Date   

Re: Equipment for an observatory

Shane Ramotowski
 

Hi Eric,

Private message back to you.

Just wanted to let you know that you need to keep track of NM's COVID restrictions.  Currently all travelers entering the state are required to quarantine for 14 days.  We're doing really good at reducing the infection rates and I expect that restriction to lift within the next month, but you should be aware of it and check the governor's public health orders before you come.

- Shane

On 8/19/2020 6:16 PM, Eric Claeys wrote:
My new observatory in NM is almost ready and I hope to drive there in October with my equipment to set it up.  I have a mount (1100GTO-AEL) and telescope, plus a PC/monitor to control it remotely, and will have Internet access as well as a couple cameras to look at the inside of the observatory.  It has a rain sensor and THUM, and is next to NM Skies so I can use their all-sky camera.  It's a roll-off roof and at 7000 ft so doesn't need air conditioning or a fan.  I will have some plastic bins for empty boxes and other stuff (to keep it dry in case of dew or rain).  I have a power surge protector, UPS, and remote power switch.  I will likely only visit once or twice a year.  I will most likely keep the equipment on all the time.
I will connect to the mount via RS232 (the new PC actually has an RS232 port!) and Ethernet when possible, otherwise USB.

What are some things I should consider buying for the observatory?  Chair, broom, step stool, basic tools, other astronomy gear, etc.?
--
Shane Ramotowski
kor@cotse.net
https://www.kor-astro.net


Re: Equipment for an observatory

Chris Carlton
 

As noted, rodents are a potential problem. But please don't use glue traps. They are horribly indiscriminate and will kill creatures that will happily eat mice, or a least won't bother your equipment. In addition to mice that might chew a wire every now and then, in that part of the country, pack rats (Neotoma sp.) are a very serious threat if they set up shop. They did $500 worth of damage to my newish car (not covered by warranty) last year in one night during a trip to Arizona. The mechanic said I was lucky. If a service is available, contract with a pest control operator about excluding rodents and periodical service checks....just no glue traps, which probably won't work on pack rats anyway. 


On Wed, Aug 19, 2020 at 8:02 PM uncarollo2 <chris1011@...> via groups.io <chris1011=aol.com@groups.io> wrote:

What are some things I should consider buying for the observatory?
Mouse traps. Lots of mouse traps. ;^)

Rolando


-----Original Message-----
From: Eric Claeys <AstroEric@...>
To: main@ap-gto.groups.io
Sent: Wed, Aug 19, 2020 7:16 pm
Subject: [ap-gto] Equipment for an observatory

My new observatory in NM is almost ready and I hope to drive there in October with my equipment to set it up.  I have a mount (1100GTO-AEL) and telescope, plus a PC/monitor to control it remotely, and will have Internet access as well as a couple cameras to look at the inside of the observatory.  It has a rain sensor and THUM, and is next to NM Skies so I can use their all-sky camera.  It's a roll-off roof and at 7000 ft so doesn't need air conditioning or a fan.  I will have some plastic bins for empty boxes and other stuff (to keep it dry in case of dew or rain).  I have a power surge protector, UPS, and remote power switch.  I will likely only visit once or twice a year.  I will most likely keep the equipment on all the time.
I will connect to the mount via RS232 (the new PC actually has an RS232 port!) and Ethernet when possible, otherwise USB.

What are some things I should consider buying for the observatory?  Chair, broom, step stool, basic tools, other astronomy gear, etc.?



--

Chris Carlton, Ph. D.

Director, Carlton Astronomy Campus

Professor of Entomology, Emeritus

Department of Entomology, Louisiana State University

Baton Rouge, LA USA 70808

<a href=http://www.cleardarksky.com/c/CrAstCmpMSkey.html>


Re: Mach-2 can not reach target

Bill Long
 

Resolved this problem. The Gerd Neumann ships with a 10mm adapter, and the inside of that adapter was too reflective/shiny. I flocked it with some flocking paper and the problem is resolved. 


From: Bill Long <bill@...>
Sent: Monday, August 17, 2020 10:14 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] Mach-2 can not reach target
 
No frost, no condensation at all. I even have the dew prevention on. I think Roland is spot on with the window theory. 

The place image at, is on a wooden deck, suspended two stories in the air. Really not the best place to image, but the only option I have now. Dew is rare that high off of the ground, and with the current weather situation here -- dew isnt a thing even if I were at ground level.  


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Christopher Erickson <christopher.k.erickson@...>
Sent: Monday, August 17, 2020 10:11 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] Mach-2 can not reach target
 
Whenever I have seen a foggy disc or donut like that it has usually been condensation or frost on the inside or the outside of the camera protective front glass above the chip. On the outside on nights of extreme Hawaiian humidity or on the inside when my desiccant plug needs recharging. The trials and tribulations of living in Hawaii...


-Christopher Erickson
Observatory engineer
Waikoloa, HI 96738
www.summitkinetics.com
   

On Mon, Aug 17, 2020, 6:13 PM Bill Long <bill@...> wrote:
Model running tonight, and what do you know... that halo IS there on this system as well. Since its not Astro Dark, I bet it goes away later as I did not see it previously but it was well into Astro Dark then. 

I took some flats and just looked and the OIII flats show the halo as well. So, has nothing to do with my GTX+Flattener (not that I thought it did). 




From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Bill Long <bill@...>
Sent: Monday, August 17, 2020 4:56 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] Mach-2 can not reach target
 
Yeah I took it all apart when I put the DK out. Next time I have the GTX up I will investigate further. It will probably disappear, whatever it was. 


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of uncarollo2 <chris1011@...> via groups.io <chris1011=aol.com@groups.io>
Sent: Monday, August 17, 2020 4:55 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] Mach-2 can not reach target
 
Should also show up in your flat field image.

Roland

-----Original Message-----
From: Bill Long <bill@...>
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Sent: Mon, Aug 17, 2020 6:32 pm
Subject: Re: [ap-gto] Mach-2 can not reach target

Very little changes needed with the field flattener. I did have this strange halo appear in my frames that I can only reproduce with the flattener. The Quad TCC doesnt show it, and my DK doesnt show anything either with the exact same spacers, adapters, and focuser (NiteCrawler). 




From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of uncarollo2 <chris1011@...> via groups.io <chris1011=aol.com@groups.io>
Sent: Monday, August 17, 2020 4:29 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] Mach-2 can not reach target
 
I'm thinking Field Flattener which gives more leeway for any tilt, and has higher resolution. Although resolution is probably not an issue with those tiny pixels.

Rolando



-----Original Message-----
From: Dale Ghent <daleg@...>
To: main@ap-gto.groups.io
Sent: Mon, Aug 17, 2020 6:23 pm
Subject: Re: [ap-gto] Mach-2 can not reach target


I'm working out the QHY600 + 7x50mm filter wheel on my 130GTX+QTCC right now. Long story short, the focal ratio made traditional tilt correction impossible to do and so I'm awaiting delivery of a CTU from Gerd Neumann, which should have arrived today but FedEx seem to have decided to start competing with UPS in my area for least reliable delivery.

Once I get that on with proper backspacing (I might be able to use an existing part I have, else it's another ~25 day wait for something from Precise Parts) I will hopefully be in business.

Bill's right, the IMX455 sensor that is in the QHY600/ZWO ASI6200 is an astounding performer and blows every prior generation of CMOS clean out of the water. Once the tilt and backfocus demon is tamed, that is.

> On Aug 17, 2020, at 6:20 PM, uncarollo2 <chris1011@...> via groups.io <chris1011=aol.com@groups.io> wrote:
>
>
> I have ASI6200 with a 7 position filter wheel attached behind the flattener.
> I would love to see how that works. I've been thinking about a QHY 600 camera.
>
> Rolando
>
>
> -----Original Message-----
> From: Konstantin von Poschinger <KPoschinger@...>
> To: main@ap-gto.groups.io
> Sent: Mon, Aug 17, 2020 4:46 pm
> Subject: Re: [ap-gto] Mach-2 can not reach target
>
> Sorry, I have done now the right on! I will report when all is fine now!
> By the way I am imaging with a Stowaway on the Mach2. It is a nice combination and I am happy with the performance. I have ASI6200 with a 7 position filter wheel attached behind the flattener.
>
> Konstantin
>
> <IMG_2228.jpeg>
>> Am 17.08.2020 um 22:15 schrieb uncarollo2 <chris1011@...> via groups.io <chris1011=aol.com@groups.io>:
>>
>>
>> As Roland said I can prevent this with the $SLD0# command.
>> Well, Roland said it wrong and Howard said it right. Use :LR0# to turn off the RA limits at the Meridian.
>>
>> Rolando
>>
>>
>> -----Original Message-----
>> From: Konstantin von Poschinger <KPoschinger@...>
>> To: main@ap-gto.groups.io
>> Sent: Mon, Aug 17, 2020 3:10 pm
>> Subject: Re: [ap-gto] Mach-2 can not reach target
>>
>> Hello Howard,
>>
>> I have set the limits on both sides! The problem is to move from a cw up position on the east direct to a cw up position in the west. As Roland said I can prevent this with the $SLD0# command. I will test that.
>>
>> Grüsse
>>
>> Konstantin v. Poschinger
>>
>>
>> Hammerichstr. 5
>> 22605 Hamburg
>> 040/8805747
>> 0171/1983476
>>
>>> Am 17.08.2020 um 21:42 schrieb Howard Hedlund <howard@...>:
>>>
>>> Setting an appropriate meridian delay BEFORE the counterweight shaft goes up will also avoid the problem.  This is easily set in APCC.
>
>
> <IMG_2228.jpeg>




Re: Equipment for an observatory

dvjbaja
 

Will you have someone nearby to assist with troubleshooting and repairs?  No such thing as autonomous. If it can fail, it will.  Speaking from experience.  

jg 

On Wed, Aug 19, 2020 at 6:02 PM uncarollo2 <chris1011@...> via groups.io <chris1011=aol.com@groups.io> wrote:

What are some things I should consider buying for the observatory?
Mouse traps. Lots of mouse traps. ;^)

Rolando


-----Original Message-----
From: Eric Claeys <AstroEric@...>
To: main@ap-gto.groups.io
Sent: Wed, Aug 19, 2020 7:16 pm
Subject: [ap-gto] Equipment for an observatory

My new observatory in NM is almost ready and I hope to drive there in October with my equipment to set it up.  I have a mount (1100GTO-AEL) and telescope, plus a PC/monitor to control it remotely, and will have Internet access as well as a couple cameras to look at the inside of the observatory.  It has a rain sensor and THUM, and is next to NM Skies so I can use their all-sky camera.  It's a roll-off roof and at 7000 ft so doesn't need air conditioning or a fan.  I will have some plastic bins for empty boxes and other stuff (to keep it dry in case of dew or rain).  I have a power surge protector, UPS, and remote power switch.  I will likely only visit once or twice a year.  I will most likely keep the equipment on all the time.
I will connect to the mount via RS232 (the new PC actually has an RS232 port!) and Ethernet when possible, otherwise USB.

What are some things I should consider buying for the observatory?  Chair, broom, step stool, basic tools, other astronomy gear, etc.?


Re: Equipment for an observatory

Roland Christen
 


What are some things I should consider buying for the observatory?
Mouse traps. Lots of mouse traps. ;^)

Rolando


-----Original Message-----
From: Eric Claeys <AstroEric@...>
To: main@ap-gto.groups.io
Sent: Wed, Aug 19, 2020 7:16 pm
Subject: [ap-gto] Equipment for an observatory

My new observatory in NM is almost ready and I hope to drive there in October with my equipment to set it up.  I have a mount (1100GTO-AEL) and telescope, plus a PC/monitor to control it remotely, and will have Internet access as well as a couple cameras to look at the inside of the observatory.  It has a rain sensor and THUM, and is next to NM Skies so I can use their all-sky camera.  It's a roll-off roof and at 7000 ft so doesn't need air conditioning or a fan.  I will have some plastic bins for empty boxes and other stuff (to keep it dry in case of dew or rain).  I have a power surge protector, UPS, and remote power switch.  I will likely only visit once or twice a year.  I will most likely keep the equipment on all the time.
I will connect to the mount via RS232 (the new PC actually has an RS232 port!) and Ethernet when possible, otherwise USB.

What are some things I should consider buying for the observatory?  Chair, broom, step stool, basic tools, other astronomy gear, etc.?


Re: Equipment for an observatory

Benoit Schillings
 

Rat killing equipment and stainless braided hoses for the cables.

-- benoit

On Wed, Aug 19, 2020 at 5:16 PM Eric Claeys <AstroEric@eccssw.com> wrote:

My new observatory in NM is almost ready and I hope to drive there in October with my equipment to set it up. I have a mount (1100GTO-AEL) and telescope, plus a PC/monitor to control it remotely, and will have Internet access as well as a couple cameras to look at the inside of the observatory. It has a rain sensor and THUM, and is next to NM Skies so I can use their all-sky camera. It's a roll-off roof and at 7000 ft so doesn't need air conditioning or a fan. I will have some plastic bins for empty boxes and other stuff (to keep it dry in case of dew or rain). I have a power surge protector, UPS, and remote power switch. I will likely only visit once or twice a year. I will most likely keep the equipment on all the time.
I will connect to the mount via RS232 (the new PC actually has an RS232 port!) and Ethernet when possible, otherwise USB.

What are some things I should consider buying for the observatory? Chair, broom, step stool, basic tools, other astronomy gear, etc.?


Equipment for an observatory

Eric Claeys
 

My new observatory in NM is almost ready and I hope to drive there in October with my equipment to set it up.  I have a mount (1100GTO-AEL) and telescope, plus a PC/monitor to control it remotely, and will have Internet access as well as a couple cameras to look at the inside of the observatory.  It has a rain sensor and THUM, and is next to NM Skies so I can use their all-sky camera.  It's a roll-off roof and at 7000 ft so doesn't need air conditioning or a fan.  I will have some plastic bins for empty boxes and other stuff (to keep it dry in case of dew or rain).  I have a power surge protector, UPS, and remote power switch.  I will likely only visit once or twice a year.  I will most likely keep the equipment on all the time.
I will connect to the mount via RS232 (the new PC actually has an RS232 port!) and Ethernet when possible, otherwise USB.

What are some things I should consider buying for the observatory?  Chair, broom, step stool, basic tools, other astronomy gear, etc.?


Re: APCC and MBoxV2 #APCC

Phillip Klein
 

Bryan,
Thank you for that additional bit of information.
Appreciate it.
Phillip


On Aug 19, 2020, at 1:35 PM, Worsel via groups.io <bryancashion@...> wrote:

Phillip

In tinkering with the MboxV2 some more, it appears I do not have to connect to the box.  It seems that APPC Pro looks for the box on initialization and displays the info in the Pointing Model Tab. In addition, you can put the cursor over the Temperature or Pressure and you get more info.  Only took me 8 months to learn that!!

Connection in the GPS Tab is only needed to get GPS location.


Bryan


Re: Where is APPC and APPC Pro???

Tom Blahovici
 

Never mind.  You need to open in new tab....


Where is APPC and APPC Pro???

Tom Blahovici
 

HI,
Just got my CP4, but when I click on the links on the AP website, nothing happens.  No downloads. Am I missing something?
Also I never got my email with the trial info?
Tom


maintaining the scope pointing upward while slewing #APCC

lacour.morten
 

I wonder if there is a way to make APCC slew while keeping the telescope pointing upward. 
If, during slew, the scope points downward there is more stress on the mirror, and it may tend to move more than if the weight is kept on its posterior support.

Morten


Re: APCC and MBoxV2 #APCC

Worsel
 

Phillip

In tinkering with the MboxV2 some more, it appears I do not have to connect to the box.  It seems that APPC Pro looks for the box on initialization and displays the info in the Pointing Model Tab. In addition, you can put the cursor over the Temperature or Pressure and you get more info.  Only took me 8 months to learn that!!

Connection in the GPS Tab is only needed to get GPS location.


Bryan


Re: A couple of doubts about modeling and about not using guiding. #APCC #Mach2GTO

Marcelo Figueroa
 

Thank you, Ray. 
 
Will the smaller Mbox version work (cheaper) or does it necessarily have to be the V2?

https://www.astromi.ch/product/mbox/
 
Thanks again,


Re: APCC and MBoxV2 #APCC

Phillip Klein
 

Hi Bryan,

Thank you for letting me know APCC does work with MBoxV2. I just downloaded what may be a newer version. My equipment is at another location so I will try connecting in the GPS tab. I'm not sure that is how I tried connecting in the past.
If I still have a problem connecting I may circle back with you again.
Thank you very much for your reply.

Phillip

On Wed, Aug 19, 2020 at 11:04 AM Worsel via groups.io <bryancashion=yahoo.com@groups.io> wrote:
Phillip

Yes, I have had the MboxV2 for about 8 months.  The biggest challenge is remembering to Connect in the GPS tab.  I downloaded and installed the Astromi.ch Windows app which found the box, including the COM Port, which APPC needs.

Bryan


Re: Exposure comparisons with CCD cameras

Benoit Schillings
 

The best guess then is that your camera has significant readout noise
or quantization noise.

-- benoit

On Wed, Aug 19, 2020 at 9:43 AM uncarollo2 <chris1011@aol.com> via
groups.io <chris1011=aol.com@groups.io> wrote:


Roland, you should try averaging the six ten minute exposures. The S/N will be higher, and the result should look closer to the single 60-minute image.

Actually I did that. I tried combining 3 different ways median, average and sum. None of them came close to the sig/noise of the single exposure.

Roland


-----Original Message-----
From: Ray Gralak <groups3@gralak.com>
To: main@ap-gto.groups.io
Sent: Wed, Aug 19, 2020 9:17 am
Subject: Re: [ap-gto] Exposure comparisons with CCD cameras

Median combined can be an issue for very slight background variation.
How confident are you of the software auto-scaling... I would do a
simple mean for the comparaison, even if you end up with a few hot
pixels
Benoit is right.

Roland, you should try averaging the six ten minute exposures. The S/N will be higher, and the result should look closer to the single 60-minute image.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Benoit Schillings
Sent: Tuesday, August 18, 2020 7:10 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] Exposure comparisons with CCD cameras

Median combined can be an issue for very slight background variation.
How confident are you of the software auto-scaling... I would do a
simple mean for the comparaison, even if you end up with a few hot
pixels

-- benoit

On Tue, Aug 18, 2020 at 6:07 PM W Hilmo <y.groups@hilmo.net> wrote:

“I'm not shooting RGB, I'm shooting NB where the 10 min object signal is at 700 or so out of 65,000.”



I realize that you weren’t shooting RGB, and I know that you can’t do a single 60 minute broad band exposure
without saturating the sensor. I am saying that if you were shooting RGB (and if the sensor had sufficient well
depth to deal with that), I would expect the two results to be closer to each other. The reason for that is that
that the dominant noise would be shot noise from a much higher signal in the background sky. Since you are
shooting narrow band, both the signal and shot noise are very small. That makes the read noise relatively
more significant.



In terms of S/N, the difference between 1x3600 seconds and 6x600 seconds is the read noise of the camera.
You may also be giving up something by using median combine instead of a combination of statistical rejection
and mean combine – but the specifics of that are less clear to me.



From: main@ap-gto.groups.io <main@ap-gto.groups.io> On Behalf Of uncarollo2 <chris1011@aol.com> via
groups.io
Sent: Tuesday, August 18, 2020 2:53 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] Exposure comparisons with CCD cameras





If you were shooting RGB, or if you were using a camera with very low read noise, I’m guessing that the final
comparison between the two results would be much closer.

I'm not shooting RGB, I'm shooting NB where the 10 min object signal is at 700 or so out of 65,000. And the
faintest detail in the thin wisps next to the brightest part are on the order of 160 in that exposure time. In the 1
hour exposure they are 6 times higher, which is still low compared to the max level before saturation. I could go
10 hours before reaching saturation of the brightest part of the nebula.



I was not trying to compare RGB, only Narrowband for extremely faint objects. I cannot do RGB here due to
massive light pollution, so it's a moot point. I'm simply saying that for very faint stuff, long exposure NB has an
advantage. It's not only me, but others have shown similar results. The noise in the CCD is the same for both
exposures - that is, the noise produced by the camera is high for both images. The download noise may be the
limiting factor, so therefore it behooves to increase the exposure time and thus minimize the number of
downloads if you want to capture the faintest possible detail.



By the way, I have changed the image posted on AstroBin with some more info.

https://www.astrobin.com/916uf7/C/



Rolando





-----Original Message-----
From: W Hilmo <y.groups@hilmo.net>
To: main@ap-gto.groups.io
Sent: Tue, Aug 18, 2020 4:06 pm
Subject: Re: [ap-gto] Exposure comparisons with CCD cameras

I think that to understand what’s going on, you need to separate read noise from shot noise.



In the single 60 minute image, there is 60 minutes worth of signal, 60 minutes worth of shot noise and 1
instance of read noise. In the 6 x 10 image, there is 60 minutes worth of signal, 60 minutes worth of shot noise
and 6 instances of read noise. In theory, I believe that the math suggests that with a zero read noise camera,
there would be no difference in S/N between the two final images. If I remember correctly, you are using a
camera with a KAF-8300 CCD, which has pretty high read noise. Also, you are imaging a narrow band object,
so the signal level in the faint areas is very low.



If you were shooting RGB, or if you were using a camera with very low read noise, I’m guessing that the final
comparison between the two results would be much closer.



From: main@ap-gto.groups.io <main@ap-gto.groups.io> On Behalf Of uncarollo2 <chris1011@aol.com> via
groups.io
Sent: Tuesday, August 18, 2020 1:56 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] Exposure comparisons with CCD cameras



Aha, thank you for the explanation.



Rolando







-----Original Message-----
From: sbasprez via groups.io <beneckerus=aol.com@groups.io>
To: main@ap-gto.groups.io
Sent: Tue, Aug 18, 2020 3:52 pm
Subject: Re: [ap-gto] Exposure comparisons with CCD cameras

The lower background noise floor in the 60 minute image is easily explained mathematically. Noise in a sum
of stacked of images is increased by the square root of the number of subs stacked. So summing the stack of
10 subs results in 3.16 time the noise of a single sub. The signal on the other hand adds linearly. So the
signal in the summed stack is equal to the 60 minute exposure, but the noise floor in the stack is higher than
the 60 minute single frame.




Re: A couple of doubts about modeling and about not using guiding. #APCC #Mach2GTO

Dean Jacobsen
 

It is rare that I would have that much of a temperature change after running a model.  That would probably only happen in the winter.
--
Dean Jacobsen
http://astrophoto.net/wp/
Image Gallery - http://astrophoto.net/wp/image-gallery/
Astrobin - https://www.astrobin.com/users/deanjacobsen/ 


Re: APCC and MBoxV2 #APCC

Worsel
 

Phillip

Yes, I have had the MboxV2 for about 8 months.  The biggest challenge is remembering to Connect in the GPS tab.  I downloaded and installed the Astromi.ch Windows app which found the box, including the COM Port, which APPC needs.

Bryan


Re: A couple of doubts about modeling and about not using guiding. #APCC #Mach2GTO

Worsel
 

The APPC-Pro manual says changes to the model can become important if the temperature change is above 15 degrees C. (See screenshot of page 188). 

Bryan


APCC and MBoxV2 #APCC

Phillip Klein
 

Hello,

My question is anyone using APCC and MBoxV2 successfully, meaning the data from MBoxV2 is connected to APCC and the data from MBoxV2 is being received in APCC?

Thank you,

Phillip


APCC-Pro manual temperature/pressure entry question

Bob Benamati
 

Ray,

For some reason, the temperature entry box for the pointing model has disappeared. I thought maybe updating to the latest version would fix it, but unfortunately it hasn't. The pressure box IS still there, so not sure if this is truly abnormal (screenshot attached).

Not having a weather station, I originally created a model at 10C, and that info is what is still populating APPM whenever I've redone a model. Not sure where APPM is drawing that from and if I can/should change it when I do go to redo a model in the future.

Overall, APCC has been working wonders even for my old 900 CP3, so this is just more of a curiosity than an urgent need for resolution!

Thanks!
Bob

7201 - 7220 of 79787