Hi, I have a Mach2. From what I have understood, APCC can take into account refraction when using a model. I wonder if it is possible to create a "transparent model", whose only effect would be to

Hi, some of you may remember back a few years that I ordered a case from MyCaseBuilder.com with a large, no, HUGE SKB case that held the 1100GTO set to 42° Latitude, DOVELM162, CP4, Keypad, cables

Rolando, I cleaned and lubricated the complete RA drive mechanism, worm-wheel, worm, and spur gears. I even examined the spur gears with an engraver's loupe, not finding any problems. I examined the

Howard, Since April 19th I have seen a few other people post about this issue of the park and home buttons in the MacOS version of Sky Safari not performing the Home, Park3 and Park 4 to the

Ok, we have an enhanced version of the Smart Meridian Flip plugin for NINA that can read an APCC MLM file to know where the limits are and how early or late to flip at the current declination. It'll

Hi Steve, As Peter said, ideally both connection methods should behave about the same way. But it might also depend on several factors. Like how crowded is the said switch (how many ports are used at

I noticed that with Sky Safari Pro 6 on my iPad that if I pick a date in 2021 and check the sunrise on that date then step through to 2121 the sunrise gets later and later. It shouldn't. Looks like

I have Netgear Ethernet switch and it's used to connect to CP4 and Optec FocusLynx auto focus hub and never had issues with this setup. It shouldn't matter whether you use 2 Ethernet ports from

Our tech team has been working on much expanded and reorganized documentation that should be ready for release soon. Hang in just a bit longer. Clear Skies, Marj Christen Astro-Physics 11250

+1 here too. Sébastien De : main@ap-gto.groups.io <main@ap-gto.groups.io> de la part de Benoit Schillings <benoit.schillings@...> Envoyé : 10 mai 2021 15:55 À : main@ap-gto.groups.io

I would second the interest to see an updated documentation for the command list -- benoit

Thanks Mike, that is very helpful. Yes, I did provide date and time but do not get coordinates until the unpark - good to know that an extra un-park does not cause issues.

I have the same issue as the original post. The activeX control is not installing. I uninstalled, rebooted, disabled anti-virus, ensured the activex installer service is running, right-clicked in the

Hi Brent, Yes, the :RC3# command means 600x, rather than 1200x, beginning P02-01. 200x was added between 64x and 600x to fill a gap. This means 1200x is now :RC4#. If you use the Keypad or APCC,

Ah, this must be new. I looked on WMR's store for one of these a few months ago and they didn't have one. Great, so there's now a decent commercial source for these for people who don't want to buy

Another good source for all things PowerPole is Powerwerx.com. You may already know this, but one thing to pay attention to for barrel jack connectors is the inside diameter of the barrel jack. Some

Yep! That's exactly what I do, too. XT60 is an odd choice of connector for the UPBv2 but I guess it's smaller than powerpole and more secure than coaxial plugs.

Yeah… When the UPBv2 arrived , I ordered a bag of XT60 parts from Amazon along with some Powerpole pigtails (or maybe they were extension cables). Then I soldered up the XT60 to the existing crimped

I run a remote imaging system at SRO that has a AP3600/12.5” RC and TAK TOA-150 that has been running for several years now. I discovered mid-April that the CP4 was connected to a switch instead of

To be more specific, I am satellite tracking with the goal of keeping the object on a small chip for creating a video. My algorithm queries the mount's position then calculates the satellite's current