81PLJBLkl6dE%2B1oN4YO99u
> yE%3D&amp;reserved=0>
>
>
>
>
>
>





Bill Long
 

Ok, makes sense. Installed and is running fine. Thanks!


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Ray Gralak <groups3@...>
Sent: Monday, May 25, 2020 6:35 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] APCC Standard v1.8.2.0 and APCC Pro v1.8.2.1
 
> Thanks Ray. I dont usually have this problem, but APCC Pro cannot see that an update is available.

The download links are in the post.

Some people wanted direct download links and an announcement when the updates are available. This is that!

I'll update the download link in a few days.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://eur05.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-pro&amp;data=02%7C01%7C%7Cf5ab9e592dcd4fe1b96308d801152133%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637260537544652642&amp;sdata=g9HnCB543%2Fg3tYjaVRWCJjUKvJ%2F9iplqZSNR8%2FRJzQI%3D&amp;reserved=0
Author of PEMPro V3:  https://eur05.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&amp;data=02%7C01%7C%7Cf5ab9e592dcd4fe1b96308d801152133%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637260537544652642&amp;sdata=LB%2Boz55Jrb661u5jGl%2FZuHKiwqXi5DVsC%2Bfu%2FCJitDs%3D&amp;reserved=0
Author of Astro-Physics V2 ASCOM Driver: https://eur05.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&amp;data=02%7C01%7C%7Cf5ab9e592dcd4fe1b96308d801152133%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637260537544652642&amp;sdata=KzyVTQDvT1SyjdPKXkqoHtnOhAUlAxB8OlA8NhwggXA%3D&amp;reserved=0

> -----Original Message-----
> From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Bill Long
> Sent: Monday, May 25, 2020 5:41 PM
> To: main@ap-gto.groups.io
> Subject: Re: [ap-gto] APCC Standard v1.8.2.0 and APCC Pro v1.8.2.1
>
> Thanks Ray. I dont usually have this problem, but APCC Pro cannot see that an update is available.
>
> ________________________________
>
> From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Ray Gralak <groups3@...>
> Sent: Monday, May 25, 2020 4:17 PM
> To: main@ap-gto.groups.io <main@ap-gto.groups.io>
> Subject: [ap-gto] APCC Standard v1.8.2.0 and APCC Pro v1.8.2.1
>
> Hello All,
>
> I am announcing the availability of APCC Standard 1.8.2.0 and APCC Pro 1.8.2.1 (links below).
>
> Most of the changes are bug fixes and are itemized here:
>
> APCC - BUG Fix - Tracking rates were not working correctly for the GTOCP3 in 1.8.1.1.
>
> APCC - BUG FIX - Prevent Mach 2 from setting HOME to be anything other than Park 3.
>
> APCC - BUG FIX - The ASCOM driver can send values in exponential notation when the value is near zero.
> APCC was rejecting this exponential notation.
>
> APCC - BUG Fix - Commands starting with "G_" were rejected.
>
> APCC - BUG Fix - Clear flashing scope view when user clears all errors.
>
> APCC - BUG FIX - Settings were not always being correctly saved.
>
> APCC - BUG Fix - Prevent possible overflow in Meridian Limits Add Point dialog.
>
> APCC - BUG FIX - Horizons - some of the menus did nothing.
>
> APCC - BUG FIX - Horizons - Fixed a number of display bugs and made the displayed data more useful.
>
> APCC - BUG Fix - fixed an integer overflow error that would happen occasionally.
>
> APCC Pro - BUG FIX - APPM - Slew would sometimes fail to appear to complete thus stalling data mapping
> runs.
>
> APCC Pro - BUG Fix - tracking rate correction was not always saved correctly.
>
> APCC - Improvement - Moved virtual port handlers to their own threads to reduce latency when user interface
> elements are updated.
>
> APCC - Improvement - In the Meridian Tracking Limits Explorer dialog window, add a button to update Meridian
> Inclination.
>
> APCC Standard 1.8.2.0:
> https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.apastrosoftware.com%2Fapcc_dow
> nload%2FAPCC_Standard_Setup_1.8.2.0.exe&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d801
> 01be39%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=iRQL4P
> Sfuk5q6ObBb7VLFU4H7Nuap3q3Q5xQjGhqzig%3D&amp;reserved=0
>
> APCC Pro 1.8.2.1:
> https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.apastrosoftware.com%2Fapcc_dow
> nload%2FAPCC_Pro_Setup_1.8.2.1.exe&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be3
> 9%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=ZFZA40sAdw
> Ll0P3IIh2MduVrjLQeX%2F2%2FHeSEpFg7KyA%3D&amp;reserved=0
>
> APCC Standard PDF:
> https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.apastrosoftware.com%2Fapcc_dow
> nload%2Fapcc-
> std.pdf&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaa
> aaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=YF3Oh6Ce%2Fh%2BwCQEe%2FUPZTKBhSgqj
> uwlXCg6u9yMLOgM%3D&amp;reserved=0
>
> APCC Pro PDF:
> https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.apastrosoftware.com%2Fapcc_dow
> nload%2Fapcc-
> pro.pdf&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaa
> aaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=tFNKJyAPRawNeKLpibPWGR5EyCzJTaFYgG0
> VDkpEhNM%3D&amp;reserved=0
>
> -Ray Gralak
> Author of APCC (Astro-Physics Command Center):
> https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-
> pro&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaa
> aaaaa%7C1%7C0%7C637260454274942528&amp;sdata=F6gvmHzFDNP%2BJAD%2B8jExUIswhl7kgBzojcS
> M5WNKNIg%3D&amp;reserved=0
> <https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-
> pro&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaa
> aaaaa%7C1%7C0%7C637260454274942528&amp;sdata=F6gvmHzFDNP%2BJAD%2B8jExUIswhl7kgBzojcS
> M5WNKNIg%3D&amp;reserved=0>
> Author of PEMPro V3:
> https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&amp;data=02%25
> 7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
> %7C637260454274942528&amp;sdata=58JmvmgtI3AsOGZrHjVqlbPyCxtFOIJJuIIApGt4EvY%3D&amp;reserv
> ed=0
> <https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&amp;data=02
> %7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C
> 0%7C637260454274942528&amp;sdata=58JmvmgtI3AsOGZrHjVqlbPyCxtFOIJJuIIApGt4EvY%3D&amp;reser
> ved=0>
> Author of Astro-Physics V2 ASCOM Driver:
> https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&a
> mp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaaa
> a%7C1%7C0%7C637260454274952514&amp;sdata=UWVzbzixhnJx7qAJrgP81PLJBLkl6dE%2B1oN4YO99uy
> E%3D&amp;reserved=0
> <https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&
> amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaa
> aa%7C1%7C0%7C637260454274952514&amp;sdata=UWVzbzixhnJx7qAJrgP81PLJBLkl6dE%2B1oN4YO99u
> yE%3D&amp;reserved=0>
>
>
>
>
>
>





 

Thanks, Ray.  Worked for me too.  Glad  you're announcing updates here.

Jerome


Leon
 

Ray,

I always watch the threads on all updates. When do you plan to update the website for the 1.8.2.1? Your attached email with the links does not work and I even tried the embedded links in the email and that didn't work. I think the only place I can download is from the Astro-physics website. that works fine.

thanks.

Also, if you have another moment to answer a very simple question, call it old age or anything else, but when using APCC, and I always get confused right off the bat regarding the tabs that are highlighted for use and the others that are grayed out....which is which? To me its like tornado watch and warning.......reason is I can never simply look and understand which is which and which is available when I am parked or not parked and seems its just not clear enough, don't know if any one has ever commented on this. What about obvious colors to use? Shaded and unshaded just doesn't get me to what i need to see. If they were colorized tabs , if they were Red and green, Red is not available to select, green is, I would know what to use but your tabs are shaded and unshaded, I know, i Know , geez what must one do to satisfy!!!!

Anyway, that's my question.. thanks. SO what I usually get hung up is at initial start up, I go to park 2 then turn on the scope, then pull up APCC, then connect, then I go to park screen and try to figure out what to do, So I'm parked now, do I unpark first, of course , then if so what tab, etc.......I'm usually OK when I'm closing up shop and go to park 2 and then park there. then shut down every thing. Any help or short cuts or understanding this a little better I would appreciate.

thanks. Leon Fasano






On Monday, May 25, 2020, 08:35:53 PM CDT, Ray Gralak <groups3@...> wrote:


> Thanks Ray. I dont usually have this problem, but APCC Pro cannot see that an update is available.

The download links are in the post.

Some people wanted direct download links and an announcement when the updates are available. This is that!

I'll update the download link in a few days.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3:  https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

> -----Original Message-----
> From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Bill Long
> Sent: Monday, May 25, 2020 5:41 PM
> To: main@ap-gto.groups.io
> Subject: Re: [ap-gto] APCC Standard v1.8.2.0 and APCC Pro v1.8.2.1
>
> Thanks Ray. I dont usually have this problem, but APCC Pro cannot see that an update is available.
>
> ________________________________
>
> From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Ray Gralak <groups3@...>
> Sent: Monday, May 25, 2020 4:17 PM
> To: main@ap-gto.groups.io <main@ap-gto.groups.io>
> Subject: [ap-gto] APCC Standard v1.8.2.0 and APCC Pro v1.8.2.1
>
> Hello All,
>
> I am announcing the availability of APCC Standard 1.8.2.0 and APCC Pro 1.8.2.1 (links below).
>
> Most of the changes are bug fixes and are itemized here:
>
> APCC - BUG Fix - Tracking rates were not working correctly for the GTOCP3 in 1.8.1.1.
>
> APCC - BUG FIX - Prevent Mach 2 from setting HOME to be anything other than Park 3.
>
> APCC - BUG FIX - The ASCOM driver can send values in exponential notation when the value is near zero.
> APCC was rejecting this exponential notation.
>
> APCC - BUG Fix - Commands starting with "G_" were rejected.
>
> APCC - BUG Fix - Clear flashing scope view when user clears all errors.
>
> APCC - BUG FIX - Settings were not always being correctly saved.
>
> APCC - BUG Fix - Prevent possible overflow in Meridian Limits Add Point dialog.
>
> APCC - BUG FIX - Horizons - some of the menus did nothing.
>
> APCC - BUG FIX - Horizons - Fixed a number of display bugs and made the displayed data more useful.
>
> APCC - BUG Fix - fixed an integer overflow error that would happen occasionally.
>
> APCC Pro - BUG FIX - APPM - Slew would sometimes fail to appear to complete thus stalling data mapping
> runs.
>
> APCC Pro - BUG Fix - tracking rate correction was not always saved correctly.
>
> APCC - Improvement - Moved virtual port handlers to their own threads to reduce latency when user interface
> elements are updated.
>
> APCC - Improvement - In the Meridian Tracking Limits Explorer dialog window, add a button to update Meridian
> Inclination.
>
> APCC Standard 1.8.2.0:
> https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.apastrosoftware.com%2Fapcc_dow
> nload%2FAPCC_Standard_Setup_1.8.2.0.exe&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d801
> 01be39%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=iRQL4P
> Sfuk5q6ObBb7VLFU4H7Nuap3q3Q5xQjGhqzig%3D&amp;reserved=0
>
> APCC Pro 1.8.2.1:
> https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.apastrosoftware.com%2Fapcc_dow
> nload%2FAPCC_Pro_Setup_1.8.2.1.exe&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be3
> 9%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=ZFZA40sAdw
> Ll0P3IIh2MduVrjLQeX%2F2%2FHeSEpFg7KyA%3D&amp;reserved=0
>
> APCC Standard PDF:
> https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.apastrosoftware.com%2Fapcc_dow
> nload%2Fapcc-
> std.pdf&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaa
> aaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=YF3Oh6Ce%2Fh%2BwCQEe%2FUPZTKBhSgqj
> uwlXCg6u9yMLOgM%3D&amp;reserved=0
>
> APCC Pro PDF:
> https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.apastrosoftware.com%2Fapcc_dow
> nload%2Fapcc-
> pro.pdf&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaa
> aaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=tFNKJyAPRawNeKLpibPWGR5EyCzJTaFYgG0
> VDkpEhNM%3D&amp;reserved=0
>
> -Ray Gralak
> Author of APCC (Astro-Physics Command Center):
> https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-
> pro&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaa
> aaaaa%7C1%7C0%7C637260454274942528&amp;sdata=F6gvmHzFDNP%2BJAD%2B8jExUIswhl7kgBzojcS
> M5WNKNIg%3D&amp;reserved=0
> <https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-
> pro&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaa
> aaaaa%7C1%7C0%7C637260454274942528&amp;sdata=F6gvmHzFDNP%2BJAD%2B8jExUIswhl7kgBzojcS
> M5WNKNIg%3D&amp;reserved=0>
> Author of PEMPro V3:
> https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%
> 7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
> %7C637260454274942528&amp;sdata=58JmvmgtI3AsOGZrHjVqlbPyCxtFOIJJuIIApGt4EvY%3D&amp;reserv
> ed=0
> <https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02
> %7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C
> 0%7C637260454274942528&amp;sdata=58JmvmgtI3AsOGZrHjVqlbPyCxtFOIJJuIIApGt4EvY%3D&amp;reser
> ved=0>
> Author of Astro-Physics V2 ASCOM Driver:
> https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&a
> mp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaaa
> a%7C1%7C0%7C637260454274952514&amp;sdata=UWVzbzixhnJx7qAJrgP81PLJBLkl6dE%2B1oN4YO99uy
> E%3D&amp;reserved=0
> <https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&
> amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaa
> aa%7C1%7C0%7C637260454274952514&amp;sdata=UWVzbzixhnJx7qAJrgP81PLJBLkl6dE%2B1oN4YO99u
> yE%3D&amp;reserved=0>
>
>
>
>
>
>





 

Hello Leon,

 

The website has been updated with the new APCC versions and associated PDF files. Be sure to clear your browser cache if they don’t show up for you.

 

Clear Skies,

 

Marj Christen

Astro-Physics, Inc

11250 Forest Hills Rd

Machesney Park, IL 61115

Phone: 815-282-1513

Fax: 815-282-9847

www.astro-physics.com

 

From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Leon via groups.io
Sent: Wednesday, May 27, 2020 3:06 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] APCC Standard v1.8.2.0 and APCC Pro v1.8.2.1

 

Ray,

I always watch the threads on all updates. When do you plan to update the website for the 1.8.2.1? Your attached email with the links does not work and I even tried the embedded links in the email and that didn't work. I think the only place I can download is from the Astro-physics website. that works fine.

thanks.

Also, if you have another moment to answer a very simple question, call it old age or anything else, but when using APCC, and I always get confused right off the bat regarding the tabs that are highlighted for use and the others that are grayed out....which is which? To me its like tornado watch and warning.......reason is I can never simply look and understand which is which and which is available when I am parked or not parked and seems its just not clear enough, don't know if any one has ever commented on this. What about obvious colors to use? Shaded and unshaded just doesn't get me to what i need to see. If they were colorized tabs , if they were Red and green, Red is not available to select, green is, I would know what to use but your tabs are shaded and unshaded, I know, i Know , geez what must one do to satisfy!!!!

Anyway, that's my question.. thanks. SO what I usually get hung up is at initial start up, I go to park 2 then turn on the scope, then pull up APCC, then connect, then I go to park screen and try to figure out what to do, So I'm parked now, do I unpark first, of course , then if so what tab, etc.......I'm usually OK when I'm closing up shop and go to park 2 and then park there. then shut down every thing. Any help or short cuts or understanding this a little better I would appreciate.

thanks. Leon Fasano





On Monday, May 25, 2020, 08:35:53 PM CDT, Ray Gralak <groups3@...> wrote:

 

 

> Thanks Ray. I dont usually have this problem, but APCC Pro cannot see that an update is available.

The download links are in the post.

Some people wanted direct download links and an announcement when the updates are available. This is that!

I'll update the download link in a few days.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3:  https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

> -----Original Message-----
> From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Bill Long
> Sent: Monday, May 25, 2020 5:41 PM
> To: main@ap-gto.groups.io
> Subject: Re: [ap-gto] APCC Standard v1.8.2.0 and APCC Pro v1.8.2.1
>
> Thanks Ray. I dont usually have this problem, but APCC Pro cannot see that an update is available.
>
> ________________________________
>
> From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Ray Gralak <groups3@...>
> Sent: Monday, May 25, 2020 4:17 PM
> To: main@ap-gto.groups.io <main@ap-gto.groups.io>
> Subject: [ap-gto] APCC Standard v1.8.2.0 and APCC Pro v1.8.2.1
>
> Hello All,
>
> I am announcing the availability of APCC Standard 1.8.2.0 and APCC Pro 1.8.2.1 (links below).
>
> Most of the changes are bug fixes and are itemized here:
>
> APCC - BUG Fix - Tracking rates were not working correctly for the GTOCP3 in 1.8.1.1.
>
> APCC - BUG FIX - Prevent Mach 2 from setting HOME to be anything other than Park 3.
>
> APCC - BUG FIX - The ASCOM driver can send values in exponential notation when the value is near zero.
> APCC was rejecting this exponential notation.
>
> APCC - BUG Fix - Commands starting with "G_" were rejected.
>
> APCC - BUG Fix - Clear flashing scope view when user clears all errors.
>
> APCC - BUG FIX - Settings were not always being correctly saved.
>
> APCC - BUG Fix - Prevent possible overflow in Meridian Limits Add Point dialog.
>
> APCC - BUG FIX - Horizons - some of the menus did nothing.
>
> APCC - BUG FIX - Horizons - Fixed a number of display bugs and made the displayed data more useful.
>
> APCC - BUG Fix - fixed an integer overflow error that would happen occasionally.
>
> APCC Pro - BUG FIX - APPM - Slew would sometimes fail to appear to complete thus stalling data mapping
> runs.
>
> APCC Pro - BUG Fix - tracking rate correction was not always saved correctly.
>
> APCC - Improvement - Moved virtual port handlers to their own threads to reduce latency when user interface
> elements are updated.
>
> APCC - Improvement - In the Meridian Tracking Limits Explorer dialog window, add a button to update Meridian
> Inclination.
>
> APCC Standard 1.8.2.0:
> https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.apastrosoftware.com%2Fapcc_dow
> nload%2FAPCC_Standard_Setup_1.8.2.0.exe&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d801
> 01be39%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=iRQL4P
> Sfuk5q6ObBb7VLFU4H7Nuap3q3Q5xQjGhqzig%3D&amp;reserved=0
>
> APCC Pro 1.8.2.1:
> https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.apastrosoftware.com%2Fapcc_dow
> nload%2FAPCC_Pro_Setup_1.8.2.1.exe&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be3
> 9%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=ZFZA40sAdw
> Ll0P3IIh2MduVrjLQeX%2F2%2FHeSEpFg7KyA%3D&amp;reserved=0
>
> APCC Standard PDF:
> https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.apastrosoftware.com%2Fapcc_dow
> nload%2Fapcc-
> std.pdf&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaa
> aaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=YF3Oh6Ce%2Fh%2BwCQEe%2FUPZTKBhSgqj
> uwlXCg6u9yMLOgM%3D&amp;reserved=0
>
> APCC Pro PDF:
> https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.apastrosoftware.com%2Fapcc_dow
> nload%2Fapcc-
> pro.pdf&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaa
> aaaaaaaa%7C1%7C0%7C637260454274942528&amp;sdata=tFNKJyAPRawNeKLpibPWGR5EyCzJTaFYgG0
> VDkpEhNM%3D&amp;reserved=0
>
> -Ray Gralak
> Author of APCC (Astro-Physics Command Center):
> https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-
> pro&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaa
> aaaaa%7C1%7C0%7C637260454274942528&amp;sdata=F6gvmHzFDNP%2BJAD%2B8jExUIswhl7kgBzojcS
> M5WNKNIg%3D&amp;reserved=0
> <https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-
> pro&amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaa
> aaaaa%7C1%7C0%7C637260454274942528&amp;sdata=F6gvmHzFDNP%2BJAD%2B8jExUIswhl7kgBzojcS
> M5WNKNIg%3D&amp;reserved=0>
> Author of PEMPro V3:
> https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%
> 7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
> %7C637260454274942528&amp;sdata=58JmvmgtI3AsOGZrHjVqlbPyCxtFOIJJuIIApGt4EvY%3D&amp;reserv
> ed=0
> <https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02
> %7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C
> 0%7C637260454274942528&amp;sdata=58JmvmgtI3AsOGZrHjVqlbPyCxtFOIJJuIIApGt4EvY%3D&amp;reser
> ved=0>
> Author of Astro-Physics V2 ASCOM Driver:
> https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&a
> mp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaaa
> a%7C1%7C0%7C637260454274952514&amp;sdata=UWVzbzixhnJx7qAJrgP81PLJBLkl6dE%2B1oN4YO99uy
> E%3D&amp;reserved=0
> <https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&
> amp;data=02%7C01%7C%7Cd3819656ab894ec5dd6c08d80101be39%7C84df9e7fe9f640afb435aaaaaaaaaa
> aa%7C1%7C0%7C637260454274952514&amp;sdata=UWVzbzixhnJx7qAJrgP81PLJBLkl6dE%2B1oN4YO99u
> yE%3D&amp;reserved=0>
>
>
>
>
>
>




 

Ray,

Thank you for all the work you did to prepare this new version and make it available over the holiday weekend in addition to the other tech support that you did. Your efforts are truly appreciated!

Clear Skies,

Marj Christen
Astro-Physics, Inc
11250 Forest Hills Rd
Machesney Park, IL 61115
Phone: 815-282-1513
Fax: 815-282-9847
www.astro-physics.com

-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Ray Gralak
Sent: Monday, May 25, 2020 6:17 PM
To: main@ap-gto.groups.io
Subject: [ap-gto] APCC Standard v1.8.2.0 and APCC Pro v1.8.2.1

Hello All,

I am announcing the availability of APCC Standard 1.8.2.0 and APCC Pro 1.8.2.1 (links below).

Most of the changes are bug fixes and are itemized here:

APCC - BUG Fix - Tracking rates were not working correctly for the GTOCP3 in 1.8.1.1.

APCC - BUG FIX - Prevent Mach 2 from setting HOME to be anything other than Park 3.

APCC - BUG FIX - The ASCOM driver can send values in exponential notation when the value is near zero. APCC was rejecting this exponential notation.

APCC - BUG Fix - Commands starting with "G_" were rejected.

APCC - BUG Fix - Clear flashing scope view when user clears all errors.

APCC - BUG FIX - Settings were not always being correctly saved.

APCC - BUG Fix - Prevent possible overflow in Meridian Limits Add Point dialog.

APCC - BUG FIX - Horizons - some of the menus did nothing.

APCC - BUG FIX - Horizons - Fixed a number of display bugs and made the displayed data more useful.

APCC - BUG Fix - fixed an integer overflow error that would happen occasionally.

APCC Pro - BUG FIX - APPM - Slew would sometimes fail to appear to complete thus stalling data mapping runs.

APCC Pro - BUG Fix - tracking rate correction was not always saved correctly.

APCC - Improvement - Moved virtual port handlers to their own threads to reduce latency when user interface elements are updated.

APCC - Improvement - In the Meridian Tracking Limits Explorer dialog window, add a button to update Meridian Inclination.

APCC Standard 1.8.2.0:
http://www.apastrosoftware.com/apcc_download/APCC_Standard_Setup_1.8.2.0.exe

APCC Pro 1.8.2.1:
http://www.apastrosoftware.com/apcc_download/APCC_Pro_Setup_1.8.2.1.exe

APCC Standard PDF:
http://www.apastrosoftware.com/apcc_download/apcc-std.pdf

APCC Pro PDF:
http://www.apastrosoftware.com/apcc_download/apcc-pro.pdf

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


Leon
 

Thank you as always.

On May 27, 2020, at 5:39 PM, Marj Christen <marj@astro-physics.com> wrote:

Ray,

Thank you for all the work you did to prepare this new version and make it available over the holiday weekend in addition to the other tech support that you did. Your efforts are truly appreciated!

Clear Skies,

Marj Christen
Astro-Physics, Inc
11250 Forest Hills Rd
Machesney Park, IL 61115
Phone: 815-282-1513
Fax: 815-282-9847
www.astro-physics.com

-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Ray Gralak
Sent: Monday, May 25, 2020 6:17 PM
To: main@ap-gto.groups.io
Subject: [ap-gto] APCC Standard v1.8.2.0 and APCC Pro v1.8.2.1

Hello All,

I am announcing the availability of APCC Standard 1.8.2.0 and APCC Pro 1.8.2.1 (links below).

Most of the changes are bug fixes and are itemized here:

APCC - BUG Fix - Tracking rates were not working correctly for the GTOCP3 in 1.8.1.1.

APCC - BUG FIX - Prevent Mach 2 from setting HOME to be anything other than Park 3.

APCC - BUG FIX - The ASCOM driver can send values in exponential notation when the value is near zero. APCC was rejecting this exponential notation.

APCC - BUG Fix - Commands starting with "G_" were rejected.

APCC - BUG Fix - Clear flashing scope view when user clears all errors.

APCC - BUG FIX - Settings were not always being correctly saved.

APCC - BUG Fix - Prevent possible overflow in Meridian Limits Add Point dialog.

APCC - BUG FIX - Horizons - some of the menus did nothing.

APCC - BUG FIX - Horizons - Fixed a number of display bugs and made the displayed data more useful.

APCC - BUG Fix - fixed an integer overflow error that would happen occasionally.

APCC Pro - BUG FIX - APPM - Slew would sometimes fail to appear to complete thus stalling data mapping runs.

APCC Pro - BUG Fix - tracking rate correction was not always saved correctly.

APCC - Improvement - Moved virtual port handlers to their own threads to reduce latency when user interface elements are updated.

APCC - Improvement - In the Meridian Tracking Limits Explorer dialog window, add a button to update Meridian Inclination.

APCC Standard 1.8.2.0:
http://www.apastrosoftware.com/apcc_download/APCC_Standard_Setup_1.8.2.0.exe

APCC Pro 1.8.2.1:
http://www.apastrosoftware.com/apcc_download/APCC_Pro_Setup_1.8.2.1.exe

APCC Standard PDF:
http://www.apastrosoftware.com/apcc_download/apcc-std.pdf

APCC Pro PDF:
http://www.apastrosoftware.com/apcc_download/apcc-pro.pdf

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver







Worsel
 
Edited

Leon

Anyway, that's my question.. thanks. SO what I usually get hung up is at initial start up, I go to park 2 then turn on the scope, then pull up APCC, then connect, then I go to park screen and try to figure out what to do, So I'm parked now, do I unpark first, of course , then if so what tab, etc.......I'm usually OK when I'm closing up shop and go to park 2 and then park there. then shut down every thing. Any help or short cuts or understanding this a little better I would appreciate.

While I defer to A-P and Ray Gralak, I think you may be overworking this.

If you have got everything set in Settings-> Edit Initial Mount Settings along with the AP Driver, then you should be able to startup APCC and be ready to slew to a target.  When you finish, you can just power down the mount; although I choose to Park 4 due to observatory roof clearance.

Bryan


Leon
 

Thanks for the insight, I went there and adjusted settings, this will be better. Thanks again. Leon


On May 27, 2020, at 6:57 PM, Worsel via groups.io <bryancashion@...> wrote:

Leon

Anyway, that's my question.. thanks. SO what I usually get hung up is at initial start up, I go to park 2 then turn on the scope, then pull up APCC, then connect, then I go to park screen and try to figure out what to do, So I'm parked now, do I unpark first, of course , then if so what tab, etc.......I'm usually OK when I'm closing up shop and go to park 2 and then park there. then shut down every thing. Any help or short cuts or understanding this a little better I would appreciate.

While I defer to A-P and Ray Gralak, I think you may be overworking this.

If you have set got everything set in Settings-> Edit Initial Mount Settings along with the AP Driver, then you should be able to startup APCC and be ready to slew to a target.  When you finish, you can just power down the mount; although I choose to Park 4 due to observatory roof clearance.

Bryan


 

Hi Ray,

I'm glad you're still updating APCC, but I wish you would announce the new versions here or anywhere. 

From another user's problem, I happened to find out today that there is a new 1.8.3.1 version.  

Along with others, my install of APCC never alerts to a new version.  All I ever get is:

"You are running this version of APCC: 1.8.2.1"    (whatever version it might be)
           "The latest version of APCC is:"
                       (BLANK LINE)
                         "OK" button

I hope you will try to inform those of us in this situation.

Jerome


Cheng-Yang Tan
 

Hi Ray,
   Perhaps there is another mechanism to check for updates within APCC that doesn't use any .net protocols. For example, from my experience, PEMPro always alerts me when there are available updates.

cytan

On Friday, June 5, 2020, 10:28:51 PM CDT, Jerome Allison <jallison@...> wrote:


Hi Ray,

I'm glad you're still updating APCC, but I wish you would announce the new versions here or anywhere. 

From another user's problem, I happened to find out today that there is a new 1.8.3.1 version.  

Along with others, my install of APCC never alerts to a new version.  All I ever get is:

"You are running this version of APCC: 1.8.2.1"    (whatever version it might be)
           "The latest version of APCC is:"
                       (BLANK LINE)
                         "OK" button

I hope you will try to inform those of us in this situation.

Jerome


Ray Gralak
 

I'm glad you're still updating APCC, but I wish you would announce the new versions here or anywhere.
I won't always announce every build immediately. It depends on the criticality of the build and if I would like to get feedback first before announcing it. I may even skip announcing a version if it looks like another needs to be released soon.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Jerome Allison
Sent: Friday, June 5, 2020 8:29 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] APCC Standard v1.8.2.0 and APCC Pro v1.8.2.1

Hi Ray,

I'm glad you're still updating APCC, but I wish you would announce the new versions here or anywhere.

From another user's problem, I happened to find out today that there is a new 1.8.3.1 version.

Along with others, my install of APCC never alerts to a new version. All I ever get is:

"You are running this version of APCC: 1.8.2.1" (whatever version it might be)
"The latest version of APCC is:"
(BLANK LINE)
"OK" button

I hope you will try to inform those of us in this situation.

Jerome


Ray Gralak
 

Perhaps there is another mechanism to check for updates within APCC that doesn't use any .net protocols. For
example, from my experience, PEMPro always alerts me when there are available updates.
PEMPro and APCC use exactly the same mechanism which leads me to believe, at least in your case, either Windows firewall or your AV program is blocking APCC.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via groups.io
Sent: Friday, June 5, 2020 8:33 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] APCC Standard v1.8.2.0 and APCC Pro v1.8.2.1

Hi Ray,
Perhaps there is another mechanism to check for updates within APCC that doesn't use any .net protocols. For
example, from my experience, PEMPro always alerts me when there are available updates.

cytan

On Friday, June 5, 2020, 10:28:51 PM CDT, Jerome Allison <jallison@netdoor.com> wrote:


Hi Ray,

I'm glad you're still updating APCC, but I wish you would announce the new versions here or anywhere.

From another user's problem, I happened to find out today that there is a new 1.8.3.1 version.

Along with others, my install of APCC never alerts to a new version. All I ever get is:

"You are running this version of APCC: 1.8.2.1" (whatever version it might be)
"The latest version of APCC is:"
(BLANK LINE)
"OK" button

I hope you will try to inform those of us in this situation.

Jerome


Worsel
 

Ray

There are several of us that have made the same observation in this thread about the lack of notification.  That reduces the likelihood of MS or AV being the cause.  What info can we provide to help suss this out?

One common factor may be APPC Pro versus Standard, which strikes me as odd, since they likely use the same mechanism.

P.S.  What is your process for getting feedback, if the users do not know about the new build?

Bryan


Ray Gralak
 

Bryan,

Offhand I can't think of anything besides the version of .Net Framework that is different between PEMPro and APCC. Of course standard and pro APCC use the exact same routine and .Net Framework version.

That said, this weekend I need to finish a build for PEMPro that will work with the 62MP Sony sensors so it will have to wait until next week before I can take a look at the "check for updates" logic again.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Worsel via groups.io
Sent: Saturday, June 6, 2020 9:52 AM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] APCC Standard v1.8.2.0 and APCC Pro v1.8.2.1

Ray

There are several of us that have made the same observation in this thread about the lack of notification. That
reduces the likelihood of MS or AV being the cause. What info can we provide to help suss this out?

One common factor may be APPC Pro versus Standard, which strikes me as odd, since they likely use the same
mechanism.

P.S. What is your process for getting feedback, if the users do not know about the new build?

Bryan


Worsel
 

Ray

Thanks!

Bryan