Slew and Button or just Slew? I only get to select slew at 1800 at 24V. Button is limited to 1200.

Better than $1000! You have the USB2 version so you’ve probably already figured out the connection idiosyncrasies.

Marj, I really should proof read what I type before I hit send. Atrocious. This is likely just my misunderstanding of how the slew rates work. There is a Slew Rate setting in both APCC and the Hand co

At the risk of getting verbally abused here in case I missed it in the documentation... Why doesn't APCC-PRO or the V5 hand controller show a slew speed 1800 option when connected to a 24V source? In

Mike, that $999 seller has 2 available and accepts offers. Make an offer. They worst he/she can say is "no," or counter offer. It was a different seller, but they accepted $475 for mine shipped.

Howdy Mike, I also use the 3104. I’ve only had it for a little while, but I can tell you they do run quite warm. The Rex more than the Lex (it draws more current). I haven’t had them through a winter

Just a different possible solution. I was just able to pick up an ICRON Ranger 3104 for a good price. It works fantastically over 100’ of cat6 and is rated for ~300’. It took some troubleshooting to g

Luca, Your goals are also very much my own. This is precisely the info I was hoping for from someone experienced using APCC in this manner. You are a Rockstar for taking the time to produce these exam

#APCC

Howdy Brian, Thanks for your comments. Meridian flip hasn't been the primary discussion. As I've reported, I have been using that config with the default settings in SGP since I got my Mach2 back in J

#APCC

Ray, I don't actually have an opinion on the matter. I was just trying to get clarity. Before I continue, I want to thank you for being as attentive as you A-P guys and gals are here at these group.io

Geof, I imagine you're right. It must be that APCC analyzes the meridian limit data recorded by the user, then somehow sets the delay +/- as you indicated in your examples. It just isn't obvious to me

#APCC

Thank you Geof, Your information was still valuable and provided insight into concepts I had wrong. With APCC (versus APV2) it appears that once one set the meridian limits and activates them (see my

#APCC

For completeness, here is the screenshot from the APCC instructions regarding "dynamic meridian delay:"

#APCC

Actually, it isn't the same as APV2. I just re-read the APCC instructions, and this is where I found not to touch the APCC Meridian Delay Settings when the meridian limits are active (see below). The

#APCC

Geof, This was a "lightbulb" statement, and it makes perfect sense. I incorrectly made the assumption that setting up the meridian limits in APCC would negate the need to alter the auto-populated meri

#APCC

This is a continuation of a pair of other ap-gto-groups chats regarding using APCC CW up within the East Limits slews with SGPro. Please, ANYONE with experience with APCC and SGP chime in here. I didn

#APCC

Ok... If I didn't know better I would think this was double talk, but I'm sure this must be a miscommunication. Here is the problem I'm having Ray: 1. A few weeks ago you and I had a discussion in thi

And the sycophants out there (Dean) who troll and "like" replies are not only rude and unhelpful, but frankly disruptive. Unbelievable. God forbid a person who forks out $14k for a mount and accessori

Ray, This is such a bizarre conversation. Perhaps you guys are too close to the problem, perhaps I don't understand how A-P meridian delay works, or both. Here is what you had to say on the matter in

Ray, Two thumbs up. But it still begs the question what the right SGP meridian settings are. It gives me pause to blindly trust how wells APCC "CW up in the East Limits" plays with SGP when nobody, in