Main window, under Program Operation. "Keep APCC on top"

Anytime sir. Merry Christmas!

Nice setup! I will be sure not to try this.

I promised Karen I would be nice... I think some of those folks there just dont get that there is a better place to ask questions about A-P gear. I tell folks all the time that I chat with Roland and

I work on Windows, but the security side of the platform, on a product only we use at this point. I am pleased though, to hear that your business that I adore so much runs on Windows.

Don't need them. We have a Death Star. 😋

Thought I would share this about a week after the article was published. Microsoft unleashes ‘Death Star’ on SolarWinds hackers in extraordinary response to breach - GeekWire There is a lot of talk on

I should also add that APCC movements are not affected by this change, so if you use the "buttons" in APCC to move the mount, they will work at the proper speed selected.

SN 4298 is new enough to use Keypad V5. It is not released yet though. You can install P02-08, but if you do the keypad button movement for 1200x is not accessible due to the change in the controller.

The QHY version of that 4/3 chip has some firmware issue with it at the moment. I have a ticket open with QHY to hopefully aid in getting it resolved.

#APCC #Mach2GTO

[cid:bab156b1-f0ea-4532-9ae7-3ec5e33754fb] ________________________________ Sent: Tuesday, December 22, 2020 9:57 PM To: main@ap-gto.groups.io <main@ap-gto.groups.io> Subject: [ap-gto] Meridian Flip F

When you connect to APCC you can look at the top of the window and see the firmware version on the right side.

That is slated to appear in mid Jan 2021.

#APCC #Mach2GTO

For some reason, my posts never go through this late at night. See the circled bit in this image below. Flip Mount button in APCC. Pro not required.

Very unlikely, but possible.

#APCC

Not all of them are bad. It is a game of camera roulette which I don't seem to win very often. 😉 The Gerd CTU is the right way to go, the built in "tilt plate" from ZWO is not very good at all. Your c

They canned CosMos due to Covid19 then when they announced their imx455 camera the name changed to Apx60. https://www.atik-cameras.com/product/apx60/

Their OAG (QHY OAG-M) bolts directly to their CFW3 series wheel. Small prism on it (8mm x 8mm) but good enough for a Lodestar x2 chip.

7 position 50mm wheel?

On my ASI6200 it was so severe that I had one triad of the Gerd Neumann CTU maxed out and still didn't have enough to fix that portion of the chip. In my book that is way too much tilt and looks more