I rechecked all the wiring into CP4, into RA and DEC motors, the y box under the RA housing, and the silver connectors to the RA and DEC motors. They are all secure and still getting the Amber light.

#Absolute_Encoders

Roland/Mike, many thanks for your prompt replies!! I have a 1600GTO and 1100GTO with the later being my portable setup. Yes, the 1100GTO was setup recently. Roland I did connect the internal Dec wire

#Absolute_Encoders

On my CP4 I get a red light that then turns amber. In reading the literature there is mention of power and imbalance. Im using the correct voltage with the Powerwerx and removed all my scope from moun

#Absolute_Encoders

THIS WORKED! Many thanks for all your great help!!!!

#APCC

Here is the Zip file based on the selections you requested.

#APCC

Enclosed is a screen shot of APCC Park Screen and video of issue. Let me know if you need anything else.

#APCC

I will try this. I only shown the Telescope Setup to show settings to you. I don’t use at all.

#APCC

I do Unpark/Park from APCC. I just noticed this message comes up when I open Telescope Setup. Is there something I have setup incorrectly?

#APCC

The version of ASCOM driver I'm using is v5.50.03. In my settings I have UnPark from Last Position and Park set to Park 1. This is in the Telescope Setup too. I did delete the C:\ProgramData\Astro-Phy

#APCC

I uploaded with the latest version of APCC (v1.9.4.3) and every time I enter/exit software I'm getting an amber pop-up about Park 1 Position not being recognized. There is a check box to have the mess

#APCC

Sorry for not responding earlier. I had great success. I copied the data when the ephemeris is generated in its entirety. Also, you can do the “download results” and Select All (cntrl A) and Copy (cnt

#APCC

Ray, I did these steps and for some reason I'm getting the following error and cannot connect system. I followed the steps you provided, with my inputs below. When I selected the text, I'm highlightin

#APCC

This past Monday I was using Horizons and went to JPL Website to download Ephemeris. I did both the text file download and the data and the format looks a bit different. Note, the website looks differ

#APCC

Just today I was using Horizons and went to JPL Website to download Ephemeris. I did both the text file download and the data and the format looks a bit different. Note, the website looks different to

#APCC

Thanks Ray, I did do an uninstall and install and the same issue is presented. Note, the uninstall was just using windows uninstall process. If there is a specific uninstall process or other ideas I w

#ASCOM_V2_Driver

Running, I'm running into a problem with running APCC and get the error message about Virtual Port, image of issue enclosed. I tried running both Normal and as Administrator and issue persists. I work

#ASCOM_V2_Driver

I had a successful trial using APPM for the first time (just purchased software). I did a simple model first of 25 points; I did a small model first to understand how it works. Note, prior to this mod

#APCC

Ray, I did an experiment to understand the source of issue. When I run APCC and nothing else, including not having the ASCOM V2 I immediately get the -15.04056 vs the 4.48 in Tracking Correction. I do

#APCC

I did a 25 point Point Model Solve as I just purchased software (just got the software and doing a small model first). I was able to get Pointing to work effectively but the tracking is not working. W

#APCC

I have AP 1600GTO with PEM training running around +/- 0.74. I have a 14” Edge HD @f11 and imaging with STXL 11K and guiding with its SXTL filter wheel/guider. I use Maxim DL with 8/8 X/Y aggressivene