Hi Chris, Just curious, but where in APCC do you enable/disable Polar axis Correction. Thanks, Mike

Thanks Brian, I was not not sure if they got automatically disabled. Mike

I plan on creating a new model with appm. If I already have a model in apcc, shoulld I disable the pointing and tracking model before creating a new model. Thanks,''

Is there a way that when you run a model, that if you points that failed that you can just rerun those points to complete the model. I had several points in a 200 pt model that for some reason failed

Thanks Joe, I had a conflict with my firewall. I closed everything out one more time and rebooted and it finally is working. Thanks everyone for the help. Mike

I just installed the 2.0 beta version, and the server enabled button is now present. However, when I enable I now get the following error. I will have to think on this one awhile. I appreciate all the

Here is what my General screen looks like. I just loaded version 1.10 HF3 this morning. They must have changed something. Mike

I have looked under the general tab but I can not find as anywhere to enable the server. I may be blind and it is right in front of me....I will look again Thanks, Mike

The camera is connected in Nina. I think I need to enable the server in Nina, but not sure how to enable the server. I will watch the video that Mark recommended. Thanks Mike

I keep getting this error message when trying to connect my to nina with my camera. I am sure it is some simple setting. Any ideas

Another question. I am going to try and us NINa for camera control. How do you enable the server in nina so that I can connect to appm. Mike

Hi Ray, forgot to include that I am using a C11 edge with 0.7 reducer for a pixel scale of about 0.4

HI Ray, Not sure why image is taller than wide. I show it as 1761 x 2328. I do not see how I can have drift in such a short exposure. I am trying to use the nasa skyview test things ourt but am having

HI Ray, I have attached a image and it seems to show the stars. Not sure why they are oval ???. The software seems to platesolve but when the view image screen pops up I don’t see the image. https://1

I have been working on building a model with my Mach2 and when the view image screen pops up , it is blank, however the program is plate solving ok. I am using a qhy163 under ascom. Do I have somethin

Ok, I finally got it working. In the telescope setup in the driver I had to deselect all the boxes and then select the com port that I wanted and hit ok, it would then save the com port. Thanks everyo

I can connect to the mount by ethernet at 192.168.1.36 but the driver has 192.168.1.13 and it will not let me change it in the driver. Somehow I need to clear that ip address from the driver. Mike

Tom, Did the ascom driver act the same way that I have described , not letting you go back to a com port. Mike

I have Ascom platform 6.1 SP1 in fact I just reinstalled, .Net 3.5 is enabled and .Net Framework 4.8 is installed. It seems that Ip address is latched and it will not let me get out. Can the CP5 be ke

I can switch it in the window that you have above to a come port, and then I hit ok. but when I open it up again it has the ip address in the window. It will not let me clear the ip address. I have un