Hi Joel, How? Do I need a special ethernet cable? Thanks

I was trying to configure my CP4 for wifi and some how I disabled wifi altogether. When I started I was able to see the CP4 in my available networks, but no longer. I tried connecting using 172.31.0.1

Hi Marj, Is the upgrade more than just the motor box? If we wish to have the new motor gearbox retro-fitted on a Mach I, 1100, or 1600, can we just send the motors to AP, rather then sending the whole

Here in central Texas we don't have too many evenings where dew is an issue, but when conditions are such that dew is a problem, my mount has always been dry using the Telegizmo cover. I have my Mach

I use SGP with my Mach 1. I don't mind flipping because SGP handles the whole process in about 5 minutes.

I forgot about PHD. Free is good. Dave

Andrew, Pempro would allow you to easily polar align your mount when you only have a view of the southern sky. Dave

Excellent! Now we just need to know what they are :^)

Rolando, When will the retrofittable improvements be available for the Mach 1? Dave

Rolando, Thank you for the detailed response. I should mention again that this situation only occurred once, and I have had many successful nights imaging since, without so much as a hiccup. For this

Hi Carlos, Did you turn the sync -> recal checkbox back on after the original sync? I'm not sure CdC sends the location and time, but I think APCC does. I'll have to check the manual. Thanks! Dave

Hi Don, Stuart is trying to help me figure out the issue. I should mention that it only happened once and I didn't change any software settings prior to the slew in the wrong direction. I do have the

Stuart, That may be the issue. I usually start imaging in the east, but I had a few hours before the target was high enough to see so I started collecting frames on another target west of the meridian

Hi Stuart, I made that mistake early on when I first got the mount. I now make sure that the time displayed in the APCC status window it correct when I start up. I think I am just not understanding th

The other night I tried to slew my mount to my imaging target and the mount unexpectedly went the wrong way. Nothing happened as I was there to stop the slew, but I would like to understand why. The d

I fixed it with some help from How to solve COM Exception Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG))? How to solve COM Exception Class not registered (Except... Wh

Is the same true for the Mach 1?

I am setting up a new computer with Win 10 and I am getting an error when I try to create a virtual port in APCC. The error is: Error creating virtual port 1 control: Class not registered (Exception f

Thanks, Ray. Are there plans to implement some sort of recalibration in APCC for people who are mobile or semi-permanent? ​​

My Mach 1 is on a permanent pier, but I have to remove the OTA/camera if the weather is bad. If I create a model in APCC pro is there a way to reuse the model when I reattach the OTA/camera, or do I h