Very sharp detail—a nice rendition of this object. BTW it is in Hydra (just barely) not Centaurus.

That is correct. The camera does not do anything as far as mount functions. It's like an eyepiece with a crosshair. You can rotate the crosshair all you want, it has no effect on the mount tracking

Ron, Thank you for sharing. Very nice work. Sam Saeed https://www.decanstars.com From: <main@ap-gto.groups.io> on behalf of Ron Kramer <ronkramer1957@...> Reply-To:

Ron, Thank you for sharing. Very nice work. Sam Saeed https://www.decanstars.com From: <main@ap-gto.groups.io> on behalf of Ron Kramer <ronkramer1957@...> Reply-To:

Thank you Rolando, I should have phrased the question better. I’m most concerned with unguided exposures rather than pointing. Just wanted to make sure that unguided exposures won’t be

Ron, As Dean said, please just give us a call at 815.282.1513 during the day. The Grease Kits are not available to purchase on our website because we only sell them to people who own AP mounts,

You have some impressive stuff. What camera are you using? Roland

STILL looking for this elusive Grease Kit. Link? search will not reveal it. Price? details? -- Ron Kramer https://www.facebook.com/Ron.R.Kramer

I bought APCC pro and planned on a pointing model. But once I put the Mach1 to use I found I did not need a pointing model. I've not found any pointing error. If there is some because I unclutched

Pointing is a function between your planetarium program and the mount. You camera does not come into the equation. Rolando

Hello, I’m about to purchase the APCC Pro software from Astro-Physics for my AP1100 mount. I do a have a quick question regarding the pointing model. Will the model be affected by the

I made a case to transport the counterweight shaft of my (now sold) AP1200 out of PVC Schedule 80 pipe fittings – was a nice snug fit and worked perfectly. Picture is here:

Ron, All the information that you seek is in the Greasing Instructions that come with the Grease Kit. Regards, George George Whitney Astro-Physics, Inc. Phone: 815-282-1513 Email:

That is a very nice one! Rolando

As far as springs, nothing to worry about on your gearbox. Just use the lever to back off the worm, then remove the 3 screws that hold the gearbox to the mount axis. That's it in a nutshell. Of course

Wish I could see that one from Michigan. My nearest cousin. LIGHTS only, OSC, stacked in APP then levels and color done in pshop. https://www.flickr.com/photos/158199519@N08/49807321776/ MACH1 -

Thank you all. Rolando

yeah that's a given - thanks for the heads up. Anything else due to the springs? see previous questions. -- Ron Kramer https://www.facebook.com/Ron.R.Kramer

Ron, Now that our production staff has returned, the turnaround time for repairs is pretty quick. There is no standard cost for a “ tune up” since it depends on what is involved and if parts

very nice one ! Didier REDIGER-LIZLOV​ De : main@ap-gto.groups.io <main@ap-gto.groups.io> de la part de uncarollo2 <chris1011@...> via groups.io <chris1011@...> Envoyé : mercredi 10 juin 2020