Thanks Dale. Confirmed running the latest CP4 firmware. UDP is certainly rock solid. As an experiment, this morning I decided to run ASCOM (no APCC) and connecting over IP direct to the mount (vs. RES

#WiFi

Hi Tom, No, the Mount doesn’t need to be initialized. I was out with my 1100 with CP4 last night. I hadn’t used it for a while and had the same problem as you, SkySafari wouldn’t connect with my iPad.

#WiFi

I have used a Silex USB to ethernet server in the past for this purpose. I used a USB to serial adapter to connect to the mount. The silex seems to be fine for this purpose. It would even allow my STL

#WiFi

No problem. I ran into a similar issue at my recent Hawaii outing. My WiFi would not connect. I knew it wasn't the WiFi that was not working, i knew instead that my brain wasn't. After configuring my

#WiFi

Hi Alex, Do you have a "#" sign, "$" sign or a ":" in your main password? The pound sign absolutely cannot work because it is the terminator for all AP commands. In other words, if your password is: 1

#WiFi

Hi, 130FeetDeep, It is safe to say that SkySafari 6 Pro and Plus work properly with the Mach2 and the CP5 (given my setup) but certain conditions can create WiFi drop outs. However, I found no fault w

#Mach2GTO #WiFi

Howard, Think this issue is for Android devices only. It sounds like those with I phones or I tablets don't have the issue. I will try the channel suggestion but I am pretty sure I already tried that

#WiFi