Simpli no! Grüsse Konstantin v. Poschinger Hammerichstr. 5 22605 Hamburg 040/8805747 0171/1983476

I forgot to mention, that you should use the MGbox V2 ASCOM Local Server! https://www.astromi.ch/downloads/ Konstantin Konstantin v. Poschinger Hammerichstr. 5 22605 Hamburg 040/8805747 0171 1983476

Keypad-V5@ap-gto.groups.io Grüsse Konstantin v. Poschinger Hammerichstr. 5 22605 Hamburg 040/8805747 0171/1983476

Thats the PDF for the keypad 5. You can find it in the io usergroup for the keypad5. Grüsse Konstantin v. Poschinger Hammerichstr. 5 22605 Hamburg 040/8805747 0171/1983476

In the PDF: Recalibrate Recalibrate is used to correct the calibration of the mount if an object that you just slewed to does not appear in the center of the field. Recalibrate can be used even when t

Hi Roland, will the ortho setting also work with the new keypad software and a older not Mach2 Mount with a GTOCP4 box? Grüsse Konstantin v. Poschinger Hammerichstr. 5 22605 Hamburg 040/8805747 0171/1

#Mach2GTO #APCC #Keypad

Hi, APCC is asking for the Frimware VCP4-P02-08. where can I download it? Konstantin Von meinem iPhone gesendet_._,_._,_

Hi Brent, can you please explain in Steps, how you have done that please. Konstantin Konstantin v. Poschinger Hammerichstr. 5 22605 Hamburg 040/8805747 0171 1983476

Hi, I think there is a gap how APCC is using the Models. What is happening when you build up a whole sky model and then use later a Dec-Arc Model cause you have changed something on your Equipment. Ar

Hi, you can find here: Konstantin Konstantin v. Poschinger Hammerichstr. 5 22605 Hamburg 040/8805747 0171 1983476

#APCC

Hi, Put a counter weigt on the shaft. Tighten it and turn then using the counter weight. Grüsse Konstantin v. Poschinger Hammerichstr. 5 22605 Hamburg 040/8805747 0171/1983476

Hi Ray yes that make sense. Grüsse Konstantin Konstantin v. Poschinger Hammerichstr. 5 22605 Hamburg 040/8805747 0171/1983476

#APCC

Hi Roland, can you please tell me wich Firmware and software for the HP is the actual in the moment. I would like to use the new HP version with the modeling. But as I think it is still not ready. Grü

Hello, I told a while back, that I will post a image of the counter weight adapter, that I have made. With this part I have no more trouble to mount the shaft. The diameter is 25.54mm. On my AP1600 I

Hi, if you have trouble loosing the counter weight shaft, use a mounted counter weight and turn that till the shaft get loosened! Grüsse Konstantin Konstantin v. Poschinger Hammerichstr. 5 22605 Hambu

Hi, I would like to give the advice, that the new counter weight shaft is different to the old ones. The newer has a longer flat part bevore the thread beginns. So it is no problem to insert. Ihave de

Hi Marj, I drive to Nambia in the next Days and would be happy to test the new stuff ;-)) Grüsse Konstantin Konstantin v. Poschinger Hammerichstr. 5 22605 Hamburg 040/8805747 0171/1983476

Hi, yes, I would start with a three stripe Modell around the target. Grüsse Konstantin Konstantin v. Poschinger Hammerichstr. 5 22605 Hamburg 040/8805747 0171/1983476

Hi, if you can use only USB connections than have a look at the Ultimate Powerbox v2: https://pegasusastro.com/products/ultimate-powerbox-v2/ I use it and I think it is quite useful and reduce lots of

Hi, the Mach1 has no nylon clutch plugs! Grüsse Konstantin v. Poschinger Hammerichstr. 5 22605 Hamburg 040/8805747 0171/1983476