Hi Nick, If you install indi server https://www.cloudmakers.eu/windi/ on your Windows machine and connect the server to your mount, you will be able to connect Stellarium or KStar client from your Lin

You can use gently a razor blade... Yves

😅

Thank you Mike ! Regards, Yves Le 07/11/22 13:41, Mike Hanson <mikeh@...> a écrit : Yves, With the info you provided, I was able to re-create the issue. I also found via test that the ne

Ray, Just tested with my older CP3 v2 with another Windows 7 machine... Same behaviours with both controllers (CP3 v2 (Windows 7) and CP4 p02-13 (Windows 10)). "APCC gets a mount rate code from the mo

Hi Ray, Just inspected the APCC logs'. I found plenty of "Error, myPersonality, No response from mount". It seemed that my CP4 controller has lost its personality. :-) In reality, what is that mean? C

Ray, I really don't think that the personality of the controller has something to do here...same controller, same mount for years. Also latest CP4 firmware installed ( P02-13 ). Some button rate value

George, No swapped controllers here. This is related to APCC, it's a software problem not hardware. Same behaviour on two Windows 10 machines. Regards, Yves Le 04/11/22 16:09, George <george@astro-phy

Hi Ray, I found something unusual related to button rate drop box value... Many times in the past, when pressing a button rate, the mount slewed at 1200X even if it was set to 255X or lower. I never s

Hi Ray, A few years back, I was able to edit/verify the APCC/ASCOM driver Settings files with "DB Browser for SQLite" software. Is there another way, I can at least, verify what data values are in? Th

Hi Steve, I also got several ACP disconnections in the past even if I had a serial backup port. As you did, I will have to try disconnecting the ethernet cable to see if it's going to work with serial

...a year in Tuscany... Marj, did you take note? Regards, Yves Le 20/10/22 21:27, "Roland Christen via groups.io" <chris1011@...> a écrit : My Uncle and cousins grew up in Montreal, and

If it was in Montreal, Quebec, at least I would say you were speaking French a bit but probably not if you grew up in Ontario. ;-) Regards, Yves Le 20/10/22 21:05, "Roland Christen via groups.io" <chr

Alors Roland, Où avez-vous grandi ? ;-) Cordialement, Yves Le 20/10/22 20:54, "Roland Christen via groups.io" <chris1011@...> a écrit : French Canadian spelling? I grew up in Canada, so

Mini PC like MeLe Quieter2Q or 3Q (very tiny NUC) works great with full frame ZWO camera. Windows 10 or 11 already installed. You can event change the OS to Linux if you prefer. If you change your min

Put the whole shaft + insert a couple of hours into the freezer. After just heat the insert and you should be able to get parts apart. I recommend you to wear tick rubber glove to get the highest grip

#Mach2GTO

Hi Dan, You need to connect the power supply with the ASI6200 even if ZWO said it's only for controlling temperature. When trying to connect camera with a Raspberry pi, if the power supply is not conn

Roland, What about ZWO back focus specs? Depending if an OAG is used or not, the back focus can be 55mm or 56mm. Presently I'm using an ASI6200MM + EFW 2" and according to the ZWO chart diagram point

Hi Dale, It was probably the way I did. Thanks! Regards, Yves Le 23/07/22 15:31, Dale Ghent <daleg@...> a écrit : > On Jul 23, 2022, at 11:56, Yves Laroche <yves.laroche@...> wrote:

I've never used the ascom driver, always the native (I don't think dew heat control is available in ascom, right?), it's been there for ages. Linwood, In the ASCOM camera chooser, after selecting the