Sorry for not responding earlier. I had great success. I copied the data when the ephemeris is generated in its entirety. Also, you can do the “download results” and Select All (cntrl A) and Copy (cnt

#APCC

Hi John, I do not recommend using the ASCOM Device Hub with the AP V2 driver as the ASCOM device hub may not pass through some of the APCC-specific commands from APPM to APCC. -Ray

#APCC #ASCOM_V2_Driver

Greg, brilliant proposal!, thank you

#APCC #Mach2GTO

Thanks for the info Ray.

#APCC #Guiding

Brian, Thank you very much for the analysis. I'll definitely set the minimum star HFD to avoid guiding on hot pixels. I was on bin2 since when I first set up this image train several months ago I was

#APCC #Guiding

Tom, You are not alone in stumbling over that issue in selecting "Astro-Physics mount" instead of "Ascom mount" with TheSkyX. One of many not-so-obvious quirks in astrophotography. Lee

#APCC

Hi Brian, APPM can also use NINA, SGPro, SkyX, CCDSoftV5, and MaximDL to take images through their automation interfaces. -Ray

#APCC

Hi Alain, APCC executes Eltima's installer as part of the installation process, but has no control over the Eltima installation itself. I think the issue may be a conflict between the version of Eltim

#APCC

Hi, I had a quick search and couldn't find this issue but I'm happy to have it answered if you remember it has already been addressed. Background -- Successful sessions using SGPro to control Mach2 (V

#APCC #Mach2GTO

Thank you Dale Tom

#APCC

Hi Dale, Yes, with Ray's help it looks like things are sorted out and running as expected again. Thanks for posting your MF settings. Mine matched except for the use of "Use telescope side of pier" wh

#APCC

I have the same problem, no matter what combination of settings I use, APCC always reaches its meridian limit a couple of minutes before SGP, causing the SGP session to abort. I had a similar issue in

#APCC #ASCOM_V2_Driver

Tom, The setting you should configure is the Flip Offset, which moves the mount's flip point East of the meridian limit by the number of minutes you set. This gives the imaging application (SGPro) an

#APCC #ASCOM_V2_Driver

Ray and Howard, this suggestion did the trick! Thanks so much for your help. Best, Glenn

#APCC

Hi, just to let people know that Roland and Team (yes, with a capital T, they deserve it !) are kindly working with me in the background on this, which is why the thread has gone silent. Quadruple 'A'

#APCC

Hello, I've been trying to puzzle through setting up simple meridian flips with APCC, the ASCOM V2 driver, and Sequence Generator Pro. I know there is provision for Smart Meridian Flips by using the M

#APCC #ASCOM_V2_Driver

Just today I was using Horizons and went to JPL Website to download Ephemeris. I did both the text file download and the data and the format looks a bit different. Note, the website looks different to

#APCC

Hi Aaron, When the CP5 joins a network, the Access Point will be turned off because the Wi-Fi hardware does not have enough resources to support full functionality on both the Access Point and Station

#APCC

Hi Marcelo, Be careful not to confuse the crossing of the Meridian line with Meridian limits set in APCC. Flip Offset is relative to the Meridian limit, which could be minutes or hours after the cross

#APCC

Hi Roland, Yes that's what I thought, its is fine balanced. I remember with my old Losmandy mounts bias was usually better but I feel no backlash with these CP4 worms. That was one of the main reasons

#APCC