Date   

Re: AP Eagle for 8-10"

Bill Long
 

Ah okay, I am an imager and dont do visual. 


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of thefamily90 Phillips <thefamily90@...>
Sent: Friday, May 15, 2020 10:34 AM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] AP Eagle for 8-10"
 
Seated looking at/near Zenith with diagonal the eyepiece height might be perfect


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Bill Long <bill@...>
Sent: Friday, May 15, 2020 1:18:50 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] AP Eagle for 8-10"
 
I think the Eagle is fine without the extension on it. Why do you need 8 more inches? 


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Dominique Durand via groups.io <dom33.durand@...>
Sent: Friday, May 15, 2020 10:17 AM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] AP Eagle for 8-10"
 
For a refractor it is the position which seems to me the most suitable. I have the same Eagle + mach1 installation and an AP130 or C11 on it, but I have an 8 "extension.


Re: AP Eagle for 8-10"

thefamily90 Phillips
 

Seated looking at/near Zenith with diagonal the eyepiece height might be perfect


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Bill Long <bill@...>
Sent: Friday, May 15, 2020 1:18:50 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] AP Eagle for 8-10"
 
I think the Eagle is fine without the extension on it. Why do you need 8 more inches? 


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Dominique Durand via groups.io <dom33.durand@...>
Sent: Friday, May 15, 2020 10:17 AM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] AP Eagle for 8-10"
 
For a refractor it is the position which seems to me the most suitable. I have the same Eagle + mach1 installation and an AP130 or C11 on it, but I have an 8 "extension.


Re: AP Eagle for 8-10"

Bill Long
 

I think the Eagle is fine without the extension on it. Why do you need 8 more inches? 


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Dominique Durand via groups.io <dom33.durand@...>
Sent: Friday, May 15, 2020 10:17 AM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] AP Eagle for 8-10"
 
For a refractor it is the position which seems to me the most suitable. I have the same Eagle + mach1 installation and an AP130 or C11 on it, but I have an 8 "extension.


Re: AP Eagle for 8-10"

Dominique Durand
 
Edited

For a refractor it is the position which seems to me the most suitable. I have the same Eagle + mach1 installation and an AP130 or C11 on it, but I have an 8 "extension.
It is comfortable for the visual.


Re: AP Eagle for 8-10"

Bill Long
 

I put mine in the highest position I could. 

Did I do it wrong?




From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Dominique Durand via groups.io <dom33.durand@...>
Sent: Friday, May 15, 2020 9:23 AM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] AP Eagle for 8-10"
 
For refractors, you have to put the Eagle in high position, as on the example on Youtube.


Re: Error message in APCC with sync command in TheSkyX Pro #APCC

Ray Gralak
 

Hi Juergen,

I am not able to reproduce the problem so I am wondering if the decimal point is a comma (e.g. 32,5 == 32 and 1/2)? If so can you try switching the "," and "." on your Windows system?

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Juergen Riedmeier
Sent: Friday, May 15, 2020 3:41 AM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] Error message in APCC with sync command in TheSkyX Pro #APCC

Hi Ray
many thanks for the quick answer.


My current versions are as described above:
Mount: AP 1200GTO with GTOCP3 Control Box (V1 Chip)
APCC Standard v1.8.0.4 / Ascom AP V2 Driver v5.30.10
The SkyX Pro version 10.5.0 (build 12503)
Selected mount setup in “TheSkyX Pro”: AstroPhysics GTO Ascom V2 Mount
Ascom Platform 6.4 Build 6.4.1.2695

TheSkyX Pro connects to the AP V2 driver (clients: 2/0)
see attached pictures.
Regards
Jürgen




Re: AP Eagle for 8-10"

Dominique Durand
 
Edited

For refractors, you have to put the Eagle in high position, as on the example on Youtube.

Dominique


Re: Computer crahsed, mount crashed into itself

 

Hello Dan,

Don't panic yet. Please call the number below and ask for George to assist you.

Clear Skies,

Marj Christen
Astro-Physics, Inc
11250 Forest Hills Rd
Machesney Park, IL 61115
Phone: 815-282-1513
Fax: 815-282-9847
www.astro-physics.com

-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Dan via groups.io
Sent: Friday, May 15, 2020 7:05 AM
To: main@ap-gto.groups.io
Subject: [ap-gto] Computer crahsed, mount crashed into itself

Help! I am scanning manuals but I can't find what I am looking for. Computer crashed, fount the mount had crashed into itself. The light was red (can't remember what color it is supposed to be)
The mount is acting funny slew speeds when moving it and parking it change. Going from the 1200 I Have it set to my guess is around 500.

How bad did I destroy this mount? How else can I test this?

- Dan


Re: AP Eagle for 8-10"

Bill Long
 

That would be a no for me. Looks weird too. 


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of stlrvus <jmagsaysay58@...>
Sent: Friday, May 15, 2020 7:21 AM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] AP Eagle for 8-10"
 
I had an adapter made for mine.  Works perfectly.  Never had a problem. 


Re: AP Eagle for 8-10"

dvjbaja
 

Wow, that looks great, although a little low for a refractor.  

J



Sent via the Samsung Galaxy Note9, an AT&T 5G Evolution capable smartphone


-------- Original message --------
From: stlrvus <jmagsaysay58@...>
Date: 5/15/20 7:21 AM (GMT-08:00)
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] AP Eagle for 8-10"

I had an adapter made for mine.  Works perfectly.  Never had a problem. 


Re: AP Eagle for 8-10"

stlrvus
 

I had an adapter made for mine.  Works perfectly.  Never had a problem. 


Re: AP Eagle for 8-10"

Dominique Durand
 

Hi Bill,
Here is a way to do that I had found when I was looking at whether an AP1100 might be right for me.

https://www.youtube.com/watch?v=GoOwouTf3jc

Dominique


Re: AP Eagle for 8-10"

Bill Long
 

Not the same as the Eagle man. The Eagle is sexy man. Seriously.




From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Frost David <frosty5@...>
Sent: Friday, May 15, 2020 6:54 AM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] AP Eagle for 8-10"
 
Just get an ATS pier.  They make 8” and 10” ones and their great!  I’ve got a 10” for my 1100 and it is stable as a rock, although heavy.

David



On May 15, 2020, at 9:22 AM, Bill Long <bill@...> wrote:


I have the 6" Eagle on my Mach 1, and I just long for a 8-10" version that would work nicely with the 1100 mount. 

Roland -- please, please, please make one! 🙂


Re: AP Eagle for 8-10"

Frost David
 

Just get an ATS pier.  They make 8” and 10” ones and their great!  I’ve got a 10” for my 1100 and it is stable as a rock, although heavy.

David



On May 15, 2020, at 9:22 AM, Bill Long <bill@...> wrote:


I have the 6" Eagle on my Mach 1, and I just long for a 8-10" version that would work nicely with the 1100 mount. 

Roland -- please, please, please make one! 🙂


AP Eagle for 8-10"

Bill Long
 

I have the 6" Eagle on my Mach 1, and I just long for a 8-10" version that would work nicely with the 1100 mount. 

Roland -- please, please, please make one! 🙂


Computer crahsed, mount crashed into itself

Dan
 

Help! I am scanning manuals but I can't find what I am looking for. Computer crashed, fount the mount had crashed into itself. The light was red (can't remember what color it is supposed to be)
The mount is acting funny slew speeds when moving it and parking it change. Going from the 1200 I Have it set to my guess is around 500.

How bad did I destroy this mount? How else can I test this?

- Dan


Re: Error message in APCC with sync command in TheSkyX Pro #APCC

Juergen Riedmeier
 

Hi Ray
many thanks for the quick answer.


My current versions are as described above:
Mount: AP 1200GTO with GTOCP3 Control Box (V1 Chip)
APCC Standard v1.8.0.4 / Ascom AP V2 Driver v5.30.10
The SkyX Pro version 10.5.0 (build 12503)
Selected mount setup in “TheSkyX Pro”: AstroPhysics GTO Ascom V2 Mount
Ascom Platform 6.4 Build 6.4.1.2695

TheSkyX Pro connects to the AP V2 driver (clients: 2/0)
see attached pictures.
Regards
Jürgen


Re: Error message in APCC with sync command in TheSkyX Pro #APCC

Ray Gralak
 

Hi Juergen,

Can you tell me the exact versions of SkyX Pro, APCC Pro, and AP V2 ASCOM driver?

Are you connecting SkyXPro through the AP V2 driver, or directly connecting it to one of APCC's virtual COM ports?

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Juergen Riedmeier
Sent: Wednesday, May 13, 2020 2:01 PM
To: main@ap-gto.groups.io
Subject: [ap-gto] Error message in APCC with sync command in TheSkyX Pro #APCC

Hello,

I have the following problem and need your help:



If I use the "Star Syncronization" or "Sync" command in TheSkyX Pro,
I get an error message from APCC:

Sync Target: Valid Alt / AZ, RA / DEC, RA / Dec has not been received!
(see screenshot below).



I usually do the following:

After starting Windows 10, I open APCC.

After the AP V2 Driver has been loaded, I open TheSkyX Pro and connect my mount

The AstroPhysics GTO Ascom V2 Mount driver is set.

I am setting a star in TheSkyX Pro and would like to synchronize my mount.

For this I use the "Star Syncronization" or "Sync" command.

Then I get the error message already described.

Without APCC it works.



Can someone please help me with this problem so that the sync command in TheSkyX Pro works with APCC?

Thank you very much and best regards from Germany

Jürgen





My configuration:

Mount: AP 1200GTO with GTOCP3 Control Box (V1 Chip)

Mount control software: APCC Standard v1.8.0.4

Driver: Ascom AP V2 Driver v5.30.10

The SkyX Pro version 10.5.0 (build 12503)

Selected driver in mount setup in “TheSkyX Pro”:

AstroPhysics GTO Ascom V2 Mount




Error message in APCC with sync command in TheSkyX Pro #APCC

Juergen Riedmeier
 

Hello,

I have the following problem and need your help:

If I use the "Star Syncronization" or "Sync" command in TheSkyX Pro,
I get an error message from APCC:

Sync Target: Valid Alt / AZ, RA / DEC, RA / Dec has not been received!
(see screenshot below).

I usually do the following:

After starting Windows 10, I open APCC.

After the AP V2 Driver has been loaded, I open TheSkyX Pro and connect my mount

The AstroPhysics GTO Ascom V2 Mount driver is set.

I am setting a star in TheSkyX Pro and would like to synchronize my mount.

For this I use the "Star Syncronization" or "Sync" command.

Then I get the error message already described.

Without APCC it works.

 

Can someone please help me with this problem so that the sync command in TheSkyX Pro works with APCC?

Thank you very much and best regards from Germany

Jürgen

 

 

My configuration:

Mount: AP 1200GTO with GTOCP3 Control Box (V1 Chip)

Mount control software: APCC Standard v1.8.0.4

Driver: Ascom AP V2 Driver v5.30.10

The SkyX Pro version 10.5.0 (build 12503)

Selected driver in mount setup in “TheSkyX Pro”:

AstroPhysics GTO Ascom V2 Mount


Odd guiding issues 1600

Mike Shade
 

Having odd guiding issues. PW 17CDK/AP1600GTO CP4/Optec Gemini/SBIG STL6303E. Win 7/Maxim 5.18/ACP V8, build 5/Focusmax 3.4.14/Sky6.63. The system will return round stars across the frame unguided for 382" (382" is the worm period) both sides of the meridian (PA=0), about 70 or so degree elevation (unbinned .63"/pixel). Telescope collimation is good. It will do the same, both sides of the meridian guided with both a 5" and 10" guide exposure (calibrating Maxim on each side). Maxim DEC compensation turned off (same in ACP), min move .02, max .15, correction delay .10, reverse X on meridian flip is on. Aggressiveness is 6.5, guider binned 3x3. Now here is the fun part. In ACP, will set PA=0 (rotater set to 0), run calibrate guider script pointed east (OTA on west side of pier). Guider calibrates nice "L" shape, movement is say 50. Will run a script, say NGC 5468, PA=145. It will run along nicely, flip the meridian and continue on the other side. All of the stars are elongated E/W, the images are useless (600" exposure). In looking at the guider log from Maxim, it seems that the system is making a lot of corrections in RA. Not big corrections (.02, .-03) but every few guider cycles. Do not see this in DEC, of course. I have checked everything I can think of. Plus the system will do unguided for 382" (suggesting that the PEC curve is good and the system is stable), and will guide through a worm cycle just fine on both sides of the meridian, calibrating prior to each. It seems that there is something with the rotator, Maxim, or ACP guiding. And there have been no updates or anything to software. This problem has been an issue for several weeks and I can't figure out what is going on here but dark time is being wasted. Anyone have any ideas or thoughts?

Mike J. Shade
Mike J. Shade Photography:
mshadephotography.com

In War: Resolution
In Defeat: Defiance
In Victory: Magnanimity
In Peace: Goodwill
Sir Winston Churchill
Already, in the gathering dusk, a few of the stars are turning on their lights.
Vega, the brightest one, is now dropping towards the west. Can it be half
a year since I watched her April rising in the east? Low in the southwest
Antares blinks a sad farwell to fall...
Leslie Peltier, Starlight Nights

International Dark Sky Association: www.darksky.org

8661 - 8680 of 79018