|
Mach2 Update
So Christmas present or not?
So Christmas present or not?
|
By
Dominique Durand
· #67603
·
|
|
Mach2 Update
The simple Tracking Model is therefore very effective. If with the racket, we record many simple models all over the sky (10 for example), that we add the orthogonal compensation and that we make a fa
The simple Tracking Model is therefore very effective. If with the racket, we record many simple models all over the sky (10 for example), that we add the orthogonal compensation and that we make a fa
|
By
Dominique Durand
· #67724
·
|
|
Mach2 Update
Thank you Rolando, I would be with my Mach2 in permanent installation (the Mach1 which was installed there left in early November) and I have my first Mach1 for my observations elsewhere. I understood
Thank you Rolando, I would be with my Mach2 in permanent installation (the Mach1 which was installed there left in early November) and I have my first Mach1 for my observations elsewhere. I understood
|
By
Dominique Durand
· #67731
·
|
|
Unguided imaging with Mach2
15' is great. But It is indeed a test made with the simple model configured with the keypad?
15' is great. But It is indeed a test made with the simple model configured with the keypad?
|
By
Dominique Durand
· #67768
·
Edited
|
|
Unguided imaging with Mach2
I doubted a little, but nothing more. I realize how lucky I will soon be to be able to use this wonder.
I doubted a little, but nothing more. I realize how lucky I will soon be to be able to use this wonder.
|
By
Dominique Durand
· #67770
·
|
|
Mach2 Shipping?
I would love to test too ... in my home 😉
I would love to test too ... in my home 😉
|
By
Dominique Durand
· #67926
·
|
|
Upgrade to new keypad version (was RE: [ap-gto] Unguided imaging with Mach2)
#Keypad
My first Mach1 GTOCP3 and keypad are from 2011. I use a SkyFi3 to control the mount with Skysafari on my smartphone. I would like to be able to install the future V5 on the keypad and use these new fe
My first Mach1 GTOCP3 and keypad are from 2011. I use a SkyFi3 to control the mount with Skysafari on my smartphone. I would like to be able to install the future V5 on the keypad and use these new fe
|
By
Dominique Durand
· #67993
·
|
|
Upgrade to new keypad version (was RE: [ap-gto] Unguided imaging with Mach2)
#Keypad
Dale, So I misunderstood what George said "It may be a better decision to update the CP3 to a CP4". I have the ROM chip version Q and I thought maybe I should just replace it with version V. For the P
Dale, So I misunderstood what George said "It may be a better decision to update the CP3 to a CP4". I have the ROM chip version Q and I thought maybe I should just replace it with version V. For the P
|
By
Dominique Durand
· #68001
·
Edited
|
|
Upgrade to new keypad version (was RE: [ap-gto] Unguided imaging with Mach2)
#Keypad
George, PE and therefore PEC is linked to the frame and not to the box? I made in 2017 with PEMPRO a new measurement of PE on my mach1 and reloaded the resulting PEC on my GTOCP3 box. I still have the
George, PE and therefore PEC is linked to the frame and not to the box? I made in 2017 with PEMPRO a new measurement of PE on my mach1 and reloaded the resulting PEC on my GTOCP3 box. I still have the
|
By
Dominique Durand
· #68022
·
|
|
Upgrade to new keypad version (was RE: [ap-gto] Unguided imaging with Mach2)
#Keypad
George, Thanks I understood. The transition to GTOCP4 is not so easy as that I will think about, it twice and meanwhile, I hope very soon, do what is necessary to master my new Mach2. The powerbox V2
George, Thanks I understood. The transition to GTOCP4 is not so easy as that I will think about, it twice and meanwhile, I hope very soon, do what is necessary to master my new Mach2. The powerbox V2
|
By
Dominique Durand
· #68024
·
|
|
Upgrade to new keypad version (was RE: [ap-gto] Unguided imaging with Mach2)
#Keypad
Thanks Rolando, it surprised me a little that the new correction curve calculated in PEMPRO for my Mach1 could not be used by the CP4 .... After having mastered the mach2 I will therefore think about
Thanks Rolando, it surprised me a little that the new correction curve calculated in PEMPRO for my Mach1 could not be used by the CP4 .... After having mastered the mach2 I will therefore think about
|
By
Dominique Durand
· #68027
·
|
|
Upgrade to new keypad version (was RE: [ap-gto] Unguided imaging with Mach2)
#Keypad
Thanks Rolando, that's it.
Thanks Rolando, that's it.
|
By
Dominique Durand
· #68032
·
|
|
Evaluation of ASPPC-Pro for UN-guided imaging.
Mike, Personally, I think I understood that for mounts without encoders (APMach1, AP900, AP1200, ...) you have to put the PEM before doing the modeling (APPM) and then leave the PEM in function with t
Mike, Personally, I think I understood that for mounts without encoders (APMach1, AP900, AP1200, ...) you have to put the PEM before doing the modeling (APPM) and then leave the PEM in function with t
|
By
Dominique Durand
· #68061
·
|
|
Mach2 Update?
Roland, thank you for all these details, but as my seller told me this week that it should arrive in the coming days and that to read to you I have the impression that it may last a little longer, I h
Roland, thank you for all these details, but as my seller told me this week that it should arrive in the coming days and that to read to you I have the impression that it may last a little longer, I h
|
By
Dominique Durand
· #68145
·
|
|
: [ap-gto] Park 1
Ray, I had read somewhere that the Park5 was planned to replace the Park1 which was not always correct. but at the sight of the documentation I do not understand too much the interest of this park5 wh
Ray, I had read somewhere that the Park5 was planned to replace the Park1 which was not always correct. but at the sight of the documentation I do not understand too much the interest of this park5 wh
|
By
Dominique Durand
· #68147
·
|
|
: [ap-gto] Park 1
Roland, of course in the park1 is less reassuring from this point of view, ... personally when I switch on my mount and it leaves the park ... I'm not going to have dinner right away but I'm starting
Roland, of course in the park1 is less reassuring from this point of view, ... personally when I switch on my mount and it leaves the park ... I'm not going to have dinner right away but I'm starting
|
By
Dominique Durand
· #68168
·
|
|
Mach2 Update?
I wish I could already study the Mach2 manual, but where do we find it?
I wish I could already study the Mach2 manual, but where do we find it?
|
By
Dominique Durand
· #68404
·
|
|
Mach2 Update?
It is not yet available as far as I know ... since George is still working on it.
It is not yet available as far as I know ... since George is still working on it.
|
By
Dominique Durand
· #68407
·
|
|
Mach2 Update?
But yes George ..and then send the mounts ... we will manage since it seems that now everything is automatic. Regards Dominique
But yes George ..and then send the mounts ... we will manage since it seems that now everything is automatic. Regards Dominique
|
By
Dominique Durand
· #68413
·
Edited
|
|
Mach2 Update?
I'm willing to help too ... duck confit or "foie gras"?
I'm willing to help too ... duck confit or "foie gras"?
|
By
Dominique Durand
· #68438
·
|