|
Re: M1 The Crab Nebula
toggle quoted message
Show quoted text
On Thu, 7 Nov 2019 at 09:19, steven ho <StevenHoffman53@...> wrote: Four hours over two nights, narrowband HOO recipe. --
Stuart http://www.astrofoto.ca/stuartheggie/ |
|
|
|
M1 The Crab Nebula
steven ho
Four hours over two nights, narrowband HOO recipe.
6 X 1200" of Ha 6 X 1200" of Oiii with AP1600 + CDK17 + FLI16803\ https://astrob.in/4pymlp/0/ |
|
|
|
Re: why when I plate solve is my APCC RA off by an hour
steven ho
It found park 4 nicely, thanks
From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Ray Gralak <groups3@...>
Sent: Thursday, November 7, 2019 12:54 AM To: main@ap-gto.groups.io <main@ap-gto.groups.io> Subject: Re: [ap-gto] why when I plate solve is my APCC RA off by an hour > That worked, so do you think it will find park position 4 OK?
Okay, great. Yes, parking to Park 4 will work okay. -Ray Gralak Author of APCC (Astro-Physics Command Center): http://www.astro-physics.com/index.htm?products/accessories/software/apcc/apcc Author of PEMPro V3: https://www.ccdware.com Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > -----Original Message----- > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of steven ho > Sent: Wednesday, November 6, 2019 9:52 PM > To: main@ap-gto.groups.io > Subject: Re: [ap-gto] why when I plate solve is my APCC RA off by an hour > > >If you plate solved the coordinates that would result in an absolute RA/Dec sky position. If you were off by one > hour then you could > >plate solve and sync (probably all-sky). Rememeber to temporarily turn off "Prevent Errant Recals" in APCC's > Advanced settings. > > > That worked, so do you think it will find park position 4 OK? > > > > thanks > > > > > ________________________________ > > From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Ray Gralak <groups3@...> > Sent: Thursday, November 7, 2019 12:35 AM > To: main@ap-gto.groups.io <main@ap-gto.groups.io> > Subject: Re: [ap-gto] why when I plate solve is my APCC RA off by an hour > > > After plate solving I moved the mount via APCC back an hour and found the Crab and centered it by imaging, > then > > incremental movements. > > If you plate solved the coordinates that would result in an absolute RA/Dec sky position. If you were off by one hour > then you could > plate solve and sync (probably all-sky). Rememeber to temporarily turn off "Prevent Errant Recals" in APCC's > Advanced settings. > > As to why it happened is a mystery. APCC reads the time and time zone from your computer. Maybe your > computer didn't update itself > properly if it's not running the latest Windows 10 updates. Or, are you running an old version of APCC or the > driver? > > -Ray Gralak > Author of APCC (Astro-Physics Command Center): http://www.astro- > physics.com/index.htm?products/accessories/software/apcc/apcc <http://www.astro- > physics.com/index.htm?products/accessories/software/apcc/apcc> > Author of PEMPro V3: https://www.ccdware.com > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > <https://www.siriusimaging.com/apdriver> > > > > -----Original Message----- > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of steven ho > > Sent: Wednesday, November 6, 2019 9:15 PM > > To: main@ap-gto.groups.io > > Subject: Re: [ap-gto] why when I plate solve is my APCC RA off by an hour > > > > Using APCC Go To > > After plate solving I moved the mount via APCC back an hour and found the Crab and centered it by imaging, > then > > incremental movements. > > > > > > All mount control is done via APCC pro. > > > > > > At this stage Ray I just want to get reinitialized, back to normal. At the end of the night can I park the mount (at > > position4) then adjust the mount by unlocking the clutches (if necessary) using a level to adjust the axis? > > > > > > > > ________________________________ > > > > From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Ray Gralak <groups3@...> > > Sent: Thursday, November 7, 2019 12:05 AM > > To: main@ap-gto.groups.io <main@ap-gto.groups.io> > > Subject: Re: [ap-gto] why when I plate solve is my APCC RA off by an hour > > > > > I have my hand controller plugged in but it is ALWAYS initialize from > > > APCC. No changes were made SITE information. > > > > > Right now I am imaging the Crab Nebula at RA 6:39:31.4 > > > > > > and the Crab is located at 5:35:44.96 > > > > How did you slew to the crab nebula? > > > > -Ray Gralak > > Author of APCC (Astro-Physics Command Center): http://www.astro- > > physics.com/index.htm?products/accessories/software/apcc/apcc <http://www.astro- > > physics.com/index.htm?products/accessories/software/apcc/apcc> > > Author of PEMPro V3: https://www.ccdware.com > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > <https://www.siriusimaging.com/apdriver> > > <https://www.siriusimaging.com/apdriver> > > > > > > > -----Original Message----- > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of steven ho > > > Sent: Wednesday, November 6, 2019 8:46 PM > > > To: main@ap-gto.groups.io > > > Subject: Re: [ap-gto] why when I plate solve is my APCC RA off by an hour > > > > > > I have my hand controller plugged in but it is ALWAYS initialize from APCC. No changes were made SITE > > > information. > > > > > > I am using APCC pro 1.7.1.1 > > > > > > Right now I am imaging the Crab Nebula at RA 6:39:31.4 > > > > > > and the Crab is located at 5:35:44.96 > > > > > > > > > Disregard the minute differences how can I be an hour off? > > > > > > I started from Park position 4 and physically inspected everything before beginning. > > > > > > What is wrong? > > > > > > > > > How can I get back to normal? > > > > > > > > > > > > ________________________________ > > > > > > From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Ray Gralak <groups3@...> > > > Sent: Wednesday, November 6, 2019 11:38 PM > > > To: main@ap-gto.groups.io <main@ap-gto.groups.io> > > > Subject: Re: [ap-gto] why when I plate solve is my APCC RA off by an hour > > > > > > You did not provide enough information to say what caused your issue. > > > > > > However, you should not need to do anything to APCC's time settings because APCC automatically changes > the > > > time and time zone to compensate for each other, assuming you are using version 1.7.x. > > > > > > If you did change the time zone or time offset then that caused the problem. If something else initialized the > > mount > > > (e.g. hand controller or SkyX) then that probably caused the problem. > > > > > > -Ray Gralak > > > Author of APCC (Astro-Physics Command Center): http://www.astro- > > > physics.com/index.htm?products/accessories/software/apcc/apcc <http://www.astro- > > > physics.com/index.htm?products/accessories/software/apcc/apcc> > > > Author of PEMPro V3: https://www.ccdware.com > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > <https://www.siriusimaging.com/apdriver> > > <https://www.siriusimaging.com/apdriver> > > > <https://www.siriusimaging.com/apdriver> > > > > > > > > > > -----Original Message----- > > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of steven ho > > > > Sent: Wednesday, November 6, 2019 8:03 PM > > > > To: main@ap-gto.groups.io > > > > Subject: [ap-gto] why when I plate solve is my APCC RA off by an hour > > > > > > > > This is driving me (more) crazy. My time setting are correct in site tab. > > > > > > > > -local time is correct > > > > Time offset is -5:00:00 > > > > > > > > please help me, this is so frustrating. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > |
|
|
|
Re: why when I plate solve is my APCC RA off by an hour
Ray Gralak
That worked, so do you think it will find park position 4 OK?Okay, great. Yes, parking to Park 4 will work okay. -Ray Gralak Author of APCC (Astro-Physics Command Center): http://www.astro-physics.com/index.htm?products/accessories/software/apcc/apcc Author of PEMPro V3: https://www.ccdware.com Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver -----Original Message----- |
|
|
|
Re: why when I plate solve is my APCC RA off by an hour
steven ho
>If you plate solved the coordinates that would result in an absolute RA/Dec sky position. If you were off by one hour then you could
>plate solve and sync (probably all-sky). Rememeber to temporarily turn off "Prevent Errant Recals" in APCC's Advanced settings.
That worked, so do you think it will find park position 4 OK?
thanks
From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Ray Gralak <groups3@...>
Sent: Thursday, November 7, 2019 12:35 AM To: main@ap-gto.groups.io <main@ap-gto.groups.io> Subject: Re: [ap-gto] why when I plate solve is my APCC RA off by an hour > After plate solving I moved the mount via APCC back an hour and found the Crab and centered it by imaging, then
> incremental movements. If you plate solved the coordinates that would result in an absolute RA/Dec sky position. If you were off by one hour then you could plate solve and sync (probably all-sky). Rememeber to temporarily turn off "Prevent Errant Recals" in APCC's Advanced settings. As to why it happened is a mystery. APCC reads the time and time zone from your computer. Maybe your computer didn't update itself properly if it's not running the latest Windows 10 updates. Or, are you running an old version of APCC or the driver? -Ray Gralak Author of APCC (Astro-Physics Command Center): http://www.astro-physics.com/index.htm?products/accessories/software/apcc/apcc Author of PEMPro V3: https://www.ccdware.com Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > -----Original Message----- > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of steven ho > Sent: Wednesday, November 6, 2019 9:15 PM > To: main@ap-gto.groups.io > Subject: Re: [ap-gto] why when I plate solve is my APCC RA off by an hour > > Using APCC Go To > After plate solving I moved the mount via APCC back an hour and found the Crab and centered it by imaging, then > incremental movements. > > > All mount control is done via APCC pro. > > > At this stage Ray I just want to get reinitialized, back to normal. At the end of the night can I park the mount (at > position4) then adjust the mount by unlocking the clutches (if necessary) using a level to adjust the axis? > > > > ________________________________ > > From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Ray Gralak <groups3@...> > Sent: Thursday, November 7, 2019 12:05 AM > To: main@ap-gto.groups.io <main@ap-gto.groups.io> > Subject: Re: [ap-gto] why when I plate solve is my APCC RA off by an hour > > > I have my hand controller plugged in but it is ALWAYS initialize from > > APCC. No changes were made SITE information. > > > Right now I am imaging the Crab Nebula at RA 6:39:31.4 > > > > and the Crab is located at 5:35:44.96 > > How did you slew to the crab nebula? > > -Ray Gralak > Author of APCC (Astro-Physics Command Center): http://www.astro- > physics.com/index.htm?products/accessories/software/apcc/apcc <http://www.astro- > physics.com/index.htm?products/accessories/software/apcc/apcc> > Author of PEMPro V3: https://www.ccdware.com > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > <https://www.siriusimaging.com/apdriver> > > > > -----Original Message----- > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of steven ho > > Sent: Wednesday, November 6, 2019 8:46 PM > > To: main@ap-gto.groups.io > > Subject: Re: [ap-gto] why when I plate solve is my APCC RA off by an hour > > > > I have my hand controller plugged in but it is ALWAYS initialize from APCC. No changes were made SITE > > information. > > > > I am using APCC pro 1.7.1.1 > > > > Right now I am imaging the Crab Nebula at RA 6:39:31.4 > > > > and the Crab is located at 5:35:44.96 > > > > > > Disregard the minute differences how can I be an hour off? > > > > I started from Park position 4 and physically inspected everything before beginning. > > > > What is wrong? > > > > > > How can I get back to normal? > > > > > > > > ________________________________ > > > > From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Ray Gralak <groups3@...> > > Sent: Wednesday, November 6, 2019 11:38 PM > > To: main@ap-gto.groups.io <main@ap-gto.groups.io> > > Subject: Re: [ap-gto] why when I plate solve is my APCC RA off by an hour > > > > You did not provide enough information to say what caused your issue. > > > > However, you should not need to do anything to APCC's time settings because APCC automatically changes the > > time and time zone to compensate for each other, assuming you are using version 1.7.x. > > > > If you did change the time zone or time offset then that caused the problem. If something else initialized the > mount > > (e.g. hand controller or SkyX) then that probably caused the problem. > > > > -Ray Gralak > > Author of APCC (Astro-Physics Command Center): http://www.astro- > > physics.com/index.htm?products/accessories/software/apcc/apcc <http://www.astro- > > physics.com/index.htm?products/accessories/software/apcc/apcc> > > Author of PEMPro V3: https://www.ccdware.com > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > <https://www.siriusimaging.com/apdriver> > > <https://www.siriusimaging.com/apdriver> > > > > > > > -----Original Message----- > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of steven ho > > > Sent: Wednesday, November 6, 2019 8:03 PM > > > To: main@ap-gto.groups.io > > > Subject: [ap-gto] why when I plate solve is my APCC RA off by an hour > > > > > > This is driving me (more) crazy. My time setting are correct in site tab. > > > > > > -local time is correct > > > Time offset is -5:00:00 > > > > > > please help me, this is so frustrating. > > > > > > > > > > > > > > > > > > > > > |
|
|
|
Re: why when I plate solve is my APCC RA off by an hour
Ray Gralak
After plate solving I moved the mount via APCC back an hour and found the Crab and centered it by imaging, thenIf you plate solved the coordinates that would result in an absolute RA/Dec sky position. If you were off by one hour then you could plate solve and sync (probably all-sky). Rememeber to temporarily turn off "Prevent Errant Recals" in APCC's Advanced settings. As to why it happened is a mystery. APCC reads the time and time zone from your computer. Maybe your computer didn't update itself properly if it's not running the latest Windows 10 updates. Or, are you running an old version of APCC or the driver? -Ray Gralak Author of APCC (Astro-Physics Command Center): http://www.astro-physics.com/index.htm?products/accessories/software/apcc/apcc Author of PEMPro V3: https://www.ccdware.com Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver -----Original Message----- |
|
|
|
Re: why when I plate solve is my APCC RA off by an hour
steven ho
Using APCC Go To
After plate solving I moved the mount via APCC back an hour and found the Crab and centered it by imaging, then incremental movements.
All mount control is done via APCC pro.
At this stage Ray I just want to get reinitialized, back to normal. At the end of the night can I park the mount (at position4) then adjust the mount by unlocking the clutches (if necessary) using a level to adjust the axis?
From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Ray Gralak <groups3@...>
Sent: Thursday, November 7, 2019 12:05 AM To: main@ap-gto.groups.io <main@ap-gto.groups.io> Subject: Re: [ap-gto] why when I plate solve is my APCC RA off by an hour > I have my hand controller plugged in but it is ALWAYS initialize from
> APCC. No changes were made SITE information. > Right now I am imaging the Crab Nebula at RA 6:39:31.4 > > and the Crab is located at 5:35:44.96 How did you slew to the crab nebula? -Ray Gralak Author of APCC (Astro-Physics Command Center): http://www.astro-physics.com/index.htm?products/accessories/software/apcc/apcc Author of PEMPro V3: https://www.ccdware.com Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > -----Original Message----- > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of steven ho > Sent: Wednesday, November 6, 2019 8:46 PM > To: main@ap-gto.groups.io > Subject: Re: [ap-gto] why when I plate solve is my APCC RA off by an hour > > I have my hand controller plugged in but it is ALWAYS initialize from APCC. No changes were made SITE > information. > > I am using APCC pro 1.7.1.1 > > Right now I am imaging the Crab Nebula at RA 6:39:31.4 > > and the Crab is located at 5:35:44.96 > > > Disregard the minute differences how can I be an hour off? > > I started from Park position 4 and physically inspected everything before beginning. > > What is wrong? > > > How can I get back to normal? > > > > ________________________________ > > From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Ray Gralak <groups3@...> > Sent: Wednesday, November 6, 2019 11:38 PM > To: main@ap-gto.groups.io <main@ap-gto.groups.io> > Subject: Re: [ap-gto] why when I plate solve is my APCC RA off by an hour > > You did not provide enough information to say what caused your issue. > > However, you should not need to do anything to APCC's time settings because APCC automatically changes the > time and time zone to compensate for each other, assuming you are using version 1.7.x. > > If you did change the time zone or time offset then that caused the problem. If something else initialized the mount > (e.g. hand controller or SkyX) then that probably caused the problem. > > -Ray Gralak > Author of APCC (Astro-Physics Command Center): http://www.astro- > physics.com/index.htm?products/accessories/software/apcc/apcc <http://www.astro- > physics.com/index.htm?products/accessories/software/apcc/apcc> > Author of PEMPro V3: https://www.ccdware.com > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > <https://www.siriusimaging.com/apdriver> > > > > -----Original Message----- > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of steven ho > > Sent: Wednesday, November 6, 2019 8:03 PM > > To: main@ap-gto.groups.io > > Subject: [ap-gto] why when I plate solve is my APCC RA off by an hour > > > > This is driving me (more) crazy. My time setting are correct in site tab. > > > > -local time is correct > > Time offset is -5:00:00 > > > > please help me, this is so frustrating. > > > > > > > > |
|
|
|
Re: APPM - can't connect to Driver
#APCC
Ray Gralak
I was able to connect to the scope in APPM after checking offYes. Hint: There is very good information in the help file. Clicking the "?" button in many of the control group boxes in APCC will bring you to the relevant section of the help file. -Ray Gralak Author of APCC (Astro-Physics Command Center): http://www.astro-physics.com/index.htm?products/accessories/software/apcc/apcc Author of PEMPro V3: https://www.ccdware.com Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver -----Original Message----- |
|
|
|
Re: why when I plate solve is my APCC RA off by an hour
Ray Gralak
I have my hand controller plugged in but it is ALWAYS initialize from Right now I am imaging the Crab Nebula at RA 6:39:31.4How did you slew to the crab nebula? -Ray Gralak Author of APCC (Astro-Physics Command Center): http://www.astro-physics.com/index.htm?products/accessories/software/apcc/apcc Author of PEMPro V3: https://www.ccdware.com Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver -----Original Message----- |
|
|
|
Re: Encoder video
Peter Nagy
|
|
|
|
Re: why when I plate solve is my APCC RA off by an hour
steven ho
I have my hand controller plugged in but it is ALWAYS initialize from APCC. No changes were made SITE information.
I am using APCC pro 1.7.1.1
and the Crab is located at 5:35:44.96
Disregard the minute differences how can I be an hour off?
What is wrong?
How can I get back to normal?
From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Ray Gralak <groups3@...>
Sent: Wednesday, November 6, 2019 11:38 PM To: main@ap-gto.groups.io <main@ap-gto.groups.io> Subject: Re: [ap-gto] why when I plate solve is my APCC RA off by an hour You did not provide enough information to say what caused your issue.
However, you should not need to do anything to APCC's time settings because APCC automatically changes the time and time zone to compensate for each other, assuming you are using version 1.7.x. If you did change the time zone or time offset then that caused the problem. If something else initialized the mount (e.g. hand controller or SkyX) then that probably caused the problem. -Ray Gralak Author of APCC (Astro-Physics Command Center): http://www.astro-physics.com/index.htm?products/accessories/software/apcc/apcc Author of PEMPro V3: https://www.ccdware.com Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > -----Original Message----- > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of steven ho > Sent: Wednesday, November 6, 2019 8:03 PM > To: main@ap-gto.groups.io > Subject: [ap-gto] why when I plate solve is my APCC RA off by an hour > > This is driving me (more) crazy. My time setting are correct in site tab. > > -local time is correct > Time offset is -5:00:00 > > please help me, this is so frustrating. > |
|
|
|
APPM - can't connect to Driver
#APCC
I keep getting an error when I try to connect to the scope in APPM. I can connect to my mount through MaximDL. I can connect to the camera fine. When I click on Driver to set it up I get this error: "Error Opening ASCOM setup dialog. Please check that the Astro Physics V2 Telescope driver is installed. Com Object that has been separated from its underlying RCW cannot be used.
I was able to connect to the scope in APPM after checking off Auto Config and Update Now in APCC. I presume that's all that was needed? Thank you Claude |
|
|
|
Re: why when I plate solve is my APCC RA off by an hour
Ray Gralak
You did not provide enough information to say what caused your issue.
toggle quoted message
Show quoted text
However, you should not need to do anything to APCC's time settings because APCC automatically changes the time and time zone to compensate for each other, assuming you are using version 1.7.x. If you did change the time zone or time offset then that caused the problem. If something else initialized the mount (e.g. hand controller or SkyX) then that probably caused the problem. -Ray Gralak Author of APCC (Astro-Physics Command Center): http://www.astro-physics.com/index.htm?products/accessories/software/apcc/apcc Author of PEMPro V3: https://www.ccdware.com Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver -----Original Message----- |
|
|
|
why when I plate solve is my APCC RA off by an hour
steven ho
This is driving me (more) crazy. My time setting are correct in site tab.
-local time is correct Time offset is -5:00:00 please help me, this is so frustrating. |
|
|
|
Encoder video
i was told that there is a video on encoder installation. I would like to see it before tackling the installation. I can’t find it on the Astro Physics site. Can anyone help me find it?
I found a video on YouTube that was made in 2018. The video covers part one of the installation. It says there will be a part two video but I don't see it. Is there a video covering the entire installation? |
|
|
|
Re: APCC subgroup rather than in main group?
I think subgroups are a great feature, as well.
Ray and I discussed setting up an APCC subgroup, but have not made a decision. Sometimes there is overlap with other discussions. We’ll be giving it more thought.
Clear Skies,
Marj Christen Astro-Physics, Inc 11250 Forest Hills Rd Machesney Park, IL 61115 Phone: 815-282-1513 Fax: 815-282-9847 www.astro-physics.com
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io]
On Behalf Of Stuart
Sent: Wednesday, November 06, 2019 4:57 PM To: main@ap-gto.groups.io Subject: Re: [ap-gto] APCC subgroup rather than in main group?
On Wed, 6 Nov 2019 at 17:49, Robert Berta <biker123@...> wrote:
|
|
|
|
Re: APCC subgroup rather than in main group?
toggle quoted message
Show quoted text
On Wed, 6 Nov 2019 at 17:49, Robert Berta <biker123@...> wrote: One of the new features of groups.io is that you can have sub groups within the main group. Currently there is one for hand controller BETA work. --
Stuart http://www.astrofoto.ca/stuartheggie/ |
|
|
|
APCC subgroup rather than in main group?
One of the new features of groups.io is that you can have sub groups within the main group. Currently there is one for hand controller BETA work.
I always thought it would be great to have all the conversations about APCC in one sub group which would make it easier to find something...both in that sub group and the main group which wouldn't have so much "clutter" that isn't specifically about the mounts. Do others have any opinions on this suggestion? |
|
|
|
Re: Problem with GOTOs in Keypad
For historical reasons, the keypad updates require the top RS232 port on the control box.
|
|
|
|
Re: Problem with GOTOs in Keypad
Joe Renzetti <axnyslie@...>
The updater is not working. I follow all the instructions and it gets to "AWAITING HOST" and it stalls there. The program says "Sending page" and nothing. Database loader tool is 4.12. Keypad is v 4.19.3. I m connected to the right COM port. I am connected to the CP4 via USB2 as I have no RS-232 cable.
Joe |
|
|