Date   

RAPAS App

Charles Thompson
 

From time to time I see someone mention the RAPAS phone app. I have looked in the app store and have never found it. Is it only in the Apple store? I'm looking for the Android version of it exists. Any help would be appreciated. 



Thanks,
Charles




Re: APCC rate settings

Ray Gralak
 

Hi Cytan,

I got the dump. Yes, IPV4 is enabled.

So something must be blocking the transfer, but I don't know what that could be. There are no hits from your IP address and no errors in the server's error log.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via Groups.Io
Sent: Friday, March 20, 2020 8:01 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] APCC rate settings

I just sent the info to Ray.

cytan

On Friday, March 20, 2020, 09:56:54 PM CDT, Bill Long <bill@outlook.com> wrote:


Open CMD.exe and run this:

ipconfig /all

Then paste in the results into an email to Ray directly.

________________________________

From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Cheng-Yang Tan via Groups.Io
<cytan299=yahoo.com@groups.io>
Sent: Friday, March 20, 2020 7:54 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] APCC rate settings

Hi Ray,
You mean whether IPV4 is enabled on my cable modem? I'm actually not sure. I logged into it nowhere does it
explicitly say IPv4, but do see internet addresses that look like IPv4 for the modem. There is a tab for IPv6.

Windows10 is at latest service pack and everything is up to date.

cytan

On Friday, March 20, 2020, 09:45:20 PM CDT, Ray Gralak <groups3@gralak.com> wrote:


Brian and cytan,

1. I am wondering if you have IPV4 enabled on your LAN port?

2. Have you applied all Windows updates and especially all optional updates having to do with .Net framework?

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-
pro&data=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%
7C1%7C0%7C637203560606019629&sdata=lBKk8%2BSEFz%2BCe9KEq8tzImXJWqFfTI9CgIjwNSlIqE4%3D&r
eserved=0>
Author of PEMPro V3: https://www.ccdware.com
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01
%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
03560606029634&sdata=3iervM1WtC4d6dsFZT7xv6YqfUfOKTK9QB64dwY3oSc%3D&reserved=0>
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&dat
a=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7
C0%7C637203560606029634&sdata=2ivRISzWZErLusFe7buaD5Mxu1Sv%2B8vhyfSS2eru2uE%3D&reserved=
0>


-----Original Message-----
From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> [mailto:main@ap-gto.groups.io] On Behalf Of
Brian Valente
Sent: Friday, March 20, 2020 7:27 PM
To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>
Subject: Re: [ap-gto] APCC rate settings

fwiw mine reported no updates either, but i'm not too worried about it. i'll watch for updates here

On Fri, Mar 20, 2020 at 6:58 PM Cheng-Yang Tan via Groups.Io <cytan299=yahoo.com@groups.io> wrote:


Hi Ray,
I added APCC to the firewall but the problem remains:
Inline image

cytan



On Friday, March 20, 2020, 08:49:09 PM CDT, Ray Gralak <groups3@gralak.com> wrote:


> I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?

AstroPhysicsCommandCenter.exe

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-
pro&data=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%
7C1%7C0%7C637203560606039648&sdata=aM%2FZfeF17TAQzpkbaUP3fLmHdJnBb6nKO2BIYfJn3Qs%3D&r
eserved=0>
Author of PEMPro V3: https://www.ccdware.com
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01
%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
03560606039648&sdata=tp2vS%2FlsqpS%2B4J18VxFiTkkoDTdTRSS2ucqXyP%2Br%2Bsg%3D&reserved=0>
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&dat
a=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7
C0%7C637203560606049652&sdata=TiIeta1020YGk8DiTDm4Cwtga1Ifo%2BUs6%2B%2BdU%2BuETNQ%3D&r
eserved=0>


> -----Original Message-----
> From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> [mailto:main@ap-gto.groups.io] On Behalf
Of Cheng-Yang Tan via
Groups.Io
> Sent: Friday, March 20, 2020 10:55 AM
> To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>
> Subject: Re: [ap-gto] APCC rate settings
>
> Hi Ray,
> Sorry for being dumber than rocks when it comes to Windows stuff. I'm more of a dumber than rocks
Mac user :)
> Here's the screen shot for the firewall settings on my Win 10:
>
> Inline image
>
> I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?
>
> cytan
>
>
>
> On Friday, March 20, 2020, 12:49:39 PM CDT, Ray Gralak <groups3@gralak.com> wrote:
>
>
> Windows Defender Firewall can block applications. Without realizing the impact you might have clicked
yes to a
> prompt that disabled APCC from being able to access the web. There is not much else that could prevent
APCC
> from doing a simple HTML request. I guess maybe it could be that you need to update windows or haven't
updated
> an optional update related to .Net framework.
>
> -Ray Gralak
> Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-
pro&data=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%
7C1%7C0%7C637203560606049652&sdata=Qfzz44eu%2Bsqy7t3zIwvoV%2Ffd%2Fij2fHTbgRzt2ryanJE%3D&r
eserved=0>
> Author of PEMPro V3: https://www.ccdware.com
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01
%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
03560606059657&sdata=1izWYSNBYIO5Yxaud1eZhDelwCeCg8WN2tuvpcp9bqI%3D&reserved=0>
> Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&dat
a=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7
C0%7C637203560606059657&sdata=xUoFELfEqy19cU8i4NJ1h0TBuW5IRqv0%2BJRnuEE4fp0%3D&reserved
=0>
>
>
> > -----Original Message-----
> > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> [mailto:main@ap-gto.groups.io] On Behalf
Of Cheng-Yang Tan via
Groups.Io
> > Sent: Friday, March 20, 2020 10:37 AM
> > To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>
> > Subject: Re: [ap-gto] APCC rate settings
> >
> > Hi Ray
> > I don't have any purchased AV on my Win10. Unless you mean whatever AV that comes standard on
Win10?
> >
> > cytan
> >
> > On Friday, March 20, 2020, 12:33:02 PM CDT, Ray Gralak <groups3@gralak.com> wrote:
> >
> >
> > Okay, then maybe your anti-virus application is blocking APCC from sending anything off your
computer.
> >
> > Try turning AV off then try again.
> >
> > -Ray Gralak
> > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-
pro&data=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%
7C1%7C0%7C637203560606069666&sdata=FTZM1Lc%2FB1RIVwozaPxqWiy8aIN%2B675utSAoeMOjN8U%3D
&reserved=0>
> > Author of PEMPro V3: https://www.ccdware.com
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01
%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
03560606069666&sdata=OBvNom9tDLeuraPdX7fp3IBYpYU2lb3CA3G6uBiZCVk%3D&reserved=0>
> > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&dat
a=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7
C0%7C637203560606079671&sdata=6zOWLTccnKDQSYgebTLcV%2FYz51A0Jq2b5%2FPnxmUwxWU%3D&re
served=0>
> >
> >
> > > -----Original Message-----
> > > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> [mailto:main@ap-gto.groups.io] On
Behalf Of Cheng-Yang Tan via
Groups.Io
> > > Sent: Friday, March 20, 2020 9:45 AM
> > > To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>
> > > Subject: Re: [ap-gto] APCC rate settings
> > >
> > > Hi Ray
> > > I can see https://www.siriusimaging.com, <https://www.siriusimaging.com,>
<https://www.siriusimaging.com,>
<https://www.siriusimaging.com,>
> <https://www.siriusimaging.com,> but 1.8.0.4 does not see the
> > update.
> > >
> > > cytan
> > >
> > > On Friday, March 20, 2020, 11:27:28 AM CDT, Ray Gralak <groups3@gralak.com> wrote:
> > >
> > >
> > > No connection is required.
> > >
> > > You're computer/browser must be able to access https://www.siriusimaging.com.
> > >
> > > -Ray Gralak
> > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-
pro&data=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%
7C1%7C0%7C637203560606079671&sdata=6WHu4aBMxXmVFe1N1Mu0nh1IDjbOrp3idN2wuQPhIuA%3D&res
erved=0>
> > > Author of PEMPro V3: https://www.ccdware.com
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01
%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
03560606089680&sdata=wB1HeuAfvnYU%2FmZ%2BCedOJ7sZO2e3gBoZTvc3fbORmUU%3D&reserved=0>
> > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&dat
a=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7
C0%7C637203560606089680&sdata=GTbqu1ZEnHo76FVsMV07GTDXNihy0K7Z37zYoxFPYvM%3D&reserved
=0>
> > >
> > >
> > > > -----Original Message-----
> > > > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> [mailto:main@ap-gto.groups.io] On
Behalf Of Konstantin von
> > > > Sent: Friday, March 20, 2020 8:16 AM
> > > > To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>
> > > > Subject: Re: [ap-gto] APCC rate settings
> > > >
> > > > Hi Ray,
> > > >
> > > > I ran APCC Pro 1.8.0.5. When I check for updates I get the answer No updates to APCC are
available. Do I
> > have
> > > > to be connected to a mount?
> > > >
> > > > Konstantin
> > > >
> > > >
> > > > Konstantin v. Poschinger
> > > >
> > > > Hammerichstr. 5
> > > > 22605 Hamburg
> > > > 040/8805747
> > > > 0171 1983476
> > > >
> > > >
> > > > Am 20.03.2020 um 05:32 schrieb Ray Gralak <groups3@gralak.com>:
> > > >
> > > > Hi Brian,
> > > >
> > > > When you run APCC it will indicate a new version is available in the title. Then from APCC's help
menu
> > > > you can use Check for updates to get the download link.
> > > >
> > > > -Ray Gralak
> > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-
pro&data=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%
7C1%7C0%7C637203560606099685&sdata=E%2BiQfKM5A8tby1LT8BQ%2BcHCnp5n4TfC2GFQAhQXoUCA%
3D&reserved=0>
> > > > Author of PEMPro V3: https://www.ccdware.com
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01
%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
03560606099685&sdata=juuzL1G3w%2Be410opEygk3XmLYTlBeylE2xd%2FSMZWU%2Bw%3D&reserved=0>
<https://www.ccdware.com
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01
%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
03560606099685&sdata=juuzL1G3w%2Be410opEygk3XmLYTlBeylE2xd%2FSMZWU%2Bw%3D&reserved=0> >
<https://www.ccdware.com
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01
%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
03560606109694&sdata=qrKU07DMQa7PIF8SHtHDv%2BcnTX7IP%2BEMJMNndwqjelk%3D&reserved=0> >
<https://www.ccdware.com
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01
%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
03560606109694&sdata=qrKU07DMQa7PIF8SHtHDv%2BcnTX7IP%2BEMJMNndwqjelk%3D&reserved=0> >
> <https://www.ccdware.com
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01
%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
03560606119704&sdata=HrtaDN9h6ZyZU52BF0qEombtDxcYboCjJ7yYMIT718E%3D&reserved=0> >
> > <https://www.ccdware.com/
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01
%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
03560606119704&sdata=HrtaDN9h6ZyZU52BF0qEombtDxcYboCjJ7yYMIT718E%3D&reserved=0> >
> > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&dat
a=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7
C0%7C637203560606129713&sdata=Pxri8iOW7HNtxdtQVrIriaIonNzSACZfHdjqF%2BgeKzk%3D&reserved=0>
> > > >
> > > >
> > > >
> > > >
> > > > -----Original Message-----
> > > > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> [mailto:main@ap-gto.groups.io] On
Behalf Of Brian Valente
> > > > Sent: Thursday, March 19, 2020 8:39 PM
> > > > To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>
> > > > Subject: Re: [ap-gto] APCC rate settings
> > > >
> > > > Ray where can we download this latest version?
> > > >
> > > > AP site only has link to 1.8.0.5 right now
> > > >
> > > > thanks -Brian
> > > >
> > > > On Thu, Mar 19, 2020 at 8:21 PM Ray Gralak <groups3@gralak.com> wrote:
> > > >
> > > >
> > > > > Running APPC 1.8.0.4 with GTO4 on my Mach1 it appears there are only four rate settings
now;
> > > > formerly
> > > > there
> > > > > were several more?
> > > >
> > > > That was fixed in 1.8.0.8/9.
> > > >
> > > > -Ray Gralak
> > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-
pro&data=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%
7C1%7C0%7C637203560606129713&sdata=CErKXfkGrtk5bCxG0ePWlQONph7%2Bs8cdjeE9mLoGuL8%3D&re
served=0>
> > > > Author of PEMPro V3: https://www.ccdware.com
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01
%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
03560606139717&sdata=UL5K0xcR4Gy5KPoAZ%2FKacCd5dQbaog8Qk8TlK8GPM3w%3D&reserved=0>
> > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&dat
a=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7
C0%7C637203560606139717&sdata=76a3EFYZecW4WG8jtEeevDMw4ed%2BQvnU3il1JxH0z4c%3D&reserved
=0>
> > > >
> > > >
> > > > > -----Original Message-----
> > > > > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> [mailto:main@ap-gto.groups.io]
On Behalf Of Peter Bresler via
> > > > Groups.Io
> > > > > Sent: Thursday, March 19, 2020 8:11 PM
> > > > > To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>
> > > > > Subject: [ap-gto] APCC rate settings
> > > > >
> > > > > Running APPC 1.8.0.4 with GTO4 on my Mach1 it appears there are only four rate settings
now;
> > > > formerly
> > > > there
> > > > > were several more?
> > > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > --
> > > >
> > > > Brian
> > > >
> > > >
> > > >
> > > > Brian Valente
> > > > portfolio brianvalentephotography.com <http://brianvalentephotography.com/
<https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com%2F&data=
02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
%7C637203560606149722&sdata=q4lkAITUeJaxxigEjjPxe73dg%2B52QFmJJz2p65PnxJM%3D&reserved=0> >
> > > > <http://brianvalentephotography.com
<https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com%2F&data=
02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
%7C637203560606149722&sdata=q4lkAITUeJaxxigEjjPxe73dg%2B52QFmJJz2p65PnxJM%3D&reserved=0>
<http://brianvalentephotography.com
<https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com%2F&data=
02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
%7C637203560606159727&sdata=6gRCJiJ%2BPEwmHLS3h%2B7LeLwraZPdwAhex1RKPMhdfTg%3D&reserv
ed=0> >
<http://brianvalentephotography.com
<https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com%2F&data=
02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
%7C637203560606159727&sdata=6gRCJiJ%2BPEwmHLS3h%2B7LeLwraZPdwAhex1RKPMhdfTg%3D&reserv
ed=0> >
> <http://brianvalentephotography.com
<https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com%2F&data=
02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
%7C637203560606169736&sdata=pSwkYYTzxPzykbZHkcR1VzdoQ587Dh1KWEYr6h0vqjw%3D&reserved=0> >
> > <http://brianvalentephotography.com
<https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com%2F&data=
02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
%7C637203560606169736&sdata=pSwkYYTzxPzykbZHkcR1VzdoQ587Dh1KWEYr6h0vqjw%3D&reserved=0> >
> > > <http://brianvalentephotography.com/
<https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com%2F&data=
02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
%7C637203560606179741&sdata=1dXIGVZodSvmeqKWVOKZeGmR%2FW7hKUOm92KtpJ%2B7wQ4%3D&res
erved=0> > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
>
>
>
>
>












--

Brian



Brian Valente
portfolio brianvalentephotography.com <http://brianvalentephotography.com
<https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com%2F&data=
02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
%7C637203560606179741&sdata=1dXIGVZodSvmeqKWVOKZeGmR%2FW7hKUOm92KtpJ%2B7wQ4%3D&res
erved=0> >





Re: APCC rate settings

 

I literally just applied all the Windows updates and did the 1.8.0.5 update before running the check

ipv4 is active on that connection, and it's connected to the internet (which is how i did the other updates)

however, it's on it's packed up and on its way to obstech now, so i won't be able to do any checking or testing for a few weeks

On Fri, Mar 20, 2020 at 7:45 PM Ray Gralak <groups3@...> wrote:
Brian and cytan,

1. I am wondering if you have IPV4 enabled on your LAN port?

2. Have you applied all Windows updates and especially all optional updates having to do with .Net framework?

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3:  https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


> -----Original Message-----
> From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Brian Valente
> Sent: Friday, March 20, 2020 7:27 PM
> To: main@ap-gto.groups.io
> Subject: Re: [ap-gto] APCC rate settings
>
> fwiw mine reported no updates either, but i'm not too worried about it. i'll watch for updates here
>
> On Fri, Mar 20, 2020 at 6:58 PM Cheng-Yang Tan via Groups.Io <cytan299=yahoo.com@groups.io> wrote:
>
>
>       Hi Ray,
>          I added APCC to the firewall but the problem remains:
>       Inline image
>
>       cytan
>
>
>
>       On Friday, March 20, 2020, 08:49:09 PM CDT, Ray Gralak <groups3@...> wrote:
>
>
>       > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?
>
>       AstroPhysicsCommandCenter.exe
>
>       -Ray Gralak
>       Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
>       Author of PEMPro V3:  https://www.ccdware.com
>       Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>
>
>       > -----Original Message-----
>       > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via
> Groups.Io
>       > Sent: Friday, March 20, 2020 10:55 AM
>       > To: main@ap-gto.groups.io
>       > Subject: Re: [ap-gto] APCC rate settings
>       >
>       > Hi Ray,
>       >    Sorry for being dumber than rocks when it comes to Windows stuff. I'm more of a dumber than rocks
> Mac user :)
>       > Here's the screen shot for the firewall settings on my Win 10:
>       >
>       > Inline image
>       >
>       > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?
>       >
>       > cytan
>       >
>       >
>       >
>       > On Friday, March 20, 2020, 12:49:39 PM CDT, Ray Gralak <groups3@...> wrote:
>       >
>       >
>       > Windows Defender Firewall can block applications. Without realizing the impact you might have clicked
> yes to a
>       > prompt that disabled APCC from being able to access the web. There is not much else that could prevent
> APCC
>       > from doing a simple HTML request. I guess maybe it could be that you need to update windows or haven't
> updated
>       > an optional update related to .Net framework.
>       >
>       > -Ray Gralak
>       > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
>       > Author of PEMPro V3:  https://www.ccdware.com
>       > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>       >
>       >
>       > > -----Original Message-----
>       > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via
> Groups.Io
>       > > Sent: Friday, March 20, 2020 10:37 AM
>       > > To: main@ap-gto.groups.io
>       > > Subject: Re: [ap-gto] APCC rate settings
>       > >
>       > > Hi Ray
>       > >  I don't have any purchased AV on my Win10. Unless you mean whatever AV that comes standard on
> Win10?
>       > >
>       > > cytan
>       > >
>       > > On Friday, March 20, 2020, 12:33:02 PM CDT, Ray Gralak <groups3@...> wrote:
>       > >
>       > >
>       > > Okay, then maybe your anti-virus application is blocking APCC from sending anything off your
> computer.
>       > >
>       > > Try turning AV off then try again.
>       > >
>       > > -Ray Gralak
>       > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
>       > > Author of PEMPro V3:  https://www.ccdware.com
>       > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>       > >
>       > >
>       > > > -----Original Message-----
>       > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via
> Groups.Io
>       > > > Sent: Friday, March 20, 2020 9:45 AM
>       > > > To: main@ap-gto.groups.io
>       > > > Subject: Re: [ap-gto] APCC rate settings
>       > > >
>       > > > Hi Ray
>       > > >    I can see https://www.siriusimaging.com, <https://www.siriusimaging.com,>
> <https://www.siriusimaging.com,>
>       > <https://www.siriusimaging.com,> but 1.8.0.4 does not see the
>       > > update.
>       > > >
>       > > > cytan
>       > > >
>       > > > On Friday, March 20, 2020, 11:27:28 AM CDT, Ray Gralak <groups3@...> wrote:
>       > > >
>       > > >
>       > > > No connection is required.
>       > > >
>       > > > You're computer/browser must be able to access https://www.siriusimaging.com.
>       > > >
>       > > > -Ray Gralak
>       > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
>       > > > Author of PEMPro V3:  https://www.ccdware.com
>       > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>       > > >
>       > > >
>       > > > > -----Original Message-----
>       > > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Konstantin von
>       > > > > Sent: Friday, March 20, 2020 8:16 AM
>       > > > > To: main@ap-gto.groups.io
>       > > > > Subject: Re: [ap-gto] APCC rate settings
>       > > > >
>       > > > > Hi Ray,
>       > > > >
>       > > > > I ran APCC Pro 1.8.0.5. When I check for updates I get the answer No updates to APCC are
> available. Do I
>       > > have
>       > > > > to be connected to a mount?
>       > > > >
>       > > > > Konstantin
>       > > > >
>       > > > >
>       > > > > Konstantin v. Poschinger
>       > > > >
>       > > > > Hammerichstr. 5
>       > > > > 22605 Hamburg
>       > > > > 040/8805747
>       > > > > 0171 1983476
>       > > > >
>       > > > >
>       > > > >    Am 20.03.2020 um 05:32 schrieb Ray Gralak <groups3@...>:
>       > > > >
>       > > > >    Hi Brian,
>       > > > >
>       > > > >    When you run APCC it will indicate a new version is available in the title. Then from APCC's help
> menu
>       > > > > you can use Check for updates to get the download link.
>       > > > >
>       > > > >    -Ray Gralak
>       > > > >    Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
>       > > > >    Author of PEMPro V3:  https://www.ccdware.com <https://www.ccdware.com>
> <https://www.ccdware.com> <https://www.ccdware.com>
>       > <https://www.ccdware.com>
>       > > <https://www.ccdware.com/>
>       > > > >    Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>       > > > >
>       > > > >
>       > > > >
>       > > > >
>       > > > >        -----Original Message-----
>       > > > >        From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Brian Valente
>       > > > >        Sent: Thursday, March 19, 2020 8:39 PM
>       > > > >        To: main@ap-gto.groups.io
>       > > > >        Subject: Re: [ap-gto] APCC rate settings
>       > > > >
>       > > > >        Ray where can we download this latest version?
>       > > > >
>       > > > >        AP site only has link to 1.8.0.5 right now
>       > > > >
>       > > > >        thanks -Brian
>       > > > >
>       > > > >        On Thu, Mar 19, 2020 at 8:21 PM Ray Gralak <groups3@...> wrote:
>       > > > >
>       > > > >
>       > > > >        > Running APPC 1.8.0.4  with GTO4 on my Mach1 it appears there are only four rate settings
> now;
>       > > > > formerly
>       > > > >        there
>       > > > >        > were several more?
>       > > > >
>       > > > >        That was fixed in 1.8.0.8/9.
>       > > > >
>       > > > >        -Ray Gralak
>       > > > >        Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
>       > > > >        Author of PEMPro V3:  https://www.ccdware.com
>       > > > >        Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>       > > > >
>       > > > >
>       > > > >        > -----Original Message-----
>       > > > >        > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Peter Bresler via
>       > > > > Groups.Io
>       > > > >        > Sent: Thursday, March 19, 2020 8:11 PM
>       > > > >        > To: main@ap-gto.groups.io
>       > > > >        > Subject: [ap-gto] APCC rate settings
>       > > > >        >
>       > > > >        > Running APPC 1.8.0.4  with GTO4 on my Mach1 it appears there are only four rate settings
> now;
>       > > > > formerly
>       > > > >        there
>       > > > >        > were several more?
>       > > > >        >
>       > > > >
>       > > > >
>       > > > >
>       > > > >
>       > > > >
>       > > > >
>       > > > >
>       > > > >
>       > > > >        --
>       > > > >
>       > > > >        Brian
>       > > > >
>       > > > >
>       > > > >
>       > > > >        Brian Valente
>       > > > >        portfolio brianvalentephotography.com <http://brianvalentephotography.com/>
>       > > > > <http://brianvalentephotography.com <http://brianvalentephotography.com>
> <http://brianvalentephotography.com>
>       > <http://brianvalentephotography.com>
>       > > <http://brianvalentephotography.com>
>       > > > <http://brianvalentephotography.com/> >
>       > > > >
>       > > > >
>       > > > >
>       > > > >
>       > > > >
>       > > > >
>       > > > >
>       > > > >
>       > > > >
>       > > >
>       > > >
>       > > >
>       > > >
>       > > >
>       > > >
>       > >
>       > >
>       > >
>       > >
>       > >
>       > >
>       >
>       >
>       >
>       >
>       >
>
>
>
>
>
>
>
>
>
>
>
>
> --
>
> Brian
>
>
>
> Brian Valente
> portfolio brianvalentephotography.com  <http://brianvalentephotography.com>
>






--
Brian 



Brian Valente


Re: APCC rate settings

Cheng-Yang Tan
 

I just sent the info to Ray.

cytan

On Friday, March 20, 2020, 09:56:54 PM CDT, Bill Long <bill@...> wrote:


Open CMD.exe and run this:

ipconfig /all 

Then paste in the results into an email to Ray directly. 


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Cheng-Yang Tan via Groups.Io <cytan299@...>
Sent: Friday, March 20, 2020 7:54 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] APCC rate settings
 
Hi Ray,
   You mean whether IPV4 is enabled on my cable modem? I'm actually not sure. I logged into it nowhere does it explicitly say IPv4, but do see internet addresses that look like IPv4 for the modem. There is a tab for IPv6. 

   Windows10 is at latest service pack and everything is up to date.

cytan

On Friday, March 20, 2020, 09:45:20 PM CDT, Ray Gralak <groups3@...> wrote:


Brian and cytan,

1. I am wondering if you have IPV4 enabled on your LAN port?

2. Have you applied all Windows updates and especially all optional updates having to do with .Net framework?

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3:  https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


> -----Original Message-----
> From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Brian Valente
> Sent: Friday, March 20, 2020 7:27 PM
> To: main@ap-gto.groups.io
> Subject: Re: [ap-gto] APCC rate settings
>
> fwiw mine reported no updates either, but i'm not too worried about it. i'll watch for updates here
>
> On Fri, Mar 20, 2020 at 6:58 PM Cheng-Yang Tan via Groups.Io <cytan299=yahoo.com@groups.io> wrote:
>
>
>     Hi Ray,
>       I added APCC to the firewall but the problem remains:
>     Inline image
>
>     cytan
>
>
>
>     On Friday, March 20, 2020, 08:49:09 PM CDT, Ray Gralak <groups3@...> wrote:
>
>
>     > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?
>
>     AstroPhysicsCommandCenter.exe
>
>     -Ray Gralak
>     Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
>     Author of PEMPro V3:  https://www.ccdware.com
>     Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>
>
>     > -----Original Message-----
>     > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via
> Groups.Io
>     > Sent: Friday, March 20, 2020 10:55 AM
>     > To: main@ap-gto.groups.io
>     > Subject: Re: [ap-gto] APCC rate settings
>     >
>     > Hi Ray,
>     >    Sorry for being dumber than rocks when it comes to Windows stuff. I'm more of a dumber than rocks
> Mac user :)
>     > Here's the screen shot for the firewall settings on my Win 10:
>     >
>     > Inline image
>     >
>     > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?
>     >
>     > cytan
>     >
>     >
>     >
>     > On Friday, March 20, 2020, 12:49:39 PM CDT, Ray Gralak <groups3@...> wrote:
>     >
>     >
>     > Windows Defender Firewall can block applications. Without realizing the impact you might have clicked
> yes to a
>     > prompt that disabled APCC from being able to access the web. There is not much else that could prevent
> APCC
>     > from doing a simple HTML request. I guess maybe it could be that you need to update windows or haven't
> updated
>     > an optional update related to .Net framework.
>     >
>     > -Ray Gralak
>     > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
>     > Author of PEMPro V3:  https://www.ccdware.com
>     > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>     >
>     >
>     > > -----Original Message-----
>     > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via
> Groups.Io
>     > > Sent: Friday, March 20, 2020 10:37 AM
>     > > To: main@ap-gto.groups.io
>     > > Subject: Re: [ap-gto] APCC rate settings
>     > >
>     > > Hi Ray
>     > >  I don't have any purchased AV on my Win10. Unless you mean whatever AV that comes standard on
> Win10?
>     > >
>     > > cytan
>     > >
>     > > On Friday, March 20, 2020, 12:33:02 PM CDT, Ray Gralak <groups3@...> wrote:
>     > >
>     > >
>     > > Okay, then maybe your anti-virus application is blocking APCC from sending anything off your
> computer.
>     > >
>     > > Try turning AV off then try again.
>     > >
>     > > -Ray Gralak
>     > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
>     > > Author of PEMPro V3:  https://www.ccdware.com
>     > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>     > >
>     > >
>     > > > -----Original Message-----
>     > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via
> Groups.Io
>     > > > Sent: Friday, March 20, 2020 9:45 AM
>     > > > To: main@ap-gto.groups.io
>     > > > Subject: Re: [ap-gto] APCC rate settings
>     > > >
>     > > > Hi Ray
>     > > >    I can see https://www.siriusimaging.com, <https://www.siriusimaging.com,>
> <https://www.siriusimaging.com,>
>     > <https://www.siriusimaging.com,> but 1.8.0.4 does not see the
>     > > update.
>     > > >
>     > > > cytan
>     > > >
>     > > > On Friday, March 20, 2020, 11:27:28 AM CDT, Ray Gralak <groups3@...> wrote:
>     > > >
>     > > >
>     > > > No connection is required.
>     > > >
>     > > > You're computer/browser must be able to access https://www.siriusimaging.com.
>     > > >
>     > > > -Ray Gralak
>     > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
>     > > > Author of PEMPro V3:  https://www.ccdware.com
>     > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>     > > >
>     > > >
>     > > > > -----Original Message-----
>     > > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Konstantin von
>     > > > > Sent: Friday, March 20, 2020 8:16 AM
>     > > > > To: main@ap-gto.groups.io
>     > > > > Subject: Re: [ap-gto] APCC rate settings
>     > > > >
>     > > > > Hi Ray,
>     > > > >
>     > > > > I ran APCC Pro 1.8.0.5. When I check for updates I get the answer No updates to APCC are
> available. Do I
>     > > have
>     > > > > to be connected to a mount?
>     > > > >
>     > > > > Konstantin
>     > > > >
>     > > > >
>     > > > > Konstantin v. Poschinger
>     > > > >
>     > > > > Hammerichstr. 5
>     > > > > 22605 Hamburg
>     > > > > 040/8805747
>     > > > > 0171 1983476
>     > > > >
>     > > > >
>     > > > >    Am 20.03.2020 um 05:32 schrieb Ray Gralak <groups3@...>:
>     > > > >
>     > > > >    Hi Brian,
>     > > > >
>     > > > >    When you run APCC it will indicate a new version is available in the title. Then from APCC's help
> menu
>     > > > > you can use Check for updates to get the download link.
>     > > > >
>     > > > >    -Ray Gralak
>     > > > >    Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
>     > > > >    Author of PEMPro V3:  https://www.ccdware.com <https://www.ccdware.com>
> <https://www.ccdware.com> <https://www.ccdware.com>
>     > <https://www.ccdware.com>
>     > > <https://www.ccdware.com/>
>     > > > >    Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >        -----Original Message-----
>     > > > >        From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Brian Valente
>     > > > >        Sent: Thursday, March 19, 2020 8:39 PM
>     > > > >        To: main@ap-gto.groups.io
>     > > > >        Subject: Re: [ap-gto] APCC rate settings
>     > > > >
>     > > > >        Ray where can we download this latest version?
>     > > > >
>     > > > >        AP site only has link to 1.8.0.5 right now
>     > > > >
>     > > > >        thanks -Brian
>     > > > >
>     > > > >        On Thu, Mar 19, 2020 at 8:21 PM Ray Gralak <groups3@...> wrote:
>     > > > >
>     > > > >
>     > > > >        > Running APPC 1.8.0.4  with GTO4 on my Mach1 it appears there are only four rate settings
> now;
>     > > > > formerly
>     > > > >        there
>     > > > >        > were several more?
>     > > > >
>     > > > >        That was fixed in 1.8.0.8/9.
>     > > > >
>     > > > >        -Ray Gralak
>     > > > >        Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
>     > > > >        Author of PEMPro V3:  https://www.ccdware.com
>     > > > >        Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>     > > > >
>     > > > >
>     > > > >        > -----Original Message-----
>     > > > >        > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Peter Bresler via
>     > > > > Groups.Io
>     > > > >        > Sent: Thursday, March 19, 2020 8:11 PM
>     > > > >        > To: main@ap-gto.groups.io
>     > > > >        > Subject: [ap-gto] APCC rate settings
>     > > > >        >
>     > > > >        > Running APPC 1.8.0.4  with GTO4 on my Mach1 it appears there are only four rate settings
> now;
>     > > > > formerly
>     > > > >        there
>     > > > >        > were several more?
>     > > > >        >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >        --
>     > > > >
>     > > > >        Brian
>     > > > >
>     > > > >
>     > > > >
>     > > > >        Brian Valente
>     > > > >        portfolio brianvalentephotography.com <http://brianvalentephotography.com/>
>     > > > > <http://brianvalentephotography.com <http://brianvalentephotography.com>
> <http://brianvalentephotography.com>
>     > <http://brianvalentephotography.com>
>     > > <http://brianvalentephotography.com>
>     > > > <http://brianvalentephotography.com/> >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > >
>     > > >
>     > > >
>     > > >
>     > > >
>     > > >
>     > >
>     > >
>     > >
>     > >
>     > >
>     > >
>     >
>     >
>     >
>     >
>     >
>
>
>
>
>
>
>
>
>
>
>
>
> --
>
> Brian
>
>
>
> Brian Valente
> portfolio brianvalentephotography.com  <http://brianvalentephotography.com>
>





Re: APCC rate settings

Ray Gralak
 

>    You mean whether IPV4 is enabled on my cable modem? I'm actually not sure. I logged into it nowhere does it

> explicitly say IPv4, but do see internet addresses that look like IPv4 for the modem. There is a tab for IPv6.

 

It’s in windows, under Network Connections. For example, here is a screen shot from one of my computers. Find the proper network connection, right click and select properties. Make sure TCP/IPv4 is enabled

 

 

-Ray Gralak

Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro

Author of PEMPro V3:  https://www.ccdware.com

Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

 

 

> -----Original Message-----

> From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via Groups.Io

> Sent: Friday, March 20, 2020 7:54 PM

> To: main@ap-gto.groups.io

> Subject: Re: [ap-gto] APCC rate settings

>

> Hi Ray,

>    You mean whether IPV4 is enabled on my cable modem? I'm actually not sure. I logged into it nowhere does it

> explicitly say IPv4, but do see internet addresses that look like IPv4 for the modem. There is a tab for IPv6.

>

>    Windows10 is at latest service pack and everything is up to date.

>

> cytan

>

> On Friday, March 20, 2020, 09:45:20 PM CDT, Ray Gralak <groups3@...> wrote:

>

>

> Brian and cytan,

>

> 1. I am wondering if you have IPV4 enabled on your LAN port?

>

> 2. Have you applied all Windows updates and especially all optional updates having to do with .Net framework?

>

> -Ray Gralak

> Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro

> Author of PEMPro V3:  https://www.ccdware.com

> Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

>

>

> > -----Original Message-----

> > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Brian Valente

> > Sent: Friday, March 20, 2020 7:27 PM

> > To: main@ap-gto.groups.io

> > Subject: Re: [ap-gto] APCC rate settings

> >

> > fwiw mine reported no updates either, but i'm not too worried about it. i'll watch for updates here

> >

> > On Fri, Mar 20, 2020 at 6:58 PM Cheng-Yang Tan via Groups.Io <cytan299@...> wrote:

> >

> >

> >     Hi Ray,

> >       I added APCC to the firewall but the problem remains:

> >     Inline image

> >

> >     cytan

> >

> >

> >

> >     On Friday, March 20, 2020, 08:49:09 PM CDT, Ray Gralak <groups3@...> wrote:

> >

> >

> >     > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?

> >

> >     AstroPhysicsCommandCenter.exe

> >

> >     -Ray Gralak

> >     Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro

> >     Author of PEMPro V3:  https://www.ccdware.com

> >     Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

> >

> >

> >     > -----Original Message-----

> >     > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via

> > Groups.Io

> >     > Sent: Friday, March 20, 2020 10:55 AM

> >     > To: main@ap-gto.groups.io

> >     > Subject: Re: [ap-gto] APCC rate settings

> >     >

> >     > Hi Ray,

> >     >    Sorry for being dumber than rocks when it comes to Windows stuff. I'm more of a dumber than rocks

> > Mac user :)

> >     > Here's the screen shot for the firewall settings on my Win 10:

> >     >

> >     > Inline image

> >     >

> >     > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?

> >     >

> >     > cytan

> >     >

> >     >

> >     >

> >     > On Friday, March 20, 2020, 12:49:39 PM CDT, Ray Gralak <groups3@...> wrote:

> >     >

> >     >

> >     > Windows Defender Firewall can block applications. Without realizing the impact you might have clicked

> > yes to a

> >     > prompt that disabled APCC from being able to access the web. There is not much else that could prevent

> > APCC

> >     > from doing a simple HTML request. I guess maybe it could be that you need to update windows or haven't

> > updated

> >     > an optional update related to .Net framework.

> >     >

> >     > -Ray Gralak

> >     > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro

> >     > Author of PEMPro V3:  https://www.ccdware.com

> >     > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

> >     >

> >     >

> >     > > -----Original Message-----

> >     > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via

> > Groups.Io

> >     > > Sent: Friday, March 20, 2020 10:37 AM

> >     > > To: main@ap-gto.groups.io

> >     > > Subject: Re: [ap-gto] APCC rate settings

> >     > >

> >     > > Hi Ray

> >     > >  I don't have any purchased AV on my Win10. Unless you mean whatever AV that comes standard on

> > Win10?

> >     > >

> >     > > cytan

> >     > >

> >     > > On Friday, March 20, 2020, 12:33:02 PM CDT, Ray Gralak <groups3@...> wrote:

> >     > >

> >     > >

> >     > > Okay, then maybe your anti-virus application is blocking APCC from sending anything off your

> > computer.

> >     > >

> >     > > Try turning AV off then try again.

> >     > >

> >     > > -Ray Gralak

> >     > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro

> >     > > Author of PEMPro V3:  https://www.ccdware.com

> >     > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

> >     > >

> >     > >

> >     > > > -----Original Message-----

> >     > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via

> > Groups.Io

> >     > > > Sent: Friday, March 20, 2020 9:45 AM

> >     > > > To: main@ap-gto.groups.io

> >     > > > Subject: Re: [ap-gto] APCC rate settings

> >     > > >

> >     > > > Hi Ray

> >     > > >    I can see https://www.siriusimaging.com, <https://www.siriusimaging.com,>

> <https://www.siriusimaging.com,>

> > <https://www.siriusimaging.com,>

> >     > <https://www.siriusimaging.com,> but 1.8.0.4 does not see the

> >     > > update.

> >     > > >

> >     > > > cytan

> >     > > >

> >     > > > On Friday, March 20, 2020, 11:27:28 AM CDT, Ray Gralak <groups3@...> wrote:

> >     > > >

> >     > > >

> >     > > > No connection is required.

> >     > > >

> >     > > > You're computer/browser must be able to access https://www.siriusimaging.com.

> >     > > >

> >     > > > -Ray Gralak

> >     > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro

> >     > > > Author of PEMPro V3:  https://www.ccdware.com

> >     > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

> >     > > >

> >     > > >

> >     > > > > -----Original Message-----

> >     > > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Konstantin von

> >     > > > > Sent: Friday, March 20, 2020 8:16 AM

> >     > > > > To: main@ap-gto.groups.io

> >     > > > > Subject: Re: [ap-gto] APCC rate settings

> >     > > > >

> >     > > > > Hi Ray,

> >     > > > >

> >     > > > > I ran APCC Pro 1.8.0.5. When I check for updates I get the answer No updates to APCC are

> > available. Do I

> >     > > have

> >     > > > > to be connected to a mount?

> >     > > > >

> >     > > > > Konstantin

> >     > > > >

> >     > > > >

> >     > > > > Konstantin v. Poschinger

> >     > > > >

> >     > > > > Hammerichstr. 5

> >     > > > > 22605 Hamburg

> >     > > > > 040/8805747

> >     > > > > 0171 1983476

> >     > > > >

> >     > > > >

> >     > > > >    Am 20.03.2020 um 05:32 schrieb Ray Gralak <groups3@...>:

> >     > > > >

> >     > > > >    Hi Brian,

> >     > > > >

> >     > > > >    When you run APCC it will indicate a new version is available in the title. Then from APCC's help

> > menu

> >     > > > > you can use Check for updates to get the download link.

> >     > > > >

> >     > > > >    -Ray Gralak

> >     > > > >    Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro

> >     > > > >    Author of PEMPro V3:  https://www.ccdware.com <https://www.ccdware.com>

> <https://www.ccdware.com>

> > <https://www.ccdware.com> <https://www.ccdware.com>

> >     > <https://www.ccdware.com>

> >     > > <https://www.ccdware.com/>

> >     > > > >    Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > > >        -----Original Message-----

> >     > > > >        From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Brian Valente

> >     > > > >        Sent: Thursday, March 19, 2020 8:39 PM

> >     > > > >        To: main@ap-gto.groups.io

> >     > > > >        Subject: Re: [ap-gto] APCC rate settings

> >     > > > >

> >     > > > >        Ray where can we download this latest version?

> >     > > > >

> >     > > > >        AP site only has link to 1.8.0.5 right now

> >     > > > >

> >     > > > >        thanks -Brian

> >     > > > >

> >     > > > >        On Thu, Mar 19, 2020 at 8:21 PM Ray Gralak <groups3@...> wrote:

> >     > > > >

> >     > > > >

> >     > > > >        > Running APPC 1.8.0.4  with GTO4 on my Mach1 it appears there are only four rate settings

> > now;

> >     > > > > formerly

> >     > > > >        there

> >     > > > >        > were several more?

> >     > > > >

> >     > > > >        That was fixed in 1.8.0.8/9.

> >     > > > >

> >     > > > >        -Ray Gralak

> >     > > > >        Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro

> >     > > > >        Author of PEMPro V3:  https://www.ccdware.com

> >     > > > >        Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

> >     > > > >

> >     > > > >

> >     > > > >        > -----Original Message-----

> >     > > > >        > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Peter Bresler via

> >     > > > > Groups.Io

> >     > > > >        > Sent: Thursday, March 19, 2020 8:11 PM

> >     > > > >        > To: main@ap-gto.groups.io

> >     > > > >        > Subject: [ap-gto] APCC rate settings

> >     > > > >        >

> >     > > > >        > Running APPC 1.8.0.4  with GTO4 on my Mach1 it appears there are only four rate settings

> > now;

> >     > > > > formerly

> >     > > > >        there

> >     > > > >        > were several more?

> >     > > > >        >

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > > >        --

> >     > > > >

> >     > > > >        Brian

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > > >        Brian Valente

> >     > > > >        portfolio brianvalentephotography.com <http://brianvalentephotography.com/>

> >     > > > > <http://brianvalentephotography.com <http://brianvalentephotography.com>

> <http://brianvalentephotography.com>

> > <http://brianvalentephotography.com>

> >     > <http://brianvalentephotography.com>

> >     > > <http://brianvalentephotography.com>

> >     > > > <http://brianvalentephotography.com/> >

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > >

> >     > > >

> >     > > >

> >     > > >

> >     > > >

> >     > > >

> >     > >

> >     > >

> >     > >

> >     > >

> >     > >

> >     > >

> >     >

> >     >

> >     >

> >     >

> >     >

> >

> >

> >

> >

> >

> >

> >

> >

> >

> >

> >

> >

> > --

> >

> > Brian

> >

> >

> >

> > Brian Valente

> > portfolio brianvalentephotography.com  <http://brianvalentephotography.com>

> >

>

>

>

>

>


Re: APCC rate settings

Bill Long
 

Open CMD.exe and run this:

ipconfig /all 

Then paste in the results into an email to Ray directly. 


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Cheng-Yang Tan via Groups.Io <cytan299@...>
Sent: Friday, March 20, 2020 7:54 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] APCC rate settings
 
Hi Ray,
   You mean whether IPV4 is enabled on my cable modem? I'm actually not sure. I logged into it nowhere does it explicitly say IPv4, but do see internet addresses that look like IPv4 for the modem. There is a tab for IPv6. 

   Windows10 is at latest service pack and everything is up to date.

cytan

On Friday, March 20, 2020, 09:45:20 PM CDT, Ray Gralak <groups3@...> wrote:


Brian and cytan,

1. I am wondering if you have IPV4 enabled on your LAN port?

2. Have you applied all Windows updates and especially all optional updates having to do with .Net framework?

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3:  https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


> -----Original Message-----
> From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Brian Valente
> Sent: Friday, March 20, 2020 7:27 PM
> To: main@ap-gto.groups.io
> Subject: Re: [ap-gto] APCC rate settings
>
> fwiw mine reported no updates either, but i'm not too worried about it. i'll watch for updates here
>
> On Fri, Mar 20, 2020 at 6:58 PM Cheng-Yang Tan via Groups.Io <cytan299=yahoo.com@groups.io> wrote:
>
>
>     Hi Ray,
>       I added APCC to the firewall but the problem remains:
>     Inline image
>
>     cytan
>
>
>
>     On Friday, March 20, 2020, 08:49:09 PM CDT, Ray Gralak <groups3@...> wrote:
>
>
>     > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?
>
>     AstroPhysicsCommandCenter.exe
>
>     -Ray Gralak
>     Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
>     Author of PEMPro V3:  https://www.ccdware.com
>     Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>
>
>     > -----Original Message-----
>     > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via
> Groups.Io
>     > Sent: Friday, March 20, 2020 10:55 AM
>     > To: main@ap-gto.groups.io
>     > Subject: Re: [ap-gto] APCC rate settings
>     >
>     > Hi Ray,
>     >    Sorry for being dumber than rocks when it comes to Windows stuff. I'm more of a dumber than rocks
> Mac user :)
>     > Here's the screen shot for the firewall settings on my Win 10:
>     >
>     > Inline image
>     >
>     > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?
>     >
>     > cytan
>     >
>     >
>     >
>     > On Friday, March 20, 2020, 12:49:39 PM CDT, Ray Gralak <groups3@...> wrote:
>     >
>     >
>     > Windows Defender Firewall can block applications. Without realizing the impact you might have clicked
> yes to a
>     > prompt that disabled APCC from being able to access the web. There is not much else that could prevent
> APCC
>     > from doing a simple HTML request. I guess maybe it could be that you need to update windows or haven't
> updated
>     > an optional update related to .Net framework.
>     >
>     > -Ray Gralak
>     > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
>     > Author of PEMPro V3:  https://www.ccdware.com
>     > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>     >
>     >
>     > > -----Original Message-----
>     > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via
> Groups.Io
>     > > Sent: Friday, March 20, 2020 10:37 AM
>     > > To: main@ap-gto.groups.io
>     > > Subject: Re: [ap-gto] APCC rate settings
>     > >
>     > > Hi Ray
>     > >  I don't have any purchased AV on my Win10. Unless you mean whatever AV that comes standard on
> Win10?
>     > >
>     > > cytan
>     > >
>     > > On Friday, March 20, 2020, 12:33:02 PM CDT, Ray Gralak <groups3@...> wrote:
>     > >
>     > >
>     > > Okay, then maybe your anti-virus application is blocking APCC from sending anything off your
> computer.
>     > >
>     > > Try turning AV off then try again.
>     > >
>     > > -Ray Gralak
>     > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
>     > > Author of PEMPro V3:  https://www.ccdware.com
>     > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>     > >
>     > >
>     > > > -----Original Message-----
>     > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via
> Groups.Io
>     > > > Sent: Friday, March 20, 2020 9:45 AM
>     > > > To: main@ap-gto.groups.io
>     > > > Subject: Re: [ap-gto] APCC rate settings
>     > > >
>     > > > Hi Ray
>     > > >    I can see https://www.siriusimaging.com, <https://www.siriusimaging.com,>
> <https://www.siriusimaging.com,>
>     > <https://www.siriusimaging.com,> but 1.8.0.4 does not see the
>     > > update.
>     > > >
>     > > > cytan
>     > > >
>     > > > On Friday, March 20, 2020, 11:27:28 AM CDT, Ray Gralak <groups3@...> wrote:
>     > > >
>     > > >
>     > > > No connection is required.
>     > > >
>     > > > You're computer/browser must be able to access https://www.siriusimaging.com.
>     > > >
>     > > > -Ray Gralak
>     > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
>     > > > Author of PEMPro V3:  https://www.ccdware.com
>     > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>     > > >
>     > > >
>     > > > > -----Original Message-----
>     > > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Konstantin von
>     > > > > Sent: Friday, March 20, 2020 8:16 AM
>     > > > > To: main@ap-gto.groups.io
>     > > > > Subject: Re: [ap-gto] APCC rate settings
>     > > > >
>     > > > > Hi Ray,
>     > > > >
>     > > > > I ran APCC Pro 1.8.0.5. When I check for updates I get the answer No updates to APCC are
> available. Do I
>     > > have
>     > > > > to be connected to a mount?
>     > > > >
>     > > > > Konstantin
>     > > > >
>     > > > >
>     > > > > Konstantin v. Poschinger
>     > > > >
>     > > > > Hammerichstr. 5
>     > > > > 22605 Hamburg
>     > > > > 040/8805747
>     > > > > 0171 1983476
>     > > > >
>     > > > >
>     > > > >    Am 20.03.2020 um 05:32 schrieb Ray Gralak <groups3@...>:
>     > > > >
>     > > > >    Hi Brian,
>     > > > >
>     > > > >    When you run APCC it will indicate a new version is available in the title. Then from APCC's help
> menu
>     > > > > you can use Check for updates to get the download link.
>     > > > >
>     > > > >    -Ray Gralak
>     > > > >    Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
>     > > > >    Author of PEMPro V3:  https://www.ccdware.com <https://www.ccdware.com>
> <https://www.ccdware.com> <https://www.ccdware.com>
>     > <https://www.ccdware.com>
>     > > <https://www.ccdware.com/>
>     > > > >    Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >        -----Original Message-----
>     > > > >        From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Brian Valente
>     > > > >        Sent: Thursday, March 19, 2020 8:39 PM
>     > > > >        To: main@ap-gto.groups.io
>     > > > >        Subject: Re: [ap-gto] APCC rate settings
>     > > > >
>     > > > >        Ray where can we download this latest version?
>     > > > >
>     > > > >        AP site only has link to 1.8.0.5 right now
>     > > > >
>     > > > >        thanks -Brian
>     > > > >
>     > > > >        On Thu, Mar 19, 2020 at 8:21 PM Ray Gralak <groups3@...> wrote:
>     > > > >
>     > > > >
>     > > > >        > Running APPC 1.8.0.4  with GTO4 on my Mach1 it appears there are only four rate settings
> now;
>     > > > > formerly
>     > > > >        there
>     > > > >        > were several more?
>     > > > >
>     > > > >        That was fixed in 1.8.0.8/9.
>     > > > >
>     > > > >        -Ray Gralak
>     > > > >        Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
>     > > > >        Author of PEMPro V3:  https://www.ccdware.com
>     > > > >        Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>     > > > >
>     > > > >
>     > > > >        > -----Original Message-----
>     > > > >        > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Peter Bresler via
>     > > > > Groups.Io
>     > > > >        > Sent: Thursday, March 19, 2020 8:11 PM
>     > > > >        > To: main@ap-gto.groups.io
>     > > > >        > Subject: [ap-gto] APCC rate settings
>     > > > >        >
>     > > > >        > Running APPC 1.8.0.4  with GTO4 on my Mach1 it appears there are only four rate settings
> now;
>     > > > > formerly
>     > > > >        there
>     > > > >        > were several more?
>     > > > >        >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >        --
>     > > > >
>     > > > >        Brian
>     > > > >
>     > > > >
>     > > > >
>     > > > >        Brian Valente
>     > > > >        portfolio brianvalentephotography.com <http://brianvalentephotography.com/>
>     > > > > <http://brianvalentephotography.com <http://brianvalentephotography.com>
> <http://brianvalentephotography.com>
>     > <http://brianvalentephotography.com>
>     > > <http://brianvalentephotography.com>
>     > > > <http://brianvalentephotography.com/> >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > >
>     > > >
>     > > >
>     > > >
>     > > >
>     > > >
>     > >
>     > >
>     > >
>     > >
>     > >
>     > >
>     >
>     >
>     >
>     >
>     >
>
>
>
>
>
>
>
>
>
>
>
>
> --
>
> Brian
>
>
>
> Brian Valente
> portfolio brianvalentephotography.com  <http://brianvalentephotography.com>
>





Re: APCC rate settings

Cheng-Yang Tan
 

Hi Ray,
   You mean whether IPV4 is enabled on my cable modem? I'm actually not sure. I logged into it nowhere does it explicitly say IPv4, but do see internet addresses that look like IPv4 for the modem. There is a tab for IPv6. 

   Windows10 is at latest service pack and everything is up to date.

cytan

On Friday, March 20, 2020, 09:45:20 PM CDT, Ray Gralak <groups3@...> wrote:


Brian and cytan,

1. I am wondering if you have IPV4 enabled on your LAN port?

2. Have you applied all Windows updates and especially all optional updates having to do with .Net framework?

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3:  https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


> -----Original Message-----
> From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Brian Valente
> Sent: Friday, March 20, 2020 7:27 PM
> To: main@ap-gto.groups.io
> Subject: Re: [ap-gto] APCC rate settings
>
> fwiw mine reported no updates either, but i'm not too worried about it. i'll watch for updates here
>
> On Fri, Mar 20, 2020 at 6:58 PM Cheng-Yang Tan via Groups.Io <cytan299=yahoo.com@groups.io> wrote:
>
>
>     Hi Ray,
>       I added APCC to the firewall but the problem remains:
>     Inline image
>
>     cytan
>
>
>
>     On Friday, March 20, 2020, 08:49:09 PM CDT, Ray Gralak <groups3@...> wrote:
>
>
>     > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?
>
>     AstroPhysicsCommandCenter.exe
>
>     -Ray Gralak
>     Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
>     Author of PEMPro V3:  https://www.ccdware.com
>     Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>
>
>     > -----Original Message-----
>     > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via
> Groups.Io
>     > Sent: Friday, March 20, 2020 10:55 AM
>     > To: main@ap-gto.groups.io
>     > Subject: Re: [ap-gto] APCC rate settings
>     >
>     > Hi Ray,
>     >    Sorry for being dumber than rocks when it comes to Windows stuff. I'm more of a dumber than rocks
> Mac user :)
>     > Here's the screen shot for the firewall settings on my Win 10:
>     >
>     > Inline image
>     >
>     > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?
>     >
>     > cytan
>     >
>     >
>     >
>     > On Friday, March 20, 2020, 12:49:39 PM CDT, Ray Gralak <groups3@...> wrote:
>     >
>     >
>     > Windows Defender Firewall can block applications. Without realizing the impact you might have clicked
> yes to a
>     > prompt that disabled APCC from being able to access the web. There is not much else that could prevent
> APCC
>     > from doing a simple HTML request. I guess maybe it could be that you need to update windows or haven't
> updated
>     > an optional update related to .Net framework.
>     >
>     > -Ray Gralak
>     > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
>     > Author of PEMPro V3:  https://www.ccdware.com
>     > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>     >
>     >
>     > > -----Original Message-----
>     > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via
> Groups.Io
>     > > Sent: Friday, March 20, 2020 10:37 AM
>     > > To: main@ap-gto.groups.io
>     > > Subject: Re: [ap-gto] APCC rate settings
>     > >
>     > > Hi Ray
>     > >  I don't have any purchased AV on my Win10. Unless you mean whatever AV that comes standard on
> Win10?
>     > >
>     > > cytan
>     > >
>     > > On Friday, March 20, 2020, 12:33:02 PM CDT, Ray Gralak <groups3@...> wrote:
>     > >
>     > >
>     > > Okay, then maybe your anti-virus application is blocking APCC from sending anything off your
> computer.
>     > >
>     > > Try turning AV off then try again.
>     > >
>     > > -Ray Gralak
>     > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
>     > > Author of PEMPro V3:  https://www.ccdware.com
>     > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>     > >
>     > >
>     > > > -----Original Message-----
>     > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via
> Groups.Io
>     > > > Sent: Friday, March 20, 2020 9:45 AM
>     > > > To: main@ap-gto.groups.io
>     > > > Subject: Re: [ap-gto] APCC rate settings
>     > > >
>     > > > Hi Ray
>     > > >    I can see https://www.siriusimaging.com, <https://www.siriusimaging.com,>
> <https://www.siriusimaging.com,>
>     > <https://www.siriusimaging.com,> but 1.8.0.4 does not see the
>     > > update.
>     > > >
>     > > > cytan
>     > > >
>     > > > On Friday, March 20, 2020, 11:27:28 AM CDT, Ray Gralak <groups3@...> wrote:
>     > > >
>     > > >
>     > > > No connection is required.
>     > > >
>     > > > You're computer/browser must be able to access https://www.siriusimaging.com.
>     > > >
>     > > > -Ray Gralak
>     > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
>     > > > Author of PEMPro V3:  https://www.ccdware.com
>     > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>     > > >
>     > > >
>     > > > > -----Original Message-----
>     > > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Konstantin von
>     > > > > Sent: Friday, March 20, 2020 8:16 AM
>     > > > > To: main@ap-gto.groups.io
>     > > > > Subject: Re: [ap-gto] APCC rate settings
>     > > > >
>     > > > > Hi Ray,
>     > > > >
>     > > > > I ran APCC Pro 1.8.0.5. When I check for updates I get the answer No updates to APCC are
> available. Do I
>     > > have
>     > > > > to be connected to a mount?
>     > > > >
>     > > > > Konstantin
>     > > > >
>     > > > >
>     > > > > Konstantin v. Poschinger
>     > > > >
>     > > > > Hammerichstr. 5
>     > > > > 22605 Hamburg
>     > > > > 040/8805747
>     > > > > 0171 1983476
>     > > > >
>     > > > >
>     > > > >    Am 20.03.2020 um 05:32 schrieb Ray Gralak <groups3@...>:
>     > > > >
>     > > > >    Hi Brian,
>     > > > >
>     > > > >    When you run APCC it will indicate a new version is available in the title. Then from APCC's help
> menu
>     > > > > you can use Check for updates to get the download link.
>     > > > >
>     > > > >    -Ray Gralak
>     > > > >    Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
>     > > > >    Author of PEMPro V3:  https://www.ccdware.com <https://www.ccdware.com>
> <https://www.ccdware.com> <https://www.ccdware.com>
>     > <https://www.ccdware.com>
>     > > <https://www.ccdware.com/>
>     > > > >    Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >        -----Original Message-----
>     > > > >        From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Brian Valente
>     > > > >        Sent: Thursday, March 19, 2020 8:39 PM
>     > > > >        To: main@ap-gto.groups.io
>     > > > >        Subject: Re: [ap-gto] APCC rate settings
>     > > > >
>     > > > >        Ray where can we download this latest version?
>     > > > >
>     > > > >        AP site only has link to 1.8.0.5 right now
>     > > > >
>     > > > >        thanks -Brian
>     > > > >
>     > > > >        On Thu, Mar 19, 2020 at 8:21 PM Ray Gralak <groups3@...> wrote:
>     > > > >
>     > > > >
>     > > > >        > Running APPC 1.8.0.4  with GTO4 on my Mach1 it appears there are only four rate settings
> now;
>     > > > > formerly
>     > > > >        there
>     > > > >        > were several more?
>     > > > >
>     > > > >        That was fixed in 1.8.0.8/9.
>     > > > >
>     > > > >        -Ray Gralak
>     > > > >        Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
>     > > > >        Author of PEMPro V3:  https://www.ccdware.com
>     > > > >        Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>     > > > >
>     > > > >
>     > > > >        > -----Original Message-----
>     > > > >        > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Peter Bresler via
>     > > > > Groups.Io
>     > > > >        > Sent: Thursday, March 19, 2020 8:11 PM
>     > > > >        > To: main@ap-gto.groups.io
>     > > > >        > Subject: [ap-gto] APCC rate settings
>     > > > >        >
>     > > > >        > Running APPC 1.8.0.4  with GTO4 on my Mach1 it appears there are only four rate settings
> now;
>     > > > > formerly
>     > > > >        there
>     > > > >        > were several more?
>     > > > >        >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >        --
>     > > > >
>     > > > >        Brian
>     > > > >
>     > > > >
>     > > > >
>     > > > >        Brian Valente
>     > > > >        portfolio brianvalentephotography.com <http://brianvalentephotography.com/>
>     > > > > <http://brianvalentephotography.com <http://brianvalentephotography.com>
> <http://brianvalentephotography.com>
>     > <http://brianvalentephotography.com>
>     > > <http://brianvalentephotography.com>
>     > > > <http://brianvalentephotography.com/> >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > >
>     > > >
>     > > >
>     > > >
>     > > >
>     > > >
>     > >
>     > >
>     > >
>     > >
>     > >
>     > >
>     >
>     >
>     >
>     >
>     >
>
>
>
>
>
>
>
>
>
>
>
>
> --
>
> Brian
>
>
>
> Brian Valente
> portfolio brianvalentephotography.com  <http://brianvalentephotography.com>
>





Re: APPM Model Creation Problem

Wayne Hixson
 

Ok. Most of the points would be on the east side of the meridian and APPM does limit the automated points to the visible area.. I'm assuming it will do a flip if I attempt to map a few stars on the other side?


Re: APCC rate settings

Bill Long
 

I just tested this and was given the option to download the new version. I am on 1.8.0.5 (Pro) though. Not sure that matters... 


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Brian Valente <bvalente@...>
Sent: Friday, March 20, 2020 7:27 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] APCC rate settings
 
fwiw mine reported no updates either, but i'm not too worried about it. i'll watch for updates here

On Fri, Mar 20, 2020 at 6:58 PM Cheng-Yang Tan via Groups.Io <cytan299=yahoo.com@groups.io> wrote:
Hi Ray,
   I added APCC to the firewall but the problem remains:
Inline image

cytan


On Friday, March 20, 2020, 08:49:09 PM CDT, Ray Gralak <groups3@...> wrote:


> I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?

AstroPhysicsCommandCenter.exe

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3:  https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


> -----Original Message-----
> From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via Groups.Io
> Sent: Friday, March 20, 2020 10:55 AM
> To: main@ap-gto.groups.io
> Subject: Re: [ap-gto] APCC rate settings
>
> Hi Ray,
>    Sorry for being dumber than rocks when it comes to Windows stuff. I'm more of a dumber than rocks Mac user :)
> Here's the screen shot for the firewall settings on my Win 10:
>
> Inline image
>
> I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?
>
> cytan
>
>
>
> On Friday, March 20, 2020, 12:49:39 PM CDT, Ray Gralak <groups3@...> wrote:
>
>
> Windows Defender Firewall can block applications. Without realizing the impact you might have clicked yes to a
> prompt that disabled APCC from being able to access the web. There is not much else that could prevent APCC
> from doing a simple HTML request. I guess maybe it could be that you need to update windows or haven't updated
> an optional update related to .Net framework.
>
> -Ray Gralak
> Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> Author of PEMPro V3:  https://www.ccdware.com
> Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>
>
> > -----Original Message-----
> > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via Groups.Io
> > Sent: Friday, March 20, 2020 10:37 AM
> > To: main@ap-gto.groups.io
> > Subject: Re: [ap-gto] APCC rate settings
> >
> > Hi Ray
> >  I don't have any purchased AV on my Win10. Unless you mean whatever AV that comes standard on Win10?
> >
> > cytan
> >
> > On Friday, March 20, 2020, 12:33:02 PM CDT, Ray Gralak <groups3@...> wrote:
> >
> >
> > Okay, then maybe your anti-virus application is blocking APCC from sending anything off your computer.
> >
> > Try turning AV off then try again.
> >
> > -Ray Gralak
> > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> > Author of PEMPro V3:  https://www.ccdware.com
> > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> >
> >
> > > -----Original Message-----
> > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via Groups.Io
> > > Sent: Friday, March 20, 2020 9:45 AM
> > > To: main@ap-gto.groups.io
> > > Subject: Re: [ap-gto] APCC rate settings
> > >
> > > Hi Ray
> > >    I can see https://www.siriusimaging.com, <https://www.siriusimaging.com,>
> <https://www.siriusimaging.com,> but 1.8.0.4 does not see the
> > update.
> > >
> > > cytan
> > >
> > > On Friday, March 20, 2020, 11:27:28 AM CDT, Ray Gralak <groups3@...> wrote:
> > >
> > >
> > > No connection is required.
> > >
> > > You're computer/browser must be able to access https://www.siriusimaging.com.
> > >
> > > -Ray Gralak
> > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> > > Author of PEMPro V3:  https://www.ccdware.com
> > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> > >
> > >
> > > > -----Original Message-----
> > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Konstantin von
> > > > Sent: Friday, March 20, 2020 8:16 AM
> > > > To: main@ap-gto.groups.io
> > > > Subject: Re: [ap-gto] APCC rate settings
> > > >
> > > > Hi Ray,
> > > >
> > > > I ran APCC Pro 1.8.0.5. When I check for updates I get the answer No updates to APCC are available. Do I
> > have
> > > > to be connected to a mount?
> > > >
> > > > Konstantin
> > > >
> > > >
> > > > Konstantin v. Poschinger
> > > >
> > > > Hammerichstr. 5
> > > > 22605 Hamburg
> > > > 040/8805747
> > > > 0171 1983476
> > > >
> > > >
> > > >    Am 20.03.2020 um 05:32 schrieb Ray Gralak <groups3@...>:
> > > >
> > > >    Hi Brian,
> > > >
> > > >    When you run APCC it will indicate a new version is available in the title. Then from APCC's help menu
> > > > you can use Check for updates to get the download link.
> > > >
> > > >    -Ray Gralak
> > > >    Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> > > >    Author of PEMPro V3:  https://www.ccdware.com <https://www.ccdware.com> <https://www.ccdware.com>
> <https://www.ccdware.com>
> > <https://www.ccdware.com/>
> > > >    Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> > > >
> > > >
> > > >
> > > >
> > > >        -----Original Message-----
> > > >        From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Brian Valente
> > > >        Sent: Thursday, March 19, 2020 8:39 PM
> > > >        To: main@ap-gto.groups.io
> > > >        Subject: Re: [ap-gto] APCC rate settings
> > > >
> > > >        Ray where can we download this latest version?
> > > >
> > > >        AP site only has link to 1.8.0.5 right now
> > > >
> > > >        thanks -Brian
> > > >
> > > >        On Thu, Mar 19, 2020 at 8:21 PM Ray Gralak <groups3@...> wrote:
> > > >
> > > >
> > > >        > Running APPC 1.8.0.4  with GTO4 on my Mach1 it appears there are only four rate settings now;
> > > > formerly
> > > >        there
> > > >        > were several more?
> > > >
> > > >        That was fixed in 1.8.0.8/9.
> > > >
> > > >        -Ray Gralak
> > > >        Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> > > >        Author of PEMPro V3:  https://www.ccdware.com
> > > >        Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> > > >
> > > >
> > > >        > -----Original Message-----
> > > >        > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Peter Bresler via
> > > > Groups.Io
> > > >        > Sent: Thursday, March 19, 2020 8:11 PM
> > > >        > To: main@ap-gto.groups.io
> > > >        > Subject: [ap-gto] APCC rate settings
> > > >        >
> > > >        > Running APPC 1.8.0.4  with GTO4 on my Mach1 it appears there are only four rate settings now;
> > > > formerly
> > > >        there
> > > >        > were several more?
> > > >        >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >        --
> > > >
> > > >        Brian
> > > >
> > > >
> > > >
> > > >        Brian Valente
> > > >        portfolio brianvalentephotography.com <http://brianvalentephotography.com/>
> > > > <http://brianvalentephotography.com <http://brianvalentephotography.com>
> <http://brianvalentephotography.com>
> > <http://brianvalentephotography.com>
> > > <http://brianvalentephotography.com/> >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
>
>
>
>
>






--
Brian 



Brian Valente


Re: APCC rate settings

Ray Gralak
 

Brian and cytan,

1. I am wondering if you have IPV4 enabled on your LAN port?

2. Have you applied all Windows updates and especially all optional updates having to do with .Net framework?

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Brian Valente
Sent: Friday, March 20, 2020 7:27 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] APCC rate settings

fwiw mine reported no updates either, but i'm not too worried about it. i'll watch for updates here

On Fri, Mar 20, 2020 at 6:58 PM Cheng-Yang Tan via Groups.Io <cytan299=yahoo.com@groups.io> wrote:


Hi Ray,
I added APCC to the firewall but the problem remains:
Inline image

cytan



On Friday, March 20, 2020, 08:49:09 PM CDT, Ray Gralak <groups3@gralak.com> wrote:


> I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?

AstroPhysicsCommandCenter.exe

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


> -----Original Message-----
> From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via
Groups.Io
> Sent: Friday, March 20, 2020 10:55 AM
> To: main@ap-gto.groups.io
> Subject: Re: [ap-gto] APCC rate settings
>
> Hi Ray,
> Sorry for being dumber than rocks when it comes to Windows stuff. I'm more of a dumber than rocks
Mac user :)
> Here's the screen shot for the firewall settings on my Win 10:
>
> Inline image
>
> I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?
>
> cytan
>
>
>
> On Friday, March 20, 2020, 12:49:39 PM CDT, Ray Gralak <groups3@gralak.com> wrote:
>
>
> Windows Defender Firewall can block applications. Without realizing the impact you might have clicked
yes to a
> prompt that disabled APCC from being able to access the web. There is not much else that could prevent
APCC
> from doing a simple HTML request. I guess maybe it could be that you need to update windows or haven't
updated
> an optional update related to .Net framework.
>
> -Ray Gralak
> Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> Author of PEMPro V3: https://www.ccdware.com
> Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>
>
> > -----Original Message-----
> > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via
Groups.Io
> > Sent: Friday, March 20, 2020 10:37 AM
> > To: main@ap-gto.groups.io
> > Subject: Re: [ap-gto] APCC rate settings
> >
> > Hi Ray
> > I don't have any purchased AV on my Win10. Unless you mean whatever AV that comes standard on
Win10?
> >
> > cytan
> >
> > On Friday, March 20, 2020, 12:33:02 PM CDT, Ray Gralak <groups3@gralak.com> wrote:
> >
> >
> > Okay, then maybe your anti-virus application is blocking APCC from sending anything off your
computer.
> >
> > Try turning AV off then try again.
> >
> > -Ray Gralak
> > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> > Author of PEMPro V3: https://www.ccdware.com
> > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> >
> >
> > > -----Original Message-----
> > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via
Groups.Io
> > > Sent: Friday, March 20, 2020 9:45 AM
> > > To: main@ap-gto.groups.io
> > > Subject: Re: [ap-gto] APCC rate settings
> > >
> > > Hi Ray
> > > I can see https://www.siriusimaging.com, <https://www.siriusimaging.com,>
<https://www.siriusimaging.com,>
> <https://www.siriusimaging.com,> but 1.8.0.4 does not see the
> > update.
> > >
> > > cytan
> > >
> > > On Friday, March 20, 2020, 11:27:28 AM CDT, Ray Gralak <groups3@gralak.com> wrote:
> > >
> > >
> > > No connection is required.
> > >
> > > You're computer/browser must be able to access https://www.siriusimaging.com.
> > >
> > > -Ray Gralak
> > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> > > Author of PEMPro V3: https://www.ccdware.com
> > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> > >
> > >
> > > > -----Original Message-----
> > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Konstantin von
> > > > Sent: Friday, March 20, 2020 8:16 AM
> > > > To: main@ap-gto.groups.io
> > > > Subject: Re: [ap-gto] APCC rate settings
> > > >
> > > > Hi Ray,
> > > >
> > > > I ran APCC Pro 1.8.0.5. When I check for updates I get the answer No updates to APCC are
available. Do I
> > have
> > > > to be connected to a mount?
> > > >
> > > > Konstantin
> > > >
> > > >
> > > > Konstantin v. Poschinger
> > > >
> > > > Hammerichstr. 5
> > > > 22605 Hamburg
> > > > 040/8805747
> > > > 0171 1983476
> > > >
> > > >
> > > > Am 20.03.2020 um 05:32 schrieb Ray Gralak <groups3@gralak.com>:
> > > >
> > > > Hi Brian,
> > > >
> > > > When you run APCC it will indicate a new version is available in the title. Then from APCC's help
menu
> > > > you can use Check for updates to get the download link.
> > > >
> > > > -Ray Gralak
> > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> > > > Author of PEMPro V3: https://www.ccdware.com <https://www.ccdware.com>
<https://www.ccdware.com> <https://www.ccdware.com>
> <https://www.ccdware.com>
> > <https://www.ccdware.com/>
> > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> > > >
> > > >
> > > >
> > > >
> > > > -----Original Message-----
> > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Brian Valente
> > > > Sent: Thursday, March 19, 2020 8:39 PM
> > > > To: main@ap-gto.groups.io
> > > > Subject: Re: [ap-gto] APCC rate settings
> > > >
> > > > Ray where can we download this latest version?
> > > >
> > > > AP site only has link to 1.8.0.5 right now
> > > >
> > > > thanks -Brian
> > > >
> > > > On Thu, Mar 19, 2020 at 8:21 PM Ray Gralak <groups3@gralak.com> wrote:
> > > >
> > > >
> > > > > Running APPC 1.8.0.4 with GTO4 on my Mach1 it appears there are only four rate settings
now;
> > > > formerly
> > > > there
> > > > > were several more?
> > > >
> > > > That was fixed in 1.8.0.8/9.
> > > >
> > > > -Ray Gralak
> > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> > > > Author of PEMPro V3: https://www.ccdware.com
> > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> > > >
> > > >
> > > > > -----Original Message-----
> > > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Peter Bresler via
> > > > Groups.Io
> > > > > Sent: Thursday, March 19, 2020 8:11 PM
> > > > > To: main@ap-gto.groups.io
> > > > > Subject: [ap-gto] APCC rate settings
> > > > >
> > > > > Running APPC 1.8.0.4 with GTO4 on my Mach1 it appears there are only four rate settings
now;
> > > > formerly
> > > > there
> > > > > were several more?
> > > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > --
> > > >
> > > > Brian
> > > >
> > > >
> > > >
> > > > Brian Valente
> > > > portfolio brianvalentephotography.com <http://brianvalentephotography.com/>
> > > > <http://brianvalentephotography.com <http://brianvalentephotography.com>
<http://brianvalentephotography.com>
> <http://brianvalentephotography.com>
> > <http://brianvalentephotography.com>
> > > <http://brianvalentephotography.com/> >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
>
>
>
>
>












--

Brian



Brian Valente
portfolio brianvalentephotography.com <http://brianvalentephotography.com>


Re: APCC rate settings

 

agreed :)


On Fri, Mar 20, 2020 at 7:29 PM Cheng-Yang Tan via Groups.Io <cytan299=yahoo.com@groups.io> wrote:
Hi Brian,
  I'm not worried about it. But it _is_ curious ...
cytan

On Friday, March 20, 2020, 09:27:28 PM CDT, Brian Valente <bvalente@...> wrote:


fwiw mine reported no updates either, but i'm not too worried about it. i'll watch for updates here




--
Brian 



Brian Valente


Re: APCC rate settings

Cheng-Yang Tan
 

Hi Brian,
  I'm not worried about it. But it _is_ curious ...
cytan

On Friday, March 20, 2020, 09:27:28 PM CDT, Brian Valente <bvalente@...> wrote:


fwiw mine reported no updates either, but i'm not too worried about it. i'll watch for updates here



Re: APCC rate settings

 

fwiw mine reported no updates either, but i'm not too worried about it. i'll watch for updates here


On Fri, Mar 20, 2020 at 6:58 PM Cheng-Yang Tan via Groups.Io <cytan299=yahoo.com@groups.io> wrote:
Hi Ray,
   I added APCC to the firewall but the problem remains:
Inline image

cytan


On Friday, March 20, 2020, 08:49:09 PM CDT, Ray Gralak <groups3@...> wrote:


> I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?

AstroPhysicsCommandCenter.exe

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3:  https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


> -----Original Message-----
> From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via Groups.Io
> Sent: Friday, March 20, 2020 10:55 AM
> To: main@ap-gto.groups.io
> Subject: Re: [ap-gto] APCC rate settings
>
> Hi Ray,
>    Sorry for being dumber than rocks when it comes to Windows stuff. I'm more of a dumber than rocks Mac user :)
> Here's the screen shot for the firewall settings on my Win 10:
>
> Inline image
>
> I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?
>
> cytan
>
>
>
> On Friday, March 20, 2020, 12:49:39 PM CDT, Ray Gralak <groups3@...> wrote:
>
>
> Windows Defender Firewall can block applications. Without realizing the impact you might have clicked yes to a
> prompt that disabled APCC from being able to access the web. There is not much else that could prevent APCC
> from doing a simple HTML request. I guess maybe it could be that you need to update windows or haven't updated
> an optional update related to .Net framework.
>
> -Ray Gralak
> Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> Author of PEMPro V3:  https://www.ccdware.com
> Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>
>
> > -----Original Message-----
> > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via Groups.Io
> > Sent: Friday, March 20, 2020 10:37 AM
> > To: main@ap-gto.groups.io
> > Subject: Re: [ap-gto] APCC rate settings
> >
> > Hi Ray
> >  I don't have any purchased AV on my Win10. Unless you mean whatever AV that comes standard on Win10?
> >
> > cytan
> >
> > On Friday, March 20, 2020, 12:33:02 PM CDT, Ray Gralak <groups3@...> wrote:
> >
> >
> > Okay, then maybe your anti-virus application is blocking APCC from sending anything off your computer.
> >
> > Try turning AV off then try again.
> >
> > -Ray Gralak
> > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> > Author of PEMPro V3:  https://www.ccdware.com
> > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> >
> >
> > > -----Original Message-----
> > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via Groups.Io
> > > Sent: Friday, March 20, 2020 9:45 AM
> > > To: main@ap-gto.groups.io
> > > Subject: Re: [ap-gto] APCC rate settings
> > >
> > > Hi Ray
> > >    I can see https://www.siriusimaging.com, <https://www.siriusimaging.com,>
> <https://www.siriusimaging.com,> but 1.8.0.4 does not see the
> > update.
> > >
> > > cytan
> > >
> > > On Friday, March 20, 2020, 11:27:28 AM CDT, Ray Gralak <groups3@...> wrote:
> > >
> > >
> > > No connection is required.
> > >
> > > You're computer/browser must be able to access https://www.siriusimaging.com.
> > >
> > > -Ray Gralak
> > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> > > Author of PEMPro V3:  https://www.ccdware.com
> > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> > >
> > >
> > > > -----Original Message-----
> > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Konstantin von
> > > > Sent: Friday, March 20, 2020 8:16 AM
> > > > To: main@ap-gto.groups.io
> > > > Subject: Re: [ap-gto] APCC rate settings
> > > >
> > > > Hi Ray,
> > > >
> > > > I ran APCC Pro 1.8.0.5. When I check for updates I get the answer No updates to APCC are available. Do I
> > have
> > > > to be connected to a mount?
> > > >
> > > > Konstantin
> > > >
> > > >
> > > > Konstantin v. Poschinger
> > > >
> > > > Hammerichstr. 5
> > > > 22605 Hamburg
> > > > 040/8805747
> > > > 0171 1983476
> > > >
> > > >
> > > >    Am 20.03.2020 um 05:32 schrieb Ray Gralak <groups3@...>:
> > > >
> > > >    Hi Brian,
> > > >
> > > >    When you run APCC it will indicate a new version is available in the title. Then from APCC's help menu
> > > > you can use Check for updates to get the download link.
> > > >
> > > >    -Ray Gralak
> > > >    Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> > > >    Author of PEMPro V3:  https://www.ccdware.com <https://www.ccdware.com> <https://www.ccdware.com>
> <https://www.ccdware.com>
> > <https://www.ccdware.com/>
> > > >    Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> > > >
> > > >
> > > >
> > > >
> > > >        -----Original Message-----
> > > >        From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Brian Valente
> > > >        Sent: Thursday, March 19, 2020 8:39 PM
> > > >        To: main@ap-gto.groups.io
> > > >        Subject: Re: [ap-gto] APCC rate settings
> > > >
> > > >        Ray where can we download this latest version?
> > > >
> > > >        AP site only has link to 1.8.0.5 right now
> > > >
> > > >        thanks -Brian
> > > >
> > > >        On Thu, Mar 19, 2020 at 8:21 PM Ray Gralak <groups3@...> wrote:
> > > >
> > > >
> > > >        > Running APPC 1.8.0.4  with GTO4 on my Mach1 it appears there are only four rate settings now;
> > > > formerly
> > > >        there
> > > >        > were several more?
> > > >
> > > >        That was fixed in 1.8.0.8/9.
> > > >
> > > >        -Ray Gralak
> > > >        Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> > > >        Author of PEMPro V3:  https://www.ccdware.com
> > > >        Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> > > >
> > > >
> > > >        > -----Original Message-----
> > > >        > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Peter Bresler via
> > > > Groups.Io
> > > >        > Sent: Thursday, March 19, 2020 8:11 PM
> > > >        > To: main@ap-gto.groups.io
> > > >        > Subject: [ap-gto] APCC rate settings
> > > >        >
> > > >        > Running APPC 1.8.0.4  with GTO4 on my Mach1 it appears there are only four rate settings now;
> > > > formerly
> > > >        there
> > > >        > were several more?
> > > >        >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >        --
> > > >
> > > >        Brian
> > > >
> > > >
> > > >
> > > >        Brian Valente
> > > >        portfolio brianvalentephotography.com <http://brianvalentephotography.com/>
> > > > <http://brianvalentephotography.com <http://brianvalentephotography.com>
> <http://brianvalentephotography.com>
> > <http://brianvalentephotography.com>
> > > <http://brianvalentephotography.com/> >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
>
>
>
>
>






--
Brian 



Brian Valente


Re: APCC rate settings

Ray Gralak
 

Cytan,

I can't explain why your computer or network is (probably) not passing the request to the website.

Can you email your IP address privately to me (don't post it here) and I'll look to see if there have been any requests from that IP address?

Email me at groups3 at gralak dot com.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via Groups.Io
Sent: Friday, March 20, 2020 6:58 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] APCC rate settings

Hi Ray,
I added APCC to the firewall but the problem remains:
Inline image

cytan



On Friday, March 20, 2020, 08:49:09 PM CDT, Ray Gralak <groups3@gralak.com> wrote:


I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?
AstroPhysicsCommandCenter.exe

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via Groups.Io
Sent: Friday, March 20, 2020 10:55 AM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] APCC rate settings

Hi Ray,
Sorry for being dumber than rocks when it comes to Windows stuff. I'm more of a dumber than rocks Mac user
:)
Here's the screen shot for the firewall settings on my Win 10:

Inline image

I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?

cytan



On Friday, March 20, 2020, 12:49:39 PM CDT, Ray Gralak <groups3@gralak.com> wrote:


Windows Defender Firewall can block applications. Without realizing the impact you might have clicked yes to a
prompt that disabled APCC from being able to access the web. There is not much else that could prevent APCC
from doing a simple HTML request. I guess maybe it could be that you need to update windows or haven't
updated
an optional update related to .Net framework.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via Groups.Io
Sent: Friday, March 20, 2020 10:37 AM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] APCC rate settings

Hi Ray
I don't have any purchased AV on my Win10. Unless you mean whatever AV that comes standard on Win10?

cytan

On Friday, March 20, 2020, 12:33:02 PM CDT, Ray Gralak <groups3@gralak.com> wrote:


Okay, then maybe your anti-virus application is blocking APCC from sending anything off your computer.

Try turning AV off then try again.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via Groups.Io
Sent: Friday, March 20, 2020 9:45 AM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] APCC rate settings

Hi Ray
I can see https://www.siriusimaging.com, <https://www.siriusimaging.com,>
<https://www.siriusimaging.com,>
<https://www.siriusimaging.com,> but 1.8.0.4 does not see the
update.

cytan

On Friday, March 20, 2020, 11:27:28 AM CDT, Ray Gralak <groups3@gralak.com> wrote:


No connection is required.

You're computer/browser must be able to access https://www.siriusimaging.com.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Konstantin von
Sent: Friday, March 20, 2020 8:16 AM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] APCC rate settings

Hi Ray,

I ran APCC Pro 1.8.0.5. When I check for updates I get the answer No updates to APCC are available. Do I
have
to be connected to a mount?

Konstantin


Konstantin v. Poschinger

Hammerichstr. 5
22605 Hamburg
040/8805747
0171 1983476


Am 20.03.2020 um 05:32 schrieb Ray Gralak <groups3@gralak.com>:

Hi Brian,

When you run APCC it will indicate a new version is available in the title. Then from APCC's help menu
you can use Check for updates to get the download link.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com <https://www.ccdware.com>
<https://www.ccdware.com> <https://www.ccdware.com>
<https://www.ccdware.com>
<https://www.ccdware.com/>
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver




-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Brian Valente
Sent: Thursday, March 19, 2020 8:39 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] APCC rate settings

Ray where can we download this latest version?

AP site only has link to 1.8.0.5 right now

thanks -Brian

On Thu, Mar 19, 2020 at 8:21 PM Ray Gralak <groups3@gralak.com> wrote:


> Running APPC 1.8.0.4 with GTO4 on my Mach1 it appears there are only four rate settings now;
formerly
there
> were several more?

That was fixed in 1.8.0.8/9.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


> -----Original Message-----
> From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Peter Bresler via
Groups.Io
> Sent: Thursday, March 19, 2020 8:11 PM
> To: main@ap-gto.groups.io
> Subject: [ap-gto] APCC rate settings
>
> Running APPC 1.8.0.4 with GTO4 on my Mach1 it appears there are only four rate settings now;
formerly
there
> were several more?
>








--

Brian



Brian Valente
portfolio brianvalentephotography.com <http://brianvalentephotography.com/>
<http://brianvalentephotography.com <http://brianvalentephotography.com>
<http://brianvalentephotography.com>
<http://brianvalentephotography.com>
<http://brianvalentephotography.com>
<http://brianvalentephotography.com/> >
























Re: APPM Model Creation Problem

Ray Gralak
 

Wayne,

I don't know for sure if the custom limits will work perfectly for your scope's view of the sky. You can always create a custom list of points if you needed, but you should try to create an automated list first. You can then export the points and manually remove the problematic ones.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Wayne Hixson via Groups.Io
Sent: Friday, March 20, 2020 4:51 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] APPM Model Creation Problem

Ray, think I figured out I’ve been doing the meridians wrong! I think I need to run the west limits except I move the
scope East to the point it’s not going under the eaves. So the west limits show up on the east side. Right? Then
use the East limits for the more typical counterweights up run camera into the pier situation. Anyway I’m starting
the mapping anew.


I’m also Remapping the altitude limits so that will be used to stop tracking when the camera starts to track under
the eaves.

does this sound like it will work?

Wayne


Re: APPM Model Creation Problem

Ray Gralak
 

Wayne,

APPM turns off the Horizon/Meridian limits when it starts and turns them on again when stopped or finished.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Wayne Hixson via Groups.Io
Sent: Friday, March 20, 2020 12:44 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] APPM Model Creation Problem

Discovered one issue - the plotter ignores my meridian limits and insists on pointing to the zenith/meridian from
the west side, which looks straight up into the eaves of my roof. In fact it appears APMM insists on turning off the
meridian tracking limits box. Any way to force the model to image from the east side?


Re: APCC rate settings

Cheng-Yang Tan
 

Hi Ray,
   I added APCC to the firewall but the problem remains:
Inline image

cytan


On Friday, March 20, 2020, 08:49:09 PM CDT, Ray Gralak <groups3@...> wrote:


> I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?

AstroPhysicsCommandCenter.exe

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3:  https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


> -----Original Message-----
> From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via Groups.Io
> Sent: Friday, March 20, 2020 10:55 AM
> To: main@ap-gto.groups.io
> Subject: Re: [ap-gto] APCC rate settings
>
> Hi Ray,
>    Sorry for being dumber than rocks when it comes to Windows stuff. I'm more of a dumber than rocks Mac user :)
> Here's the screen shot for the firewall settings on my Win 10:
>
> Inline image
>
> I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?
>
> cytan
>
>
>
> On Friday, March 20, 2020, 12:49:39 PM CDT, Ray Gralak <groups3@...> wrote:
>
>
> Windows Defender Firewall can block applications. Without realizing the impact you might have clicked yes to a
> prompt that disabled APCC from being able to access the web. There is not much else that could prevent APCC
> from doing a simple HTML request. I guess maybe it could be that you need to update windows or haven't updated
> an optional update related to .Net framework.
>
> -Ray Gralak
> Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> Author of PEMPro V3:  https://www.ccdware.com
> Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>
>
> > -----Original Message-----
> > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via Groups.Io
> > Sent: Friday, March 20, 2020 10:37 AM
> > To: main@ap-gto.groups.io
> > Subject: Re: [ap-gto] APCC rate settings
> >
> > Hi Ray
> >  I don't have any purchased AV on my Win10. Unless you mean whatever AV that comes standard on Win10?
> >
> > cytan
> >
> > On Friday, March 20, 2020, 12:33:02 PM CDT, Ray Gralak <groups3@...> wrote:
> >
> >
> > Okay, then maybe your anti-virus application is blocking APCC from sending anything off your computer.
> >
> > Try turning AV off then try again.
> >
> > -Ray Gralak
> > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> > Author of PEMPro V3:  https://www.ccdware.com
> > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> >
> >
> > > -----Original Message-----
> > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via Groups.Io
> > > Sent: Friday, March 20, 2020 9:45 AM
> > > To: main@ap-gto.groups.io
> > > Subject: Re: [ap-gto] APCC rate settings
> > >
> > > Hi Ray
> > >    I can see https://www.siriusimaging.com, <https://www.siriusimaging.com,>
> <https://www.siriusimaging.com,> but 1.8.0.4 does not see the
> > update.
> > >
> > > cytan
> > >
> > > On Friday, March 20, 2020, 11:27:28 AM CDT, Ray Gralak <groups3@...> wrote:
> > >
> > >
> > > No connection is required.
> > >
> > > You're computer/browser must be able to access https://www.siriusimaging.com.
> > >
> > > -Ray Gralak
> > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> > > Author of PEMPro V3:  https://www.ccdware.com
> > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> > >
> > >
> > > > -----Original Message-----
> > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Konstantin von
> > > > Sent: Friday, March 20, 2020 8:16 AM
> > > > To: main@ap-gto.groups.io
> > > > Subject: Re: [ap-gto] APCC rate settings
> > > >
> > > > Hi Ray,
> > > >
> > > > I ran APCC Pro 1.8.0.5. When I check for updates I get the answer No updates to APCC are available. Do I
> > have
> > > > to be connected to a mount?
> > > >
> > > > Konstantin
> > > >
> > > >
> > > > Konstantin v. Poschinger
> > > >
> > > > Hammerichstr. 5
> > > > 22605 Hamburg
> > > > 040/8805747
> > > > 0171 1983476
> > > >
> > > >
> > > >    Am 20.03.2020 um 05:32 schrieb Ray Gralak <groups3@...>:
> > > >
> > > >    Hi Brian,
> > > >
> > > >    When you run APCC it will indicate a new version is available in the title. Then from APCC's help menu
> > > > you can use Check for updates to get the download link.
> > > >
> > > >    -Ray Gralak
> > > >    Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> > > >    Author of PEMPro V3:  https://www.ccdware.com <https://www.ccdware.com> <https://www.ccdware.com>
> <https://www.ccdware.com>
> > <https://www.ccdware.com/>
> > > >    Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> > > >
> > > >
> > > >
> > > >
> > > >        -----Original Message-----
> > > >        From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Brian Valente
> > > >        Sent: Thursday, March 19, 2020 8:39 PM
> > > >        To: main@ap-gto.groups.io
> > > >        Subject: Re: [ap-gto] APCC rate settings
> > > >
> > > >        Ray where can we download this latest version?
> > > >
> > > >        AP site only has link to 1.8.0.5 right now
> > > >
> > > >        thanks -Brian
> > > >
> > > >        On Thu, Mar 19, 2020 at 8:21 PM Ray Gralak <groups3@...> wrote:
> > > >
> > > >
> > > >        > Running APPC 1.8.0.4  with GTO4 on my Mach1 it appears there are only four rate settings now;
> > > > formerly
> > > >        there
> > > >        > were several more?
> > > >
> > > >        That was fixed in 1.8.0.8/9.
> > > >
> > > >        -Ray Gralak
> > > >        Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> > > >        Author of PEMPro V3:  https://www.ccdware.com
> > > >        Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> > > >
> > > >
> > > >        > -----Original Message-----
> > > >        > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Peter Bresler via
> > > > Groups.Io
> > > >        > Sent: Thursday, March 19, 2020 8:11 PM
> > > >        > To: main@ap-gto.groups.io
> > > >        > Subject: [ap-gto] APCC rate settings
> > > >        >
> > > >        > Running APPC 1.8.0.4  with GTO4 on my Mach1 it appears there are only four rate settings now;
> > > > formerly
> > > >        there
> > > >        > were several more?
> > > >        >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >        --
> > > >
> > > >        Brian
> > > >
> > > >
> > > >
> > > >        Brian Valente
> > > >        portfolio brianvalentephotography.com <http://brianvalentephotography.com/>
> > > > <http://brianvalentephotography.com <http://brianvalentephotography.com>
> <http://brianvalentephotography.com>
> > <http://brianvalentephotography.com>
> > > <http://brianvalentephotography.com/> >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
>
>
>
>
>





Re: APPM Model Creation Problem

Bill Long
 

Cool feature! 🙂 


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Ray Gralak <groups3@...>
Sent: Friday, March 20, 2020 6:54 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] APPM Model Creation Problem
 
> Wow that NASA Sky View camera works great - successfully running a model IN THE DAYTIME!! Will save me a
> lot of time. 😂😂😂

:-)

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-pro&amp;data=02%7C01%7C%7Cd74ee408d4df4c73909d08d7cd3ac577%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203524604815125&amp;sdata=xe05%2B8WEsdpeFDSee8kXcjB8hmImzGEd0KNTicaUDog%3D&amp;reserved=0
Author of PEMPro V3:  https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com&amp;data=02%7C01%7C%7Cd74ee408d4df4c73909d08d7cd3ac577%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203524604815125&amp;sdata=tW8jZtK8v%2B6GxChEaUEniyOU7QRn6ZhixYpRHegQEXU%3D&amp;reserved=0
Author of Astro-Physics V2 ASCOM Driver: https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&amp;data=02%7C01%7C%7Cd74ee408d4df4c73909d08d7cd3ac577%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203524604815125&amp;sdata=lLiAvYpdOiru2X%2BRbvQg3bNrvltT0TRSs6EezYP1GyQ%3D&amp;reserved=0


> -----Original Message-----
> From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Wayne Hixson via Groups.Io
> Sent: Friday, March 20, 2020 12:28 PM
> To: main@ap-gto.groups.io
> Subject: Re: [ap-gto] APPM Model Creation Problem
>
> Wow that NASA Sky View camera works great - successfully running a model IN THE DAYTIME!! Will save me a
> lot of time. 😂😂😂
>





Re: APPM Model Creation Problem

Ray Gralak
 

Wow that NASA Sky View camera works great - successfully running a model IN THE DAYTIME!! Will save me a
lot of time. 😂😂😂
:-)

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Wayne Hixson via Groups.Io
Sent: Friday, March 20, 2020 12:28 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] APPM Model Creation Problem

Wow that NASA Sky View camera works great - successfully running a model IN THE DAYTIME!! Will save me a
lot of time. 😂😂😂


Re: APPM Model Creation Problem

Ray Gralak
 

Ray, would the fact that I'm using a OSC camera with Bayer matrix make a difference?
Wayne, no that won't make a difference.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Wayne Hixson via Groups.Io
Sent: Friday, March 20, 2020 11:46 AM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] APPM Model Creation Problem

Ray, would the fact that I'm using a OSC camera with Bayer matrix make a difference?

Wayne Hixson, Stargazer
<http://us.i1.yimg.com/us.yimg.com/i/mesg/tsmileys2/04.gif>


On Friday, March 20, 2020, 08:41:05 AM PDT, Ray Gralak <groups3@gralak.com> wrote:


Wayne,

Assuming you have set up image scale accurately in APPM have you tried setting up All Sky plate solving as a
backup for when the normal plate solve fails? It's an option in APPM's plate solve tab. This helps if the problem is
just that the mount coordinates are not very close to sky coordinates.

There is also a feature in APPM to perform test plate solves on the plate solve tab. You can use that to make sure
plate solving is working since each plate solver is different. If you are using APCC 1.8.0.9 you can set the camera
type in APPM to "NASA Sky View" for daytime testing. It will download an image in the proper image scale using
the mount's RA/Dec pointing position. Not many people seem to know about that. :-)

Anyway, that's all I can think of for now. I'm probably not going to be available again until this evening, but I can
help you more at that time if you still can't get any further. In that case It would be great if you could use APCC's
log zipper to capture logs and send me a private email with a dropbox link to the zip file.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Wayne Hixson via Groups.Io
Sent: Thursday, March 19, 2020 10:08 PM
To: main@ap-gto.groups.io
Subject: [ap-gto] APPM Model Creation Problem

Hi Ray, trying to create a simple model with my Horizon and Meridian limits turned on. It generates a set of
points
but fails every solve. When I manually try a solve in APPM (using Pinpoint) I get this message:


Plate Solve failed!

The plate's exposure start time is required for catalog proper motion calculation. Check the attached image.

What do I need to do?

Wayne



9381 - 9400 of 78584