Thank you, Sir. I could only find the extension cable (CABKEY--), but I managed to take apart my controller and take a photo of what I'm looking for. I've included here mostly so that I can reference

you can open the controller to see if it has a white or blue connector - call AP tell them your controller type and which connector is inside and they will send you a replacement cable which is not

I hear you on the Pacific Northwest skies. :) At that focal length I'd be hard pressed to get good data.

Hi Dominique, I think one of the real issues with the C11 Edge and imaging is when it comes time to do a meridian flip. It seems that the mirror will end up moving some small fraction which ends

AP sells new cables that you can install yourself. Rolando

I have a Mach1GTO, probably about 10 years old now, I'm the second owner for about 7 years now. The hand controller cable is cracking and splitting open for some reason. I'm looking for advice on what

Probably not. Rolando

Would it be possible for Quad TCC to work with Planewave 12.5 CDK? Peter

Using Maxim DL i connect to the telescope and when the APV2 Driver v5.30.10 appears I can press the EXPAND >>>>> button and after the expand I can not shrink back to the single window. Am I missing

That is the same scope I have. I bought it for these reasons: Planewave doesn't sell a 10" model, and I set up each night and need something lighter than 48 lbs. The focal length of the Planewave is

Thank you, Karen. I noticed there was an "accept all cookies" button at the bottom of the page. I think I'm set up now to receive notifications about the Mach2. Roland has pretty much convinced me

Tony, Have you considered AG Optical iDK scope? The focal ratio is 6.7 and no reducer or flattener necessary. Might give you less headaches than Planewave. Cost more than Planewave plus you need to

Unguided imaging? As a virtually life long imager unguided imaging is a commendable goal. Someday, when photon collection becomes short it might be possible, but there are so many factors involved

Bill, You are correct about the ridiculously short back focus of Planewave reducer: https://www.planewave.eu/fileadmin/Daten/downloads/Reducer-Manual-20140102.pdf Peter

Looks pretty solid to me.

Hello Curtis (?), You may have to search for “how to allow cookies” for the web browser you’re using. For example, I tend to use Chrome, so here’s a link to the instructions I found for

Found this Planewave 12.5 CDK using AP27TVPH: http://www.compubuild.com/astro/planewave/AP27TVPH-PW.htm Peter

Hmm. I don't know where to go from here. Thanks. What does a "notify me" button look like?

You have to allow cookies in order to see the Notify Me button. This is because in order to notify you, we must collect some contact information, namely, your email address. We cannot do that if you

Rolando: The Mach2GTO page says "Click the Notify Me button below if you are interested in this mount." What "Notify Me" button?