My version is from 2008. It has the latest battery configuration so it may be the latest version. How is the connection between the OLED display and the existing display connector handled? Is the phys

Very nice capture Alan. Nice round stars. Don Anderson

Chris Is the retrofit difficult to do and is it a one way trip only that is you can't go back to the original if one wishes? Don Anderson From: "'Christopher Erickson' christopher.k.erickson@...

Great production Suresh! What an adventure! Don Anderson

Geoff It could be that as the scope and mount moves the significant distance it would move during long sub exposures such as yours, either there is a mechanical shift somewhere in the system such as i

Good luck. Let me know how it works out for you. Merry Christmas Don Anderson

Charlie This might be what you are looking for. USB to Ethernet Converter | Network USB Hub - B&B Electronics USB to Ethernet Converter | Network USB Hub - B&B Electronics USB to Ethernet converters a

I think if you line the pier with plastic, that would to a large extent negate the effect of the sand on dampening vibration. I believe the sand would have to be in direct contact with the pier wall t

The concept sounds like it should work ok. Do you have a drawing to look at? Don Anderson

i did a similar thing this fall. I set up my rig (TV NP127is on a AP900 GOTO CP3) and then hung the keypad on one of the dovetail knobs. I imaged for a couple of hrs and noticed the keypad just before

I don't know the AP 600 but could the clutches be slipping? Don Anderson

Tom The intermittent tracking could be caused by a bad connection on one of the plugs on the cable or the plug in the mount. The fact that you said you "fiddled with the plug and it worked" suggests t

Steve One thing you could try is reverse the filters in the FW. Baader have suggested that where reflections are an issue say between the filter and the flattener. At least if you try that and you get

Steve It appears these doughnuts cover the entire image but are most visible in the bottom left due to Alnitak's brightness. It looks like the secondary support spider vanes are visible as well. To me

If it is still under warranty, If it was me, I would send it back and get it serviced. Don Anderson

Suresh It's hard to tell based on the information. Your best bet is to get hold of someone from the dealer. It is quite possible the collimation could have been thrown out or that the lens elements ha

The end justifies the means or is it the means justify the end? Don Anderson

Very nice Dr Suresh! I do see what looks like some internal reflections around the brighter stars. Overall though, a lot of detail in the image. Don Anderson From: "Suresh Mohan Neelmegh drsureshmohan

Glad you got it working. Don Don Anderson --------------------------------------------

Glad you got it working. Don Don Anderson --------------------------------------------