Hi Joseph, You must rename the extension .foo to .exe Yves

Hi Jim and all, The AP ASCOM driver don't double park at all if I well understand what you wrote. The first park command is issued by ACP park command and the second one is performed by ACP park comma

Hi Ajai, Was the tracking turned off before parking in all your previous driver versions? If yes, how do you explain that the RA motor begins to track after the slew completion in RA until the DEC rea

Hi Ajai, Roland and others, Ajai, I reported to you that the RA motor continue to run after slew completion (both axes) not during the time DEC still going to its parked position. Anyway, your solutio

Hi Jrgen, Which version of the latest chip (GTOCP3) is installed? Version "G" or another? Yves Jrgen Wolf wrote:

test

Hi Jürgen, Which chip version in your GTOCP3 is installed? Version "G" or another? Thanks, Yves end of

Hi Jrgen, Try in setting PEM to OFF and RA backlash compensation to zero. There was a bug in chip version "G" but maybe something else with version "I". Let me your results. Thanks, Yves Jrgen Wolf wr

Hi Ajai, Since one year, it was a great pleasure to work with you. I will never forget. Merci beaucoup, Yves Ajai Sehgal wrote:

Hi Jeff, In using MaxIm, AP ASCOM driver will control your mount. Please check the RA backlash setting in the ASCOM driver menu. The value should be 00 00 00 and not 00 00 15 (15 sec of time; 225 arcs

Hi Barbara, What kind of telescope do you have? Refractor, SCT or other? If SCT so your pointing problem maybe cause by a mirror flip. This mirror flip is unpredictable so impossible to be corrected b

Hi Dale, You have to update your keypad's firmare to version 4.20 beta. Yves

Hi Rob, One thing for sure is that you cannot downgrade to version 4.12 the same way as version 4.20. The main reason is because version 4.20 has updated the objects database and this new database is

Sorry for the link. Click on the next link to download the AP database loader. http://minilien.com/?Zv4CY0BDXS Yves

Rob, Next time, when your keypad will freeze, unplugged the keypad's cable from the controller, wait 30 seconds and reconnect it. Now, just the keypad will boot-up (not the controller). After, try an

Hi, Do you have a GTOCP3 controller with the latest firmware? If yes, you may try to use AP protocol commands (only if you are familiar with it) to set the slew rate below 600X. The variable slew rate

Hi William, You wrote "If I power cycle the mount, not the power supply the mount will work correctly." It seems that initially you put your power supply ON when your mount is already connected to it.

Hi Keith, Sorry if I was not very clear. I never said that the user must wait 30 seconds after powering on the power supply to powering on the mount. The 30 seconds waiting time is for applying the po

Hi Jerald, On my side, I've experimented serial timeout issue with my 1200GTO mount when using my edgeport/8 with my TCF-S in Automode A or B. The problem seemed to happend when I was using MaxImDL wi

Hi Ajai, I've got plenty of synchronization problem last summer until i decided to uncheck the Use Horizon Check feature in your driver. I was able to slew to objects when they were on the same meridi