APCC Pro MGBOX GPS connection #APCC
Claude Benoit
For some strange reason when I try to connect to MGBOXv2 / GPS using APCC Pro 1.8.0.5 a dialogue pops up saying "Closing GPS Connection MGBoxV2: Cannot create ActiveX component." I have MGBOXV2 setup on Com 3 using the ASCOM chooser. I can connect to the environmental settings and a test shows the data comes in.
Thanks for your thoughts on this. Claude
|
|
Ray Gralak
Hi Claude,
For some strange reason when I try to connect to MGBOXv2 / GPS using APCC Pro 1.8.0.5 a dialogue pops upThat usually means the MGBox ObservingConditions ASCOM driver is not installed, or not properly installed. -Ray Gralak Author of APCC (Astro-Physics Command Center): http://www.astro-physics.com/index.htm?products/accessories/software/apcc/apcc Author of PEMPro V3: https://www.ccdware.com Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver -----Original Message-----
|
|
Tony Benjamin
I have the MGBoxV2 GPS as well and using APCC Pro 1.8.0.5.
toggle quoted messageShow quoted text
It all works properly for me. When you say you have it on "COM 3" - shouldn't it be set to "MGBoxV2" under COM Port id APCC??
-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Ray Gralak Sent: March 8, 2020 3:04 PM To: main@ap-gto.groups.io Subject: Re: [ap-gto] APCC Pro MGBOX GPS connection #APCC #APCC Hi Claude, For some strange reason when I try to connect to MGBOXv2 / GPS usingThat usually means the MGBox ObservingConditions ASCOM driver is not installed, or not properly installed. -Ray Gralak Author of APCC (Astro-Physics Command Center): http://www.astro-physics.com/index.htm?products/accessories/software/apcc/apcc Author of PEMPro V3: https://www.ccdware.com Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver -----Original Message-----
|
|
Tony Benjamin
I have the MGBoxV2 GPS as well and using APCC Pro 1.8.0.5.
It all works properly for me.
When you say you have it on "COM 3" - shouldn't it be set to "MGBoxV2" under COM Port id APCC??
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Claude Benoit via Groups.Io
For some strange reason when I try to connect to MGBOXv2 / GPS using APCC Pro 1.8.0.5 a dialogue pops up saying "Closing GPS Connection MGBoxV2: Cannot create ActiveX component." I have MGBOXV2 setup on Com 3 using the ASCOM chooser. I can connect to the environmental settings and a test shows the data comes in.
|
|
Bill Long
Looks like its pretty cold where you are at. A whopping -271.3 C!
From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Tony Benjamin <tonybenjamin@...>
Sent: Sunday, March 8, 2020 3:16 PM To: main@ap-gto.groups.io <main@ap-gto.groups.io> Subject: Re: [ap-gto] APCC Pro MGBOX GPS connection #APCC #APCC I have the MGBoxV2 GPS as well and using APCC Pro 1.8.0.5.
It all works properly for me. When you say you have it on "COM 3" - shouldn't it be set to "MGBoxV2" under COM Port id APCC?? -----Original Message----- From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Ray Gralak Sent: March 8, 2020 3:04 PM To: main@ap-gto.groups.io Subject: Re: [ap-gto] APCC Pro MGBOX GPS connection #APCC #APCC Hi Claude, > For some strange reason when I try to connect to MGBOXv2 / GPS using > APCC Pro 1.8.0.5 a dialogue pops up saying "Closing GPS Connection > MGBoxV2: Cannot create ActiveX component." I have MGBOXV2 setup on Com > 3 using the ASCOM chooser. I can connect to the environmental settings and a test shows the data comes in. That usually means the MGBox ObservingConditions ASCOM driver is not installed, or not properly installed. -Ray Gralak Author of APCC (Astro-Physics Command Center): https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.astro-physics.com%2Findex.htm%3Fproducts%2Faccessories%2Fsoftware%2Fapcc%2Fapcc&data=02%7C01%7C%7C3032bb2c77154f18a87008d7c3ae5567%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637193025826359198&sdata=G46H7wf6RRg3uWNK%2FrSIe4ipyc8USvovl1If4tIpaUU%3D&reserved=0 Author of PEMPro V3: https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com&data=02%7C01%7C%7C3032bb2c77154f18a87008d7c3ae5567%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637193025826359198&sdata=fuwHaKoFedqR1rn22Ud%2BpBEIiyYBsFozBt978Pxkf30%3D&reserved=0 Author of Astro-Physics V2 ASCOM Driver: https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&data=02%7C01%7C%7C3032bb2c77154f18a87008d7c3ae5567%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637193025826359198&sdata=J%2BNwckDOGobIfqJHspAyYkCaWwv4rjhlrXORhJD2t0o%3D&reserved=0 > -----Original Message----- > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Claude Benoit via Groups.Io > Sent: Sunday, March 8, 2020 2:46 PM > To: main@ap-gto.groups.io > Subject: [ap-gto] APCC Pro MGBOX GPS connection #APCC #APCC > > For some strange reason when I try to connect to MGBOXv2 / GPS using APCC Pro 1.8.0.5 a dialogue pops up > saying "Closing GPS Connection MGBoxV2: Cannot create ActiveX component." I have MGBOXV2 setup on > Com 3 using the ASCOM chooser. I can connect to the environmental settings and a test shows the data comes > in. > > Thanks for your thoughts on this. > Claude >
|
|
Tony Benjamin
Yes, LOL. I sent the wrong JPEG J
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Bill Long
Sent: March 8, 2020 3:19 PM To: main@ap-gto.groups.io Subject: Re: [ap-gto] APCC Pro MGBOX GPS connection #APCC #APCC
Looks like its pretty cold where you are at. A whopping -271.3 C!
From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Tony Benjamin <tonybenjamin@...>
I have the MGBoxV2 GPS as well and using APCC Pro 1.8.0.5.
|
|
Tony Benjamin
Oh, yeah. And for what its worth I did make a short video about the MGBoxV@/GPS :)
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Claude Benoit via Groups.Io
For some strange reason when I try to connect to MGBOXv2 / GPS using APCC Pro 1.8.0.5 a dialogue pops up saying "Closing GPS Connection MGBoxV2: Cannot create ActiveX component." I have MGBOXV2 setup on Com 3 using the ASCOM chooser. I can connect to the environmental settings and a test shows the data comes in.
|
|