Hi Rick When you load your model onto the new computer do you solve and recal?

Hi Mike i use MGBox v2 for my CP4, which has a lot of other features including GPS https://www.astromi.ch/product/mgbox-v2/ Another option i use is for a windows computer - i picked up a USB GPS and u

spot on - in fact it's a known "feature" for hp laptops, fix described here (bios setting) https://h30434.www3.hp.com/t5/Notebook-Wireless-and-Networking/Wi-Fi-turns-off-when-connected-with-Ethernet/t

>>> I may be wrong but I believe you should be using single star instead of multi star when running GA. GA automatically disables guide output so no need to set MinMo to 20.0. FYI Guiding Assistant on

#Guiding

>>>I'm not sure what the number of the Min Move in PHD actually is. It's dimensionless, so it could be P-P, RMS, arc seconds, inches, miles, parsecs, degrees centigrade, etc. Min move in PHD is expres

Nicholas >>> In any case Steve you point out for longer GA. I understand, 20 minutes at least for worm cycles. for determining min move, you only want a couple minutes You can use a longer GA run (20+

Hi Brent I purchased a copy - this is really interesting Do you have any tutorials or guides on how to test the system in preparation for a transit? ISS transit is coming up for me Sunday

#Mach2GTO

>>>3600/266 yields 13arc seconds per hair. a 13 arcsec error would cause hair to ignite and telescope operators to take up pitch forks. These are tiny tiny movements. that "giant dec leap" seen in the

>>> It is the standard finder bracket included with the Explore Scientific telescope. can you upload a pic? If it's what I think it is, that can be (and often is) a huge source of movement. Remember w

Hi Nicholas I'm a little confused/concerned about these large and fairly instant jumps in DEC I see it happened a couple of times. I don't see it affecting RA, so it looks to me like something is loos

Alex - were you guiding during this period, and if so can you provide the guidelog from that night? I"m wondering if somehow it may have locked on to a different star, or something happened during dit

Sorry i'm a bit late to some of these comments >>>>Another very important thing to know about PHD2: If you manually rotate the camera after you calibrate PHD2 you need to calibrate it again. If you ha

>>>If I look at this output from PHD2 Guiding Assistant, are you saying that my P-P Arc Seconds is the Declination, Peak of 0.73 px (1.44 arc sec)? Yes, but p-p can be (and probably is) misleading. if

#Guiding

it's possible though this run reported no prior calibration issues - the calibration data prior to this wasn't in this guidelog. It looks like maybe the guidescope slipped and/or was rotated when the

I found an earlier run that looks better - and by "better" i mean relatively better than previous. At least this one kind of makes some sense: The previous run was unguided data There were significant

Here's the picture from those logs - unguided output with 2 second exposures, approx 20 minutes total time

Hi Andrew I appreciate the struggle! There are a lot of things to know and learn and understand how they relate to each other. You may also get a lot of conflicting advice on how to go about understan

#Guiding

>>>No, silver is on the inside. I have been using Telegizmos 365 tarps for many years. Tony has it correct. Not only that, but a while ago I decided I was smarter than the instructions, and put the re

Hi Andrew In general it looks good, but I think the main limiter for you is your min move is set too high. You are achieving about 0.5" RMS with DEC and RA nearly identical, and it turns out your min

#Guiding

Hi Andrew can you please upload your guidelog for that session. I assume you followed the baseline guiding steps? screen captures are interesting but aren't helpful for analysis

#Guiding