Hi Arun, I had asked the question for a passage CP3 towards CP4 which amounts to the same thing and I understood that it was necessary to recover on a PC the PEC with PEMPRo to reload it then. It inte

Thanks Rolando, And yes maybe, but it's C11HD with mirror blocking and normally it is blocked, but maybe not enough. With the AP130 I actually had less. On the other hand, I have not yet explained the

#Mach2GTO

Hi AP and Astronuts, I continue my search for objects with my C11HD and my QHY294c and to improve the tracking, readjust the polar alignment and redo the modeling (91 successful / 92). On a series of

#Mach2GTO

Hi Dean, Personally with a QHY294c (4/3 color) on the AP130 or the C11HD I have no problem to model with SGP / Platesolve2. I only take a 1/2 of the sensor on the AP130.

#APCC

Hi AP, Any news on the new keypad? Dominique

Hi Mike, Glad to hear this excellent news.. There are no shortage of questions on this forum and your expertise will be welcome. Dominique

Of course. I did not understand why the model which worked with my C11 on NGC6384 and exposures of 180s no longer worked for exposures of 60s on M10. I wanted to do M10 tonight and with its positionin

#APCC #Mach2GTO

Excellent Dean,my modeling with the C11 on 90 points worked very well for NGC6384 on 2 nights, then 2 days ago on M10 it was not working at all. So tonight I will certainly test your method by modelin

#APCC #Mach2GTO

Thanks Stuart, Greg, Rolando Correct polar alignment without more and APPM modeling 90 points, 48 West and 42 East. Dominique

#Mach2GTO

Hi, Here is a little feedback on the use of my Mach2. The modeling goes pretty well with SGP / Platesolve2. After photoshoots with the AP130GT, I switched to the C11HD with still use without autoguidi

#Mach2GTO

Same path for me too. Mach1 + APCC-Srd to Mach2 + Std. I had the APCC-Pro key just before the delivery of the mach2, I installed APCC-Pro with APCC-Std still installed. So I have the 2 installed ... w

#APCC #Mach2GTO

Thanks Rolando, I'm waiting for your advice as to when this will happen again.

Joe, I too had to clean a TV remote control with this problem. Thanks for the photo. There with the AP keypad I went there quiet. I'm not sure I have exceeded 95 °F (35 °C). It was not a thermal strip

Hi, It may only be part postponed,but if they were oily structures stuck on contacts and preventing the activation of the button, one could think that a dose of heat could thin the thing. So with the

Hi Joe, Thank you for the link to the related topic, actually the problem could be of this nature, since since 2011 I used this keypad in a common way and it has, depending on the period, lived betwee

Hi AP, The keypad (3388GTO) of my Mach1 dating a little (2011) I took advantage of the command of my Mach2 to take a battery to replace the original one. Everything went well and upon reignition I fou

Hi Rolando, It rolls for me quite like that. On June 14 I threw a photo spoiled by the clouds and I did not realize it until after. Without guidance no worries for the following takes ... and tonight

Hi Terri, I still have a doubt about this case that I had detected, because with my mach1 GTOCP4 that I had before I always had the keypad plugged in and I think that (Like the PC) was enough for Skys

Hi Terri, I noticed the same thing and I have already reported it, without the Mach2 connected to the PC (APCC and / or driver), with skysafari connected to the CP5 you can only move the mount with th

Me too, I would like to be able to have it, even if with the PC it goes perfectly well, because once the model is done it rolls by itself.His arrival with my stowaway's 92TCC will make him happy. And