Wolfgang (and Bill), I agree with Don, the calibration time is too short. BUT, as Rolando already pointed out, one reason you'll have the symptom you both describe is if you have the "Reverse X on Fli

Bill, no fun being down that long! Glad you've got it sorted out. Nice shot btw! Stuart

Wolfgang, my immediate question would be: How much do you have to move the scope? If exactly 15 degrees then I would vote that your DST setting is incorrect or you have the wrong timezone offset. Stua

Tough looking target! Nicely done Alan! Stuart

Mike, that sounds odd. Scott Hammonds posted a video of cleaning and remeshing the gears on his 1200 GTO CP3. I'd look at that. Stuart

The advice I usually see is to loosen the clutches. Hold the scope and send the mount to a known park position. Then manually put the scope in that same position, tighten the clutches, resume from tha

Terry, less data or not, I think it turned out really nicely! Stuart

Dan, I mean in the ASCOM application where you indicate that you're guiding with relays or whatever. One of the choices should be PulseGuide which will not require the cable. Stuart

Is PulseGuide an option for you? That should allow you to lose the cable. Stuart

My experience is similar to those saying not to worry. I routinely ran my old laptop down to -20C and below without problem. The secret is not to shut it down and let it get super cold. If it is runni

I missed these - I agree, excellent job! Stuart

Surely it says 1x not 1 sec so it is the same as setting it to sidereal? Stuart

Joe, my guess is that nothing is going to stop the light down enough to use a ccd camera in daylight. Nothing short of an h-alpha filter for viewing the sun in which case my guess is you won't see any

Steve, that active X message is often a sign that you've not run the program once in Admin mode to register all components. But it is a guess. Stuart

Dean, I ran my AP900GTO CP2 with TSX and used the ASCOM v2 driver per advice from the gang at AP. I had NO problem using Pulseguide to guide without a cable. It all worked very well. Stuart

Andrew, I have a Pelican case for my CW's that works nicely. Stuart

Exceptional shot Joel! The older shot is the mirror reversed (am sure you knew that). Stuart

Smartly done Anthony! Stuart

Joe, Kent, ... I just wanted to report that as of now I have had a LAN connection of TV 11 running from a 32-bit W7 machine to a 32-bit XP Home machine for about 3 days without interruption. Weird. St

Kent, not doubting you but at least in my case, all versions of TV have had the periodic disconnect for me and my use. Stuart