I upgraded APCC Pro, since it was telling me to. I did not upgrade the firmware in the CP4, since this can be tricky business and I avoid unless necessary. Now I cannot connect to the mount because th

#APCC

Just made the settings and tried it out. Problem seems to be solved. Thanks much Ray !! Now, can you clear the clouds? 😊

#APCC

Ah, OK. I'll make these changes soon, but of course I may have to wait for the weather to clear. Might have a couple of clear spots tonight before I take in the OTA - storm 'Delta' is heading our way

#APCC

A couple of additional changes that you should make: 1. If you want to ensure a counterweight-up position to the east of the meridian, you will need to update your meridian limits, so that the East an

#APCC

Nevermind, I see your screenshot in your earlier posts shows that the "Override ASCOM" checkbox is not enabled. If it is not enabled, the ASCOM driver's meridian delay can override the meridian delay

#APCC

So, are you saying if you do nothing else but slew twice to Jupiter using Stellarium, the first slew results in a counterweight-up position, and the second slew causes a pier flip? The mount's "flip p

#APCC

My telescope is remotely controlled from my house to the outside property via a 100ft LAN cable. So I use Stellarium/Stellarium Scope for my pointing/slewing. The safe zone was created using APCC.

#APCC

1. How did you slew to Jupiter? By using the A-P hand controller? Or, through software? 2. If using software, what software? 3. How did you set the "safe zone" (meridian delay) Via Keypad, AP V2 drive

#APCC

I am using a pointing model. Just a few minutes ago I ran a quick slew and reslew to see if I could recreate the problem. Here is what I did: 1) From the Park 4 position, powered up and slewed to Jupi

#APCC

Disregard, found Howards comments regarding ASCOM platform 6.5. Thought I was losing my mind. Mike

#APCC #ASCOM_V2_Driver

Hello, I am experiencing an issue with plate solving in the APCC APPM tool that I can't seem to track down. As an example. If I slew the scope to Sculptor galaxy and take an image, the galaxy is very

#APCC #ASCOM_V2_Driver

Hi Dale, The driver does cache many of the commands. However, what can slow the driver down is formatting the text and writing to the log file, especially on devices with slow disk write speeds. That

#APCC

As another data point in this vein, we set NINA to poll drivers every 2 seconds by default. We found that some older hardware and/or their drivers have a tough time dealing with more frequent polling;

#APCC

Thanks. I had it set to 500msec but will set it to 2 seconds and see if that makes a difference. Roland

#APCC

Hi Roland, > One thing you can do is to open the log file in APCC or the ASCOM driver and look to see what SkyX is doing at > startup. On mine I always see multiple errors with the above situation. So

#APCC

I have seen something similar with my SkyX on my laptop. If I have a Java app running on the laptop then SkyX will not operate correctly. It connects ok, shows "Tracking at Sidereal", but will not sle

#APCC

Hi Robert, I use SkyX with APCC Pro on my 1200 and 1100AE mounts. SkyX does not have any problems slewing to targets, so it's something in your setup that is misconfigured. 1. Are you connecting SkyX

#APCC

For those that use a FocusLynx focuser, Jeff informed me the temperature gathered by the hub for focus compensation is available through ASCOM and can be used by APCC-APPM.

#Mach2GTO #APCC

Great, glad it works for you. If you didn't have an internet connection, I have a small and easy Arduino-based electronics project and ASCOM driver that can add an air pressure sensor to any setup. /d

#Mach2GTO #APCC

Hello, I have a problem that I am wondering if others have run into this. I have an AP 1200Gto mount upgraded to GTOCP4 and I control it with APCC Pro. My desktop computer (32 gb of ram) has Windows 1

#APCC