Thanks Rolando, I'm waiting for your advice as to when this will happen again.

Joe, I too had to clean a TV remote control with this problem. Thanks for the photo. There with the AP keypad I went there quiet. I'm not sure I have exceeded 95 °F (35 °C). It was not a thermal strip

Hi, It may only be part postponed,but if they were oily structures stuck on contacts and preventing the activation of the button, one could think that a dose of heat could thin the thing. So with the

Hi Joe, Thank you for the link to the related topic, actually the problem could be of this nature, since since 2011 I used this keypad in a common way and it has, depending on the period, lived betwee

Hi AP, The keypad (3388GTO) of my Mach1 dating a little (2011) I took advantage of the command of my Mach2 to take a battery to replace the original one. Everything went well and upon reignition I fou

Hi Rolando, It rolls for me quite like that. On June 14 I threw a photo spoiled by the clouds and I did not realize it until after. Without guidance no worries for the following takes ... and tonight

Hi Terri, I still have a doubt about this case that I had detected, because with my mach1 GTOCP4 that I had before I always had the keypad plugged in and I think that (Like the PC) was enough for Skys

Hi Terri, I noticed the same thing and I have already reported it, without the Mach2 connected to the PC (APCC and / or driver), with skysafari connected to the CP5 you can only move the mount with th

Me too, I would like to be able to have it, even if with the PC it goes perfectly well, because once the model is done it rolls by itself.His arrival with my stowaway's 92TCC will make him happy. And

Hi Ernie, Happy for you that you are finally your Mach2 ... and there you change a little world. I started with Astro-Physics in 2011 (Mach1 which I still have) ... and then I continued ... Thank you

#Mach2GTO

Superb Rolando,the Mach2 is really made to relieve us of the guide. I tested the 2nd evening for my Mach2 after a 35 point modeling of the 600 "poses on M109 ... with round stars as I had rarely succe

Hello, I confirm that the combination Mach1CP3 / SKYFi3 / standard RS232-USB converter / Safari 5 plus works well on my Android Cell phone. However, I still have the keyboard plugged in and in particu

Thank you Rolando, Regarding the GTOCP5 WIFI network shutdown. Everything is connected to the electrical network (220V) by transformers in 19.6v for the PC, 24v for the mount and in 12v for the rest (

#Mach2GTO

But there they are ... May 24 : M106 https://astrob.in/full/447k54/B/ May 25 : Chaine de Markarian https://astrob.in/full/fw1er8/B/ May 26 : M63 https://astrob.in/full/rof6xq/B/ May 27 : M100 https://

#Mach2GTO

Hello Rolando, Thank you for all its tracks to study. After having made an 86 point modeling on a MES to improve, r I made for 5 consecutive nights photos without 3 'and 4' guidance without worries, w

#Mach2GTO

I also believe it Rolando, because I am sure that with my mach1 GTOCP4 it worked. But how? There I do not understand, when I connect the USB cable to my PC the GTOCP5_Net_25 network which was displaye

#Mach2GTO

Hello, All this work by Roland and his team is great. I would have liked to have the keyboard at the same time as my Mach2 to test these routines from the start. But it does not matter because with th

Thanks George and Rolando, All software connections work well via virtual ports since I did the modeling and I use a mapping software without worries. What happens is when I turn on the mount and it i

#Mach2GTO

The question is how? I tried what I seem to have understood on the APCC manual ... but without success. When the connection port is a virtual port the impossibility to connect flashing is displayed. D

#Mach2GTO

Hello, I had a Mach1 GTOCP4 for 1 year and I used it in my observatory. I happened to use the WIFI connection to do positioning with Skysafari, but I did not if at the same time I had the USB / Serie

#Mach2GTO