I experimented with Eltima quite a bit in the early CP4 days and was never able to get it to work reliably. Furthermore Eltima seemed to cause problems/conflicts with other programs on my system. My s

Way cool! -Christopher Erickson Observatory Engineer Summit Kinetics Waikoloa, Hawaii Virus-free. www.avg.com

I have seen nothing but troubles trying to use Eltima software with APCC. AFAIKT, the problems are on the Eltima side of things. -Christopher Erickson Observatory engineer Waikoloa, HI 96738 www.summi

Maybe elaborate on what you are asking? -Christopher Erickson Observatory engineer Waikoloa, HI 96738 www.summitkinetics.com

I would say that in just about every case of using two or more scopes on the same mount, everything hinges on what you want to accomplish and what suite of software exists that can do it. Usually a ve

If you are only running one at a time, having a NUC for each cam and OTA works fine. In fact I don't know of any capturing software that can handle two big cams at once and be able to handle automated

Personally if I were doing a dual scope setup on one mount I would put a NUC on top of each OTA and have two serial cords going down to the two serial ports on the CP3/4/5. SO MUCH EASIER to get the s

When I commented about possible comm buffer overflows, I was speaking from the perspective of an embedded (controller, microcontroller) programmer, not as a LAN/WAN administrator or IP wonk. Non-progr

(The following is a general comment and not intended as a specific reply to anyone on this thread.) One important and fundamental fact about troubleshooting Ethernet/WiFi/IP/TCP/UDP networking problem

Sounds like you really have it narrowed down to the CP4 firmware running in your controller. Work close with AP and I am confident they will get it resolved for you. Certain kinds of broadcast storms

My experience with TCP comes from 30 years of telecommunications and robotics engineering. My primary concerns are much more with Layer-1 of the OSI model (cables, connectors) and Layer-2 (Ethernet fr

If a person is going over 2m or so between the mount and the PC, I would avoid using the USB port on the CP4. -Christopher Erickson Observatory engineer Waikoloa, HI 96738 www.summitkinetics.com

If your PC doesn't have a native RS-232 serial port and you need to go 15' (or even 50') it would be much-better to combine a long serial cable with a short USB-to-Serial adapter at the PC. Serial can

TCP is more reliable than UDP if there are a bunch of lost packets on your network for some reason. Bad cable someplace, congestion, etc.In other words, TCP can hide a network problem that UDP does no

The G-11 isn't much lighter than the Mach1. And the Losmandy worm block + motor designs are better these days than days past, but still crap. The GM-8 combined with their Gemini-II isn't a bad solutio

I have been begging Roland for this for years. And I know for a fact that I have really annoyed him at times about it. LOL. My RST-135 plus CF tripod plus half-pier, counterweight, batts, hand control

I believe if you ask them, Linak will give you a list of their distributors. -Christopher Erickson Observatory engineer Waikoloa, HI 96738 www.summitkinetics.com

IIRC they sell through distributors. Contact them and ask. I have found the best deals on eBay. I set up an automated search and check out the new auctions as they are put up. -Christopher Erickson Ob

You are right! I misremembered the name. -Christopher Erickson Observatory engineer Waikoloa, HI 96738 www.summitkinetics.com

Lymax columns. A lot cheaper to buy Lymax off of Ebay or wherever and make your own telescoping pier. -Christopher Erickson Observatory engineer Waikoloa, HI 96738 www.summitkinetics.com