I had the same issue with my 900 and was able to replace the "pucks" with the special tool from AP. I don't recommend doing that because it didn't make a difference. I did put a couple drops of

Hi Marj, I need to apologize... I'm able to see the right link with Internet Explorer and with my Google phone application but not with my Google browser (computer) even in reloading the page with F5

Dale/Mike/Brian That worked! Thanks much guys.

Wayne, I have just sent PDF manuals to you. Regards, George George Whitney Astro-Physics, Inc. Phone: 815-282-1513 Email: george@...

Thanks guys i just realized i posted to the AP GTO so i'll try the main AP group as well Brian

I believe your supposed to put a drop or two of oil down the thread holes of the clutch bolts on occasion. Bob

I did that too - booted up the PC and then ran the installer immediately before anything else started up-- Brian Brian Valente portfolio brianvalentephotography.com

Last night I successfully installed the driver on my obs PC. I started the PC, then immediately ran the driver installation program. The AP1200 was not even powered-up. The installation ran perfectly.

There's an instance of the A-P ASCOM driver still running for some reason, and the installer was unable to get it to quit. This is not an uncommon occurrence with ASCOM drivers in general and is

Hi Ray I tried to download the new version several times (I have a GTOCP4) but keep getting the same message: I clicked NEXT as the Automatically close the applications radio button was filled in.

I’m hoping they publish it online also so I can get a jump on things and be prepared when the mount arrives.

Based on everyone's feedback the image's purple-ish hue has been eliminated. Thank you!! https://astrob.in/8am83h/H/ steve

Thanks Marj and congratulations to all the folks at Astro-Physics on the shipping launch of what I’m sure will be another great A-P mount.

I don’t know for sure, but I assume so.

hello, nice shoot but you have a blue and purple dominante. (on my calibrated screen) Didier REDIGER-LIZLOV​ De : main@ap-gto.groups.io <main@ap-gto.groups.io> de la part de Stuart

I suspect (Ray, correct me, if wrong!) that APPM requires an external program to do the image capture for PS, as well as the actual solve, because APPM does not do image capture internally. Bryan

Steve, Yes, the old AP-900 and AP-1200 mounts had nylon clutch (cylindrical) plugs, which do flatten out “into the narrow free space between the axle and the threaded bolt shaft. It ends up

VERY nice Steven! A tad purple on my screen but could just be my screen. Stuart Heggie http://www.stuartheggie.com/ -- Stuart http://www.astrofoto.ca/stuartheggie/

I'm assuming a copy of the Mach2 manual was included in your shipment. I can't wait to start perusing the manual. A copy hasn't been posted on the Support pages yet but hopefully will be posted

Nice shot Steven.