A special nod goes out to the AP1100AE. I got about 50 hours of data on this, including 7 remote, and not one sub needed to be discarded due to eccentricity or trailing (a LOT of subs were discarded d

Hello Fabien I have just finished some testing with my CP3 and ASIAir, here is some feedback >>>I cannot connect my mount with the AstroPhysics CP3/4 protocole offered by ASIAIR Plus : why? I can conn

#asi_air_plus

Thanks everyone for the confirmation. Last night the model did work very well after the collimation. Though today I had to take apart the entire tube to adjust the primary retaining ring due to some m

>>>If you move the secondary then stars will move on the sensor so your positioning will be off by a very small number of pixels. It is unlikely to affect guiding or tracking since those corrections h

If you move the secondary then stars will move on the sensor so your positioning will be off by a very small number of pixels. It is unlikely to affect guiding or tracking since those corrections hard

Dear All, due to personal reasons, I have decided to put up for sale my AP 155EDT f/9 -- the very best of all the very many 6" refractors that have passed through my hands (AP, TMB, Zeiss, Takahashi,

Hello, my name is Fabien from France, 2 questions : - First : I tried to connect for the first time my AP900 GTO CP3 mount to my new (updated) AsiAir Plus box. The firmware version of my CP3 is also u

#asi_air_plus

Hi Tom I can't speak for your comparative 1200 question, but in the big picture a 380ms backlash is small and easily handled in PHD2 with auto backlash compensation feature. By comparison you start ge

Last year I acquired an older AP1200 CP3 mount, and upgraded it with the V2 chip to V4.19.3 Yesterday with moderate seeing, I ran the PHD2 guiding assistant and found out that the mount has approximat

I run my PC and keypad on UT so I don't have to worry about daylight saving time changes. A-P has a document describing setting this up: Daylight Savings Change in Keypads. Richard

Hi Roland, did you see the Tilter M68 from Baader? Grüsse Konstantin Konstantin v. Poschinger Hammerichstr. 5 22605 Hamburg 040/8805747 0171/1983476

Thanks Brian- I responded to a later post in the thread but thought better of it if I responded to the original post. -Best, Robert

Thanks for the A-P mount vignette. There must be more A-P mounts per square foot installed there than anywhere else in the world. -Best, Robert

👍 Brian

Well, it sounds like I have been doing this all wrong. I normally run my mount off APCC with the keypad set to EXT, but for the past two time changes I have been starting up the mount without connecti

Mega dittos on the Astro-Physics tilt adapter ! Where's the sign-up sheet ? Mike

Awesome photo! Thanks for sharing :)

Yes, I hear you. I want one also that is intuitive. Roland

If you don't remove the scope then you should be ok with the model that you have. Rolando

Hi Terri, I know you had trouble originally with the internal USB 3 extension inside the Mach2, for downloading images from your ZWO 6200MM camera. Is that issue resolved for you? I have used both 12