Thank you so much for this Bryan, much appreciated! I’m thinking I should be good as well but I don’t know what to expect. I have to believe that it should be quite close. Thanks! Dale

Hello Everyone, I hope this is ok to post here but, (if its not I’m sorry please delete this post) I’m just wondering what software you guys are using to control your AP mounts? I know many are using

Thanks for this post! I’m waiting for my V2 chip to get here today and I’m planning on doing the upgrade and firmware updates as well. All great information here! I’ve been working with George and he

Dale

Hi Jeff, Ok I was just wondering is all and good info for me down the road! My plan is to call Monday and order the new chip for my CP3 like I think Dale mentioned for $80. Once I install it I plan to

On Sun, Feb 13, 2022 at 02:19 PM, Jeffc wrote: Coment is in red. I’m not an expert on PemPro PEC curve generation .. however… I let it acquire data for 11 cycles. (With PEC off). PemPro does some curv

I’ve always used a star that is within +/- 5º declination and within 30-60 minutes of the meridian, but I don’t know what the recommendations are for AP mounts. As of right now I would use the same ru

Thank for sharing this Jeff! I’m planning on calling George tomorrow and get the updated chip for my CP3. I was wondering if the extraction tool come with the kit and you answered my question with you

Thanks Roland, you know maybe thats what I remember about the PEC part. I’ll give George a call on Monday and see about ordering the new V3 chip for my mount. Thanks! Dale

Ok thanks Dale, much appreciated for that info! Boy I thought the AAPC software come with it but maybe I misunderstood when reading the information between the 2 version. I’ll have to do some more res

Sorry about the goof on the last reply, Thank you so much Dale, I don’t really need the CP4 so the chip seems to be the logical choice especially for $80. I would need to purchase APCC in order to do

On Sat, Feb 12, 2022 at 07:35 PM, Dale Ghent wrote: You could upgrade to a CP4, but you don't have to just for 999x slew speeds. The firmware of the CP3 is implemented as a ROM chip that you can pluck

Thanks for this information Ray. So I have to upgrade from CP3 to the CP4 chip in order for SC to follow thru to the AP Ascom driver settings then? Dale

Hello Everyone, I’ve been a member for a little while and I finally got the mount I’ve been wanting for a long time. Its my AP1200 GTO CP3. (As a 32+ yr tool and die maker I appreciate the quality of

Well deserved sir!

Beautiful!