Jack, Follow Ray’s advice to a “T”…he is the software guru. Regards, George George Whitney Astro-Physics, Inc. Phone: 815-282-1513 Email: george@...

Yesterday more people died from falling down stairs than from Coronavirus Get Outlook for iOS

Jack, No, the config folders are kept in a completely different folder so they won't be affected by uninstalling or even deleting APCC. -Ray Gralak Author of APCC (Astro-Physics Command Center):

Hi Luca, I downloaded your files. Thank you! Unfortunately I won’t be able to look at them until later today but I will get back to you as soon as possible. Best regards, -Ray Gralak Author of

Jack, You might have moved APCC to a different folder as the installer will overwrite the old version. First, uninstall all instances of APCC from add/remove folders. Then download the free

George, If I do this, won't the remocal also eliminate my virtual ports and I will have to then recreate them? Jack Huerkamp

Excellent report Terri. We had a pretty clear night, but it was fairly breezy, still got better than 0.6" over 4 hours and a low target. I also use APCC meridian limits but in my case it's to cause a

Last night my imaging session was aborted when SGP issues a failed meridian flip error due to the the telescope being on the West side of the pier before and after the flip. I have reported the issue

Jack, Use Windows uninstall to remove APCC and then download a fresh copy and install. Regards, George George Whitney Astro-Physics, Inc. Phone: 815-282-1513 Email: george@...

Good to hear that things are going good. I expect that as you fine tune the parameters of the guiding software and you move to targets higher in the sky you will see substantially better guiding

Bryan, I just went to the observatory and started the computer. In checking the installed apps, only APCC V1.8.0.4 is installed. However, there were two shortcuts listed for APCC. One called up

Finally a clear dark sky (not a hazy moon filled sky with clear spots) and I was able to use the mach2 from 8pm until around 2:30am (just before mooonrise). The mount was a pure pleasure. I was

Tony, You’re most welcome. Enjoy! Regards, George George Whitney Astro-Physics, Inc. Phone: 815-282-1513 Email: george@...

Jack A simple 'fix' would be to just the delete the icon, then create a new link based on the 1.8 executable. I had to do that for the taskbar icon which I use rather than Start menu icons Bryan

Hi Jack, The installer installs the executable over the old version, so if the old version (V1.6) was not shut down completely then V1.8 will not be able to copy over the existing version. I just

Ray, I started APCC from the icon on my start menu and saw that an update was available. I downloaded the update, shut down APCC and installed the update. I then clicked on the APCC icon on the

Brian, I will go out to the observatory and check to see if I have both versions installed. I naturally assumed that when I was prompted to upgrade from V1.6 to 1.8, the old version would be removed

Hi AJ, Thanks, I'll give that a go :) Tony

Hi Jack, Brian's advice is correct. Please check add/remove programs in Windows to make sure that you don't have APCC installed twice. Also, APCC's check for updates just provides a link to download

I am late to this discussion so I apologize if this has already been suggested. I have an Sbig 8300 stf . I had the same problem with light frames . Sbig suggested I delete the driver and re install .