Yup! Rolando

Too late. :-) Not a big deal for me to re-load the database. I assume it is corrupted. -- Dean Jacobsen http://astrophoto.net/wp/ Image Gallery - http://astrophoto.net/wp/image-gallery/

Keep the keypad powered as you change the battery. Roland

Yes, that was the problem. Cleaned the blue board connector and pins with Deoxit and it boots right up. Now to change the battery while I have the keypad open. -- Dean

Michael, Chris Erickson has spoken of it with great praise. I have no experience with it and cannot speak to it. Regards, George George Whitney Astro-Physics, Inc. Phone:

Hi George Would you recommend using a dielectricgrease on these connections to minimize / prevent corrosion ? I have never seen any corrosion on mykeypad or mount cables, but I have seen some

Excellent, thanks George. -- Dean Jacobsen http://astrophoto.net/wp/ Image Gallery - http://astrophoto.net/wp/image-gallery/ Astrobin - https://www.astrobin.com/users/deanjacobsen/

Dean, You may be experiencing some oxidation issues also. Please see our Keypad Maintenance Instructions on the Tech Support page for safe opening and checking. Plug the connectors in and out

I have a backup keypad that I need to replace the old battery and upgrade to the most recent software version. It hasn't been used for a couple of years. When plugged it into the CP3 controller for

Shailesh, Unfortunately, we don’t have any 1100s available for new orders. We started production just before our shutdown, so are just getting back into that groove. I would anticipate that we

Thanks a lot! -- I've seen things you people wouldn't believe.Attack ships on fire off the shoulder of Orion. I watched C-beams glitter in the dark near the Tannhauser gate.All those moments will be

I just saw that Marj posted a blog on Friday that communicated to us that AP is up & running with full staff today. This is great news. This implies that mount production is restarting, please correct

https://nalpak.com/skb-iseries-3i-2424-14-case/

Hello, Looks great, but where have you seen the case with foam for under $300.00? Thanks., S Roberts -- I've seen things you people wouldn't believe.Attack ships on fire off the shoulder of

I was looking recently for a case for my ap900gto mount. It turns out that the SKB iSeries 3I-2424-14 Case is a perfect fit, works well and you can get it online for less than $300 with cubed foam.

Thanks, all this help in my learning curve is great!! thanks again!

Leon I am a regular over at PHD, i put together a baseline guiding tutorial that should get you most of the way to a working setup, it's often used as a first step to getting your guiding dialed

Leon This baseline procedure was put together by one of the responders on the PHD2 forum. "A good way to ensure a solid guiding baseline is to follow the baseline guiding steps, link below. I realize

Wow, extremely helpful, thank you!!

Leon, I found this document very helpful when I was learning PHD2 - https://openphdguiding.org/phd2-best-practices/ The guiding assistant is quite good. I let it do its thing once I get set up and