Date   

Re: Keypad Error #Keypad

Dean Jacobsen
 
Edited

... what George said.  :-)

Tom, I got my can of Deoxit from Amazon.
--
Dean Jacobsen
http://astrophoto.net/wp/ 
Image Gallery - http://astrophoto.net/wp/image-gallery/
Astrobin - https://www.astrobin.com/users/deanjacobsen/ 


Re: Keypad Error #Keypad

George
 

De-Oxit can be purchased through Amazon or you can find it in local electronic supply stores.   I have been told that music stores that sell musical instruments stock it for bands.

 

Regards,

 

George

 

George Whitney

Astro-Physics, Inc.

Phone:  815-282-1513

Email:  george@...

 

From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of DFisch
Sent: Tuesday, June 02, 2020 12:51 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] Keypad Error #Keypad

 

Dean, tell me about DEoxit and where best to get it. I use an automotive terminal cleaner, not for battery cables that I’ve used in my dads auto shop years ago, may not be best for finer electronic boards. Tom

 

On Tue, Jun 2, 2020 at 12:36 Dean Jacobsen <deanjacobsen@...> wrote:

On Tue, Jun 2, 2020 at 06:00 AM, George wrote:

You may be experiencing some oxidation issues also. 

Yes, that was the problem.  Cleaned the blue board connector and pins with Deoxit and it boots right up.  Now to change the battery while I have the keypad open.
 
--
Dean Jacobsen
http://astrophoto.net/wp/ 
Image Gallery - http://astrophoto.net/wp/image-gallery/
Astrobin - https://www.astrobin.com/users/deanjacobsen/ 

--

TJF MOBILE


Re: Keypad Error #Keypad

DFisch
 

Dean, tell me about DEoxit and where best to get it. I use an automotive terminal cleaner, not for battery cables that I’ve used in my dads auto shop years ago, may not be best for finer electronic boards. Tom

On Tue, Jun 2, 2020 at 12:36 Dean Jacobsen <deanjacobsen@...> wrote:
On Tue, Jun 2, 2020 at 06:00 AM, George wrote:
You may be experiencing some oxidation issues also. 
Yes, that was the problem.  Cleaned the blue board connector and pins with Deoxit and it boots right up.  Now to change the battery while I have the keypad open.
 
--
Dean Jacobsen
http://astrophoto.net/wp/ 
Image Gallery - http://astrophoto.net/wp/image-gallery/
Astrobin - https://www.astrobin.com/users/deanjacobsen/ 

--
TJF MOBILE


Re: Keypad Error #Keypad

Roland Christen
 


I assume it is corrupted.
Yup!

Rolando


-----Original Message-----
From: Dean Jacobsen <deanjacobsen@...>
To: main@ap-gto.groups.io
Sent: Tue, Jun 2, 2020 12:21 pm
Subject: Re: [ap-gto] Keypad Error #Keypad

On Tue, Jun 2, 2020 at 09:39 AM, uncarollo2 <chris1011@...> wrote:
Keep the keypad powered as you change the battery.
Too late.  :-)  Not a big deal for me to re-load the database.  I assume it is corrupted.
 
--
Dean Jacobsen
http://astrophoto.net/wp/ 
Image Gallery - http://astrophoto.net/wp/image-gallery/
Astrobin - https://www.astrobin.com/users/deanjacobsen/ 


Re: Keypad Error #Keypad

Dean Jacobsen
 

On Tue, Jun 2, 2020 at 09:39 AM, uncarollo2 <chris1011@...> wrote:
Keep the keypad powered as you change the battery.
Too late.  :-)  Not a big deal for me to re-load the database.  I assume it is corrupted.
 
--
Dean Jacobsen
http://astrophoto.net/wp/ 
Image Gallery - http://astrophoto.net/wp/image-gallery/
Astrobin - https://www.astrobin.com/users/deanjacobsen/ 


Re: Keypad Error #Keypad

Roland Christen
 

Keep the keypad powered as you change the battery.

Roland



-----Original Message-----
From: Dean Jacobsen <deanjacobsen@...>
To: main@ap-gto.groups.io
Sent: Tue, Jun 2, 2020 11:36 am
Subject: Re: [ap-gto] Keypad Error #Keypad

On Tue, Jun 2, 2020 at 06:00 AM, George wrote:
You may be experiencing some oxidation issues also. 
Yes, that was the problem.  Cleaned the blue board connector and pins with Deoxit and it boots right up.  Now to change the battery while I have the keypad open.
 
--
Dean Jacobsen
http://astrophoto.net/wp/ 
Image Gallery - http://astrophoto.net/wp/image-gallery/
Astrobin - https://www.astrobin.com/users/deanjacobsen/ 


Re: Keypad Error #Keypad

Dean Jacobsen
 

On Tue, Jun 2, 2020 at 06:00 AM, George wrote:
You may be experiencing some oxidation issues also. 
Yes, that was the problem.  Cleaned the blue board connector and pins with Deoxit and it boots right up.  Now to change the battery while I have the keypad open.
 
--
Dean Jacobsen
http://astrophoto.net/wp/ 
Image Gallery - http://astrophoto.net/wp/image-gallery/
Astrobin - https://www.astrobin.com/users/deanjacobsen/ 


Re: Keypad Error #Keypad

George
 

Michael,

 

Chris Erickson has spoken of it with great praise.   I have no experience with it and cannot speak to it.

 

Regards,

 

George

 

George Whitney

Astro-Physics, Inc.

Phone:  815-282-1513

Email:  george@...

 

From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Michael Hambrick via groups.io
Sent: Tuesday, June 02, 2020 9:48 AM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] Keypad Error #Keypad

 

Hi George

Would you recommend using a dielectric grease on these connections to minimize / prevent corrosion ?

I have never seen any corrosion on my keypad or mount cables, but I have seen some corrosion on the USB cables that plug into my cameras.


Best Regards

Michael Hambrick
ARLANXEO

TSR Global Manufacturing Support
PO Box 2000
Orange, TX 77631-2000
Phone: +1 (409) 882-2799
email: mike.hambrick@...


Re: Keypad Error #Keypad

Michael Hambrick <mike.hambrick@...>
 

Hi George

Would you recommend using a dielectric grease on these connections to minimize / prevent corrosion ?

I have never seen any corrosion on my keypad or mount cables, but I have seen some corrosion on the USB cables that plug into my cameras.


Best Regards

Michael Hambrick
ARLANXEO
TSR Global Manufacturing Support
PO Box 2000
Orange, TX 77631-2000
Phone: +1 (409) 882-2799
email: mike.hambrick@...


Re: Keypad Error #Keypad

Dean Jacobsen
 


Re: Keypad Error #Keypad

George
 

Dean,

 

You may be experiencing some oxidation issues also.   Please see our Keypad Maintenance Instructions on the Tech Support page for safe opening and checking.   Plug the connectors in and out a few times and insure that they seat fully.  

https://astro-physics.info/tech_support/mounts/keypad/keypad-maintenance-instructions.pdf

 

Regards,

 

George

 

George Whitney

Astro-Physics, Inc.

Phone:  815-282-1513

Email:  george@...

 

From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Dean Jacobsen
Sent: Monday, June 01, 2020 8:41 PM
To: main@ap-gto.groups.io
Subject: [ap-gto] Keypad Error #Keypad

 

I have a backup keypad that I need to replace the old battery and upgrade to the most recent software version.  It hasn't been used for a couple of years.  When plugged it into the CP3 controller for the 900 I got a flashing version number followed by a question mark and then the keypad hangs.

Is this to be expected with a completely dead battery, or is this an indicator of a more serious problem with the keypad?
--
Dean Jacobsen
http://astrophoto.net/wp/ 
Image Gallery - http://astrophoto.net/wp/image-gallery/
Astrobin - https://www.astrobin.com/users/deanjacobsen/ 


Keypad Error #Keypad

Dean Jacobsen
 

I have a backup keypad that I need to replace the old battery and upgrade to the most recent software version.  It hasn't been used for a couple of years.  When plugged it into the CP3 controller for the 900 I got a flashing version number followed by a question mark and then the keypad hangs.

Is this to be expected with a completely dead battery, or is this an indicator of a more serious problem with the keypad?
--
Dean Jacobsen
http://astrophoto.net/wp/ 
Image Gallery - http://astrophoto.net/wp/image-gallery/
Astrobin - https://www.astrobin.com/users/deanjacobsen/ 


Re: AP now open - question about mount manufacturing order/priority

 

Shailesh,

 

Unfortunately, we don’t have any 1100s available for new orders. We started production just before our shutdown, so are just getting back into that groove. I would anticipate that we would have some available in the Fall. We are not accepting orders for the new run yet.

 

We will likely begin our Mach2 notification for the next run this month.  The parts for these mounts are nearly complete. We’ll should be able to start assembly on these as soon as we finish the first run.

 

Clear Skies,

 

Marj Christen

Astro-Physics, Inc

11250 Forest Hills Rd

Machesney Park, IL 61115

Phone: 815-282-1513

Fax: 815-282-9847

www.astro-physics.com

 

From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Shailesh Trivedi
Sent: Monday, June 01, 2020 4:01 PM
To: main@ap-gto.groups.io
Subject: [ap-gto] AP now open - question about mount manufacturing order/priority

 

I just saw that Marj posted a blog on Friday that communicated to us that AP is up & running with full staff today. This is great news.

This implies that mount production is restarting, please correct if wrong.

I am on the list for a Mach2 from April 2019, but would like to know when an AP1100 with AE may be available.

Any eta about order of assembly & 1100 vs Mach 2?

Shailesh


Re: Case for AP900

sroberts84
 

Thanks a lot!

-- 
I've seen things you people wouldn't believe.
Attack ships on fire off the shoulder of Orion. I watched C-beams glitter in the dark near the Tannhauser gate.
All those moments will be lost in time, like tears in rain. Time to die.

Roy Batty (Jan 8th 2016 - Dec 2019)

On Mon, 2020-06-01 at 12:16 -0700, leszek@... wrote:
https://nalpak.com/skb-iseries-3i-2424-14-case/


AP now open - question about mount manufacturing order/priority

Shailesh Trivedi
 

I just saw that Marj posted a blog on Friday that communicated to us that AP is up & running with full staff today. This is great news.

This implies that mount production is restarting, please correct if wrong.

I am on the list for a Mach2 from April 2019, but would like to know when an AP1100 with AE may be available.

Any eta about order of assembly & 1100 vs Mach 2?

Shailesh


Re: Case for AP900

Leszek
 


Re: Case for AP900

sroberts84
 

Hello,
Looks great, but where have you seen the case with foam for under $300.00?

Thanks.,

S Roberts
-- 
I've seen things you people wouldn't believe.
Attack ships on fire off the shoulder of Orion. I watched C-beams glitter in the dark near the Tannhauser gate.
All those moments will be lost in time, like tears in rain. Time to die.

Roy Batty (Jan 8th 2016 - Dec 2019)

On Mon, 2020-06-01 at 09:28 -0700, leszek@... wrote:
I was looking recently for a case for my ap900gto mount.  It turns out that the SKB iSeries 3I-2424-14 Case is a perfect fit, works well and you can get it online for less than $300 with cubed foam.


Case for AP900

Leszek
 

I was looking recently for a case for my ap900gto mount.  It turns out that the SKB iSeries 3I-2424-14 Case is a perfect fit, works well and you can get it online for less than $300 with cubed foam.


Re: AP 1100 mount and phd2

Leon
 

Thanks, all this help in my learning curve is great!! thanks again!






On Monday, June 1, 2020, 10:12:10 AM CDT, Brian Valente <bvalente@...> wrote:


Leon I am a regular over at PHD, 

i put together a baseline guiding tutorial that should get you most of the way to a working setup, it's often used as a first step to getting your guiding dialed in:



If you have additional questions you can drop those logs over at the phd forums and it's a good starting point for analysis


Brian

On Mon, Jun 1, 2020 at 7:36 AM Leon via groups.io <lftscope=yahoo.com@groups.io> wrote:
Wow, extremely helpful, thank you!!


On Jun 1, 2020, at 9:12 AM, Dean Jacobsen <deanjacobsen@...> wrote:

Leon,

I found this document very helpful when I was learning PHD2 - https://openphdguiding.org/phd2-best-practices/

The guiding assistant is quite good.  I let it do its thing once I get set up and it gets dark.
--
Dean Jacobsen
http://astrophoto.net/wp/ 
Image Gallery - http://astrophoto.net/wp/image-gallery/
Astrobin - https://www.astrobin.com/users/deanjacobsen/ 



--
Brian 



Brian Valente


Re: AP 1100 mount and phd2

 

Leon I am a regular over at PHD, 

i put together a baseline guiding tutorial that should get you most of the way to a working setup, it's often used as a first step to getting your guiding dialed in:



If you have additional questions you can drop those logs over at the phd forums and it's a good starting point for analysis


Brian

On Mon, Jun 1, 2020 at 7:36 AM Leon via groups.io <lftscope=yahoo.com@groups.io> wrote:
Wow, extremely helpful, thank you!!


On Jun 1, 2020, at 9:12 AM, Dean Jacobsen <deanjacobsen@...> wrote:

Leon,

I found this document very helpful when I was learning PHD2 - https://openphdguiding.org/phd2-best-practices/

The guiding assistant is quite good.  I let it do its thing once I get set up and it gets dark.
--
Dean Jacobsen
http://astrophoto.net/wp/ 
Image Gallery - http://astrophoto.net/wp/image-gallery/
Astrobin - https://www.astrobin.com/users/deanjacobsen/ 



--
Brian 



Brian Valente

8301 - 8320 of 79084